NI LabVIEW 2023 Q3 and Drivers Win11 64bitEng LV2023Q3和驱动版64位英文版-基于LabVIEW2023Q3

石鑫华视觉

NI LabVIEW 2023 Q3 and Drivers Win11 64bitEng LV2023Q3和驱动版64位英文版-基于LabVIEW2023Q3

LabVIEW and Drivers
LabVIEW是专为测试、测量和控制应用而设计的系统工程软件，可快速访问硬件和数据信息。
LabVIEW编程环境简化了工程应用的硬件集成，使您可以采用一致的方式采集NI和第三方硬件的数据。LabVIEW降低了编程的复杂性，使您可以将注意力集中在重要的工程问题上。LabVIEW还提供了拖放式工程用户界面创建和集成的数据查看器，可帮助您即时可视化结果。为了将所采集的数据转化为真正的商业成果，您可以使用内含的数学和信号处理IP来开发数据分析和高级控制算法，或者复用其他各种工具的程序库。为了确保与其他工程工具的兼容性，LabVIEW可以支持与其他软件和开源语言的互操作性，并能够复用这些软件和语言的程序库。

含驱动程序的安装包，则包含了大部分的NI驱动程序、扩展模块工具包，以及部分应用程序。安装包要小于软件平台套件SPB。详情可参考相应的自述文件说明。

英文版中的软件、工具包、模块全是英文版本的，不会包含其它中文、法语、德语、日语、韩语之类的。另外在SPB64位版本中（2019后区分32/64位的SPB版本），相应的软件、工具包的版本，当有64位时，优先使用64位的版本。如果没有64位可用，则使用32位的。各开发平台、模块、工具包、应用软件，通常使用当前的最新版，如SPB2023 Q1的LabVIEW为2023 Q1版。如果相应的2023年版本没有更新，则会使用之前的最近的版本，如VBAI仍然是2020版的，旧版的工具包、驱动、应用程序等，通常都不支持最新的LabVIEW，具体请参考各工具包的自述文件。本视觉论坛NI SPB2023 Q1仅提供64位英文版32位英文版以及32位中文版网盘下载。其它版本如德语、法语、日语、韩语的版本不提供。因为文件比较大且难下载，很多时候下载好多次校验和都是错的，需要重新下载，也许一下就是几天一星期半个月。

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

LabVIEW 2023 Q3 and Drivers x64Eng
发布日期：2023-7-18
包含的版本：2023 Q3，版本号V23.3.0/23.5.0
受支持的操作系统：
Windows 11
Windows Server 2022 64-bit
Windows 10 64-bit
Windows Server 2016 64-bit
Windows Server 2019 64-bit
语言：英文English
应用程序位数：64位
包含驱动软件：是
校验和：
文件大小: 43586691072 字节 (40.59 GB)
修改日期: 2023-07-19 09:51
MD5: b57ec9ae19447182e8464dd4470e47ad
SHA1: b8f3243297ab776407243d53b4b1ed8030fd1250
SHA256: 3518b173d71cd6caf25149553548dfb2a91430001ef460ed8b325fc3f493b754
CRC32: c71004cd

百度网盘和NI官方网站下载：
请注册登录机器视觉论坛会员，购买附件查看下载地址
LabVIEW and Drivers2023Q3X64Eng.txt (586 Bytes, 下载次数: 0, 售价: 40 元)

2023-9-5 08:27 上传

点击文件名下载附件

LabVIEW 2023 Q3 Readme

July 2023

This file contains installation instructions and compatibility information for LabVIEW 2023 Q3.

You can find more release information on ni.com.

