宝视纳Basler-Basler blaze固件6.0.0~blaze-firmware-6.0.0.zip

石鑫华视觉

宝视纳Basler-Basler blaze固件6.0.0~blaze-firmware-6.0.0.zip

Basler blaze Firmware 6.0.0
2024年1月
6.0.0
Basler blaze ToF相机的固件版本中包括blaze固件更新包、固件更新工具指南以及安装说明。
此固件版本支持HDR功能。
在更新固件时，Basler建议也同时更新主机软件。如需详细了解固件和主机软件之间的依赖性关系，请参阅固件版本说明。

Basler blaze固件6.0.0
文件名: blaze-firmware-6.0.0.zip
文件大小: 131253809 字节 (125.17 MB)
修改日期: 2024-10-24 18:29
MD5: 138fc21dac092c61f9159eff2d656b06
SHA1: 9659d20f87e99b84cbfae4203ba6275289408089
SHA256: 732c46fb7e2515661f6a0b2cdc7e944e8be5324887cac728d64dedf6d6f1dca7
CRC32: 101f9821

Basler官方下载：

游客，如果您要查看本帖隐藏内容请回复

百度网盘下载：
链接：https://pan.baidu.com/s/1lDa5FW3-kBAazP_eTQWN5g
提取码：

游客，如果您要查看本帖隐藏内容请回复

RELEASE NOTES
==============

Basler blaze Firmware

Note: Firmware versions not listed in this document are not released publicly.
      They are created for internal purposes only and don’t contain any changes
      that would affect the behavior of the camera. On occasion, cameras with
      such a firmware version may be shipped to customers. Updating cameras to a
      higher version than the latest publicly available firmware is not required
      since such an update would not change camera functionality or add new
      features.

Version:           6.0.0
Release date:      2024-09-10
Preceding release: 5.1.0
Products affected: blaze-101 (order number 107796), hardware revisions 09 to 20
                   blaze-102 (order number 108711), hardware revisions 01 to 07
                   blaze-112 (order number 109245), hardware revisions 01 to 03

NEW FEATURES
-------------

* Added the ComponentIDValue parameter. This is a unique identifier that
  indicates the type of the component selected by the ComponentSelector
  parameter.
* Added the Scan3dProjectionModel parameter that describes the mapping
  function used for distortion correction.
* Added the Trigger Thermal Drift Stabilization feature. If the trigger mode with
  thermal drift stabilization is enabled, the camera continuously acquires
  images in the background at a constant frame rate (fps) and sends the next
  available image when triggered. This reduces the thermal offset error and
  improves the absolute accuracy.

CHANGES
--------

* Fixed the ZOffsetOriginToCameraFront parameter. It now describes the distance
  between the front of the housing and the optical center of the camera.
* Fixed a bug that sometimes caused FrameTriggerWait not to be set to true
  when executing AcquisitionStart.
* Fixed a bug that caused the upper limit to be adjusted incorrectly when
  using the shiftable working range and the entire measuring range couldn't
  be used.

COMPATIBILITY INFORMATION
--------------------------

*WARNING:* Because of bugs in pylon 7.1 and pylon 7.2, avoid using the blaze
  camera with pylon 7.1. or pylon 7.2. Using the latest pylon version or using
  pylon 7.0 or below is recommended.
  When using pylon 7.1, image acquisition may stop unexpectedly. When using
  pylon 7.2, image acquisition may be unstable.

*WARNING:* Once updated, the firmware can't be downgraded to a firmware
  version below 4.2.

*WARNING:* To update the camera's firmware to firmware version 4.0 or above,
  the camera's current firmware version has to be at least 2.3.0.
  If the current firmware version is below 2.3.0, you first have to update
  the camera to firmware version 3.0.1. Afterwards, you can perform an update
  with the latest camera firmware version. Contact Basler support to get an
  update package for firmware version 3.0.1.

The latest Basler software for blaze cameras can be downloaded here:
http://www.baslerweb.com/blaze-software