NI RFmx Waveform Creator 2.3.1 Full Win32/64ENG RFmx波形创造器2.3.1完整版

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI RFmx Waveform Creator 2.3.1 Full Win32/64ENG RFmx波形创造器2.3.1完整版

RFmx Waveform Creator
RFmx Waveform Creator可帮您创建、可视化和再现通用型、蜂窝、连接性、物联网(IoT)、航空航天/防卫测试应用程序的波形。
RFmx Waveform Creator是一款应用软件，您可以用来创建通用的和基于标准的波形，用于设计、验证和生产测试应用。借助这款软件，您可以结合信号发生器以交互方式生成波形，或保存开放的、未锁定的波形文件，用于借助自动仪器进行回放或仿真波形。该软件内置有标准的信号配置；您也可以修改、保存和加载自己的自定义波形参数。此外，在预览时域、频域和功率域的信号特征之前，您可以使用RFmx Waveform Creator来应用信号减损、滤波、波峰因子降低(CFR)等功能。

发布日期:
2017/10/16
包含的版本:
2.3.1完整版
受支持的操作系统:
Windows 10
Windows Server 2008 R2 64-bit
Windows 8.1
Windows 7
语言:
英文
应用程序位数：
32/64位
校验和：
文件大小: 280510472 字节 (267.52 MB)
修改日期: 2017-10-13 00:31
MD5: b77c6fe60bdcd82a3f314debd9459534
SHA1: 5ca7e1c2ee43fa9066d6d5971a929c52f60868ea
SHA256: 55ab14e24bad92a683b3cdf68106c5e46272a8ed77d7f36bc51ed553a63d297e
CRC32: 40807a7d

百度网盘和NI官方下载地址：
注册登录视觉论坛用户，购买附件查看下载地址
RFmx Waveform Crreator 2.3.1.txt (534 Bytes, 下载次数: 0, 售价: 10 元)

2022-4-11 15:07 上传

点击文件名下载附件

NI-RFmx Waveform Creator 2.3.1 Readme

September 2017

This file contains important information about NI-RFmx Waveform Creator and is organized into the following sections:

Supported Hardware

System Requirements

Installed Software, Documentation, and Examples

Executable

Documentation

Product Security and Critical Updates

Uninstalling/Modifying NI-RFmx Waveform Creator

Known Issues

Automating the Installation of NI Products

Using NI Software with Microsoft Windows 10

Using NI Software with Microsoft Windows 8.1

Legal Information

---

Supported HardwareVector Signal Generators

• NI PXIe-5673
• NI PXIe-5673E
  

Device-specific information about these modules is included in the NI RF Vector Signal Generators Help.

Vector Signal Transceivers

• NI PXIe-5644R
• NI PXIe-5645R
• NI PXIe-5646R
• NI PXIe-5840
  

Device-specific information about these modules is included in the NI RF Vector Signal Transceivers Help.

System RequirementsSupported Operating Systems

NI-RFmx Waveform Creator 2.3.1 supports the following operating systems:

• Windows 10/8.11/7 SP12 (32-bit and 64-bit)
• Windows Server 2008 R2 SP12 (64-bit)
  

1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.

2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.

Note  NI-RFmx Waveform Creator 2.3.1 does not support Windows Server non-R2 editions.

NI recommends that you have the most recent service pack for your operating system installed.

Minimum Requirements

• Processor—Intel i3 or equivalent
• RAM—2 GB*
• Microsoft Internet Explorer 5.5 or later
• A screen resolution of 1300 x 700 with 256 colors
• Windows 10/8.1/7, with all available critical updates and service packs
• Adobe Reader
  

*Depending on the amount of data acquired and/or processed, a larger amount of memory may be required.

Recommended System

• Processor—Intel i5 or equivalent
• RAM—4 GB*
• Microsoft Internet Explorer 5.5 or later
• A screen resolution of 1300 x 700
• Windows 10/8.1/7, with all available critical updates and service packs
• Adobe Reader
  

*Depending on the amount of data acquired and/or processed, a larger amount of memory may be required.

Other Required Software

• NI-RFSG 14.5 or later
  

Installed Software, Documentation, and ExamplesInstalled Software

• is an alias for the following National Instruments file folder location:
  
  • (32-bit OS) Program Files\National Instruments
  • (64-bit OS) Program Files (x86)\National Instruments for 32-bit programs
    
• is an alias for the following National Instruments file folder location: Users\Public\Public Documents\National Instruments
  

File Locations

Item	Installed Location
DLLs
Examples	\examples

Executable

Select Start»All Programs»National Instruments»NI-RFmx Waveform Creator»NI-RFmx Waveform Creator to launch the NI-RFmx Waveform Creator.

Documentation

Documentation for NI-RFmx Waveform Creator is located at Start»All Programs»National Instruments»NI-RFmx Waveform Creator»NI-RFmx Waveform Creator Documentation. The documentation set is composed of the following documents.

Document	Format	Description
NI-RFmx Waveform Creator Help	HTML/Windows Help	This help file is an HTML version of a traditional user manual that provides an introduction to the NI-RFmx Waveform Creator.
NI-RFmx Waveform Creator User Guide	HTML (.chm)	This help file provides detailed information on the different modulation schemes that NI-RFmx Waveform Creator supports.
NI-RFmx Waveform Creator Getting Started Guide	HTML (.chm)	This help file provides a quick look at the waveform setup procedure.
NI-RFmx Waveform Creator 2.3.1 Readme	HTML (this document)	Information about supported hardware and operating systems, new features, fixed issues, and legal notices.

For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.

Uninstalling/Modifying NI-RFmx Waveform Creator

For Windows 7, complete the following steps:

• Launch the Control Panel by selecting Start»Control Panel.
• Double-click Programs and Features.
• Select National Instruments Software.
• Click the Uninstall/Change button.
• Select NI-RFmx Waveform Creator 2.3.1 from the dialog box that appears.
• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

For Windows 10/8.1, complete the following steps:

• Right-click on the Start button.
• Select Control Panel.
• Select Programs» Programs and Features.
• Select National Instruments Software.
• Click the Uninstall button.
• Select NI-RFmx Waveform Creator 2.3.1 from the dialog box that appears.
• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

Caution  Several of the software packages listed above are shared with other NI software packages. If you attempt to remove a piece of software that something else is dependent on, a message launches to warn you about the software dependencies. You can choose to either uninstall all of the software or to leave the shared software installed. If you choose to uninstall the shared software, some of your other NI software may no longer function correctly.

Note  Do not attempt to uninstall by manually deleting files.

Known Issues

You can access the software and documentation known issues list online. Refer to the NI-RFmx Waveform Creator 2.3.1 Known Issues at ni.com for an up-to-date list of known issues in NI-RFmx Waveform Creator 2.3.1.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

• For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
• For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.
• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My NI Installer?.
  

Using NI Software with Microsoft Windows 10

Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.

Using NI Software with Microsoft Windows 8.1

When you install National Instruments software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.

---

Legal Information

Copyright

© 2017 National Instruments. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

• Notices are located in the \_Legal Information and directories.
• EULAs are located in the \Shared\MDF\Legal\license directory.
• Review \_Legal Information.txt for information on including legal information in installers built with NI products.
  

U.S. Government Restricted Rights

If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.

IVI Foundation Copyright Notice

Content from the IVI specifications reproduced with permission from the IVI Foundation.

The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

377066B-01