• LabVIEW Release Notes: Known issues, bugs fixed since the last release, and other notes about this release
• LabVIEW Manuals: New features, behavior changes, and other documentation
  

---

System Requirements

Supported Operating Systems

Installation Instructions

Product Security and Critical Updates

LabVIEW 2023 Q3 (64-bit)

Accessing the Documentation

Finding Examples

Automating the Installation of NI Products

Using NI Software with Microsoft Windows 11

Unsupported Windows Operating Systems

---

System Requirements

LabVIEW 2023 Q3 has the following requirements:

Windows	Run-Time Engine	Development Environment
Processor	Pentium 4M/Celeron 866 MHz (or equivalent) or later (32-bit) Pentium 4 G1 (or equivalent) or later (64-bit)	Pentium 4M (or equivalent) or later (32-bit) Pentium 4 G1 (or equivalent) or later (64-bit)
RAM	256 MB	1 GB
Screen Resolution	1024 x 768 pixels	1024 x 768 pixels
Disk Space	620 MB	5 GB (includes default drivers)
Color Palette	N/A	LabVIEW and the LabVIEW Help contain 16-bit color graphics. LabVIEW requires a minimum color palette setting of 16-bit color.
Temporary Files Directory	N/A	LabVIEW uses a directory for storing temporary files. NI recommends that you have several megabytes of disk space available for this temporary directory.
Adobe Reader	N/A	You must have Adobe Reader 7.0 or later installed to search PDF versions of all LabVIEW manuals.

Supported Operating Systems

LabVIEW 2023 Q3 supports the following operating systems:

• Windows 11
• Windows 10
• Windows Server 2022
• Windows Server 2019
• Windows Server 2016
  

Installation Instructions

Download the LabVIEW installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.

Notes

• If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.
• Use the serial number that is included with your software to activate LabVIEW. For more information on LabVIEW activation, refer to NI Software Activation.
  

If you install software using the LabVIEW Platform media, insert the LabVIEW Platform media and follow the onscreen instructions to install LabVIEW, modules, toolkits, and drivers. When prompted, log in to your NI User Account to activate your NI products. If you are managing your license with a volume license server, you should receive your volume license file by email.

Are you upgrading from a previous version of LabVIEW?

Refer to Upgrading LabVIEW for information about protecting existing VIs and projects before installing a new version of LabVIEW, as well as upgrade and compatibility issues and a complete list of new features in LabVIEW 2023 Q3.

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/r/critical-updates for information about critical updates from NI.

LabVIEW 2023 Q3 (64-bit)

Use the LabVIEW Platform media to install modules and toolkits supported by LabVIEW 2023 Q3 (32-bit) and LabVIEW 2023 Q3 (64-bit). LabVIEW (64-bit) provides access to more memory than a 32-bit operating system or what a 32-bit application can provide. LabVIEW (64-bit) is available in English only.

Supported Hardware

Refer to the NI website for information about drivers compatible with LabVIEW 2023 Q3 (64-bit). Refer to the specific hardware documentation for more information about compatibility with LabVIEW (64-bit).

Supported Modules and Toolkits

LabVIEW 2023 Q3 (64-bit) supports a limited number of modules and toolkits. The following table compares the modules and toolkits supported by LabVIEW (32-bit) and LabVIEW (64-bit).

Product	LabVIEW 2023 Q3 (32-bit)	LabVIEW 2023 Q3 (64-bit)
Advanced Signal Processing Toolkit1	✓	✓
Database Connectivity Toolkit1	✓	✓
Datalogging and Supervisory Control Module	✓	—
Desktop Execution Trace Toolkit for Windows1	✓	✓
Digital Filter Design Toolkit1	✓	✓
FPGA Module	✓	✓
Real-Time Module	✓	✓
Report Generation Toolkit for Microsoft Office1	✓	✓
Sound and Vibration Toolkit	✓	✓
Unit Test Framework Toolkit1	✓	✓
VI Analyzer Toolkit1	✓	✓
Vision Development Module	✓	✓
1These modules and toolkits are only available with the LabVIEW Professional Development System.

Refer to the readme of each product for more information about 32-bit and 64-bit support, system requirements, installation instructions, and activation. For information about products not listed in the previous table, refer to the user documentation of those products.

Accessing the Documentation

Refer to the LabVIEW Help, accessible by selecting Help»LabVIEW Help from LabVIEW, for information about LabVIEW 2023 Q3.

Finding Examples

Select Help»Find Examples from LabVIEW to launch the NI Example Finder. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.

If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.

For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.

Using NI Software with Microsoft Windows 11

Microsoft Windows 11 is the latest version of the Windows operating system and features significant changes compared to previous versions. For more information about NI support for Windows 11, refer to NI Product Compatibility for Microsoft Windows 11.

Unsupported Windows Operating Systems

LabVIEW no longer supports Windows Vista/XP/7/8.x, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit https://www.ni.com/r/win32bitsupport.

LabVIEW 2023 Q1 and Drivers Readme

January 2023

This file contains installation instructions and compatibility information for LabVIEW 2023 Q1 and Drivers.

You can find more release information on ni.com.

• LabVIEW Release Notes: Known issues, bugs fixed since the last release, and other notes about this release
• LabVIEW Documentation: New features, behavior changes, and other documentation
  

System Requirements

Supported Operating Systems

Products Included in the LabVIEW 2023 Q1 and Drivers Installer

Installation Instructions

Product Security and Critical Updates

Supported Hardware

Finding Examples

Automating the Installation of NI Products

Using NI Software with Microsoft Windows 11

Unsupported Windows Operating Systems

NI no longer supports Phar Lap ETS Real-Time Operating System

---

System Requirements

LabVIEW 2023 Q1 and Drivers has the following requirements:

Windows	Run-Time Engine	Development Environment
Processor	Pentium 4M/Celeron 866 MHz (or equivalent) or later (32-bit) Pentium 4 G1 (or equivalent) or later (64-bit)	Pentium 4M (or equivalent) or later (32-bit) Pentium 4 G1 (or equivalent) or later (64-bit)
RAM	256 MB	1 GB
Screen Resolution	1024 x 768 pixels	1024 x 768 pixels
Disk Space	620 MB	5 GB (includes default drivers)
Color Palette	N/A	LabVIEW and the LabVIEW Help contain 16-bit color graphics. LabVIEW requires a minimum color palette setting of 16-bit color
Temporary Files Directory	N/A	LabVIEW uses a directory for storing temporary files. NI recommends that you have several megabytes of disk space available for this temporary directory
Adobe Reader	N/A	You must have Adobe Reader 7.0 or later installed to search PDF versions of all LabVIEW manuals

Supported Operating Systems

LabVIEW 2023 Q1 and Drivers supports the following operating systems:

• Windows 11
• Windows 10
• Windows Server 2022
• Windows Server 2019
• Windows Server 2016
  

Products Included in the LabVIEW 2023 Q1 and Drivers InstallerApplication Software

Product	Version	Bitness
G Web Development Software1	2022 Q3	64-bit
LabVIEW	2023 Q1	32-bit and 64-bit
1 Evaluation mode only

Note: This product no longer supports LabVIEW NXG. Refer to LabVIEW NXG on ni.com for more information about LabVIEW NXG Life-Cycle Dates and driver version support.

Add-ons

Product	Version	Bitness
JKI VI Package Manager	2022 Q3	32-bit and 64-bit
LabVIEW Datalogging and Supervisory Control Module	2023 Q1	32-bit
LabVIEW Datalogging and Supervisory Control Runtime	2023 Q1	32-bit
LabVIEW FPGA Compilation Tool for Vivado 2021.1	2022 Q3	64-bit
LabVIEW FPGA Compile Farm Toolkit	2023 Q1	32-bit and 64-bit
LabVIEW FPGA Module	2023 Q1	32-bit and 64-bit
LabVIEW Real-Time Module	2023 Q1	32-bit and 64-bit
Vision Acquisition Software (includes IMAQ, IMAQdx, IMAQ I/O)	2023 Q1	32-bit and 64-bit
Vision Development Module	2023 Q1	32-bit and 64-bit

Note: The LabVIEW Professional Development System installs the LabVIEW Advanced Signal Processing Toolkit, LabVIEW Desktop Execution Trace Toolkit, LabVIEW Digital Filter Design Toolkit, LabVIEW Unit Test Framework Toolkit, LabVIEW VI Analyzer Toolkit, LabVIEW Database Connectivity Toolkit and the LabVIEW Report Generation Toolkit. You can locate the readmes for these products in the labview\readme directory.

Drivers

Product	Version	Bitness
FlexRIO with Integrated I/O	2023 Q1	32-bit and 64-bit
FlexRIO with Modular I/O	2023 Q1	32-bit and 64-bit
IVI Compliance Package	2022 Q3	32-bit and 64-bit
NI CompactRIO	2023 Q1	32-bit and 64-bit
NI-488.2	2022 Q4	32-bit and 64-bit
NI-DAQmx	2023 Q1	32-bit and 64-bit
NI-DCPower	2022 Q3	32-bit and 64-bit
NI-DMM	2023 Q1	32-bit and 64-bit
NI-FGEN	2023 Q1	32-bit and 64-bit
NI-SCOPE	2023 Q1	32-bit and 64-bit
NI-Serial	21.5	32-bit and 64-bit
NI-SWITCH	2023 Q1	32-bit and 64-bit
NI-Sync	2023 Q1	32-bit and 64-bit
NI-VISA	2022 Q3	32-bit and 64-bit
NI-XNET	2023 Q1	32-bit and 64-bit
PXI Platform Services	2023 Q1	32-bit and 64-bit

Note: Some drivers included with previous versions of LabVIEW and Drivers are not included with this release. Visit ni.com/downloads for the latest driver versions.

Microsoft Visual Studio Support

If you are using the LabVIEW .NET Class Library, .NET Framework 4.0 (minimum) is required. The LabVIEW 2023 Q1 and Drivers .NET Class Library can be used with Visual C# or Visual Basic .NET in any Visual Studio version that can target .NET Framework 4.0 or .NET Framework 4.5.

To use the .NET API, you must install the .NET class libraries or the .NET wrapper in addition to the NI device driver. For information about versions of the .NET Framework and the drivers each supports, as well as the download location of the installer files, refer to .NET Resources for NI Hardware and Software.

Installation Instructions

Download the LabVIEW installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using Package Manager.

Notes

• If Windows Update is enabled, the installation process might hang if Windows Update interferes with the installation of Microsoft Visual C++ 2015 Run-Time. Visit ni.com/r/exjq43 for more information and steps to resolve this issue.
• Use the serial number that is included with your software to activate LabVIEW. For more information on LabVIEW activation, refer to Activating a Product.
  

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about NI products. For information about critical updates from NI, refer to Available Critical and Security Updates for NI Software.

Supported Hardware

Visit NI Hardware and Operating System Compatibility to view driver, desktop operating system, and real-time operating system support for individual hardware devices.

To view information for your device:

• Select your hardware model in the dropdown list on the page to view compatibility information for your device.
• Type your hardware model number in the dropdown list on the web page to filter the list of available devices.
  

Note: Some compatibility information may only be available in the archive attached to the NI Hardware and Operating System Compatibility page. For historic driver and OS support information, refer to the readme for the relevant driver version.

Finding Examples

Select Help»Find Examples from LabVIEW to launch the NI Example Finder. LabVIEW examples for LabVIEW are located in the \LabVIEW 2022\examples directory. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.

If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.

For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.

Using NI Software with Microsoft Windows 11

Microsoft Windows 11 is the latest version of the Windows operating system and features significant changes compared to previous versions. For more information about NI support for Windows 11, refer to NI Product Compatibility for Microsoft Windows 11.

Unsupported Windows Operating Systems

LabVIEW no longer supports Windows Vista/XP/7/8.x, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit https://www.ni.com/r/win32bitsupport.

NI No Longer Supports Phar Lap ETS Real-Time Operating System

NI Software no longer supports Phar Lap ETS Real-Time Operating System. Versions of this product that ship after May 1, 2022, may not install or execute correctly on this operating system. For high-level information on the support roadmap for Phar Lap and its replacement, NI Linux Real-Time, visit ni.com/r/xf35k1. To find out what hardware is supported on PXI controllers running NI Linux Real-Time, visit ni.com/r/b7g5wi.