注册登陆后可查看附件和大图，以及购买相关内容
您需要 登录 才可以下载或查看，没有账号？注册会员
x
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI Vision Development Module 2012 Win32/64Eng 视觉开发模块VDM2012 适用LabVIEW2012
NI的机器视觉开发模块（VDM）Vision Development Module 2012，仅含英文版。可以应用于32位的X86 Windows系统，也可以用于64位的X64 Windows系统。如果要想有更好的效果，建议使用Win7 X64+LabVIEW2012 64位版+VDM，多配内存与高级CPU。
NI Vision Development Module 2012 supports LabVIEW 8.6, 2009, 2010, 2011 and 2012, Visual Studio 2005 and 2008, and LabWindows/CVI 8.1 or later.
百度网盘下载：
EXE版：
链接: 请注册视觉论坛会员登录后购买附件下载查看
提取码: 请购买附件下载查看
ISO版：
链接: 请注册视觉论坛会员登录后购买附件下载查看
提取码: 请购买附件下载查看
NI官方下载地址：
请购买附件下载查看
VDM2012.txt
(365 Bytes, 下载次数: 74, 售价: 10 元)
NI Vision Development Module 2012 ReadmeJune 2012 This file contains important information about National Instruments Vision Development Module and is organized into the following sections: General Information
New Features
Updates and Improvements
System Requirements
Installation Instructions
How to Activate the NI Vision License
Deploying Vision Applications
Automating the Installation of NI Products
Known Issues
Documentation and Examples
Refer to the Machine Vision Web site at ni.com/vision for the latest information about the NI Vision Development Module. General InformationInstalling this program may remove previous versions of the NI Vision Development Module that are currently installed. The NI Vision Development Module 2012 supports LabVIEW 8.6, 2009, 2010, 2011, and 2012; Visual Studio 2005 and 2008; and LabWindows™/CVI™ 8.1 or later. The installer specifically allows side-by-side installations of NI Vision for each of the supported versions of LabVIEW, enabling you to use the NI Vision Development Module with multiple versions of LabVIEW. National Instruments recommends that you install LabVIEW, LabVIEW Real-Time, or any other supported development environment, before installing the NI Vision Development Module. Note: The NI Vision Development Module overwrites existing NI Vision examples and NI Vision VIs. Move modified examples or VIs that you want to save to another directory before installing the NI Vision Development Module. New FeaturesThis release of the NI Vision Development Module includes the following new features: - Support for LabVIEW 2012 (32-bit)
- Support for LabVIEW 2012 (64-bit)
- Support for binocular stereo vision
- Support for the ISO 15415-2004 and AIM DPM-1-2006 Data Matrix grading standards
- Improvements to the IMAQ Learn Camera Model VI and IMAQ Learn Distortion Model VI. These VIs are more robust and have the ability to suppress noisy calibration grid points.
NI Vision Assistant includes the following additions: - LabVIEW code generated from Vision Assistant is optimized for parallel execution
- Improved support for 2D barcodes:
- Support for the ISO 15415-2004 and AIM DPM-1-2006 Data Matrix grading standards
- Support for advanced Data Matrix parameters
- The Data Matrix, PDF417, and QR barcode reading steps are now combined into one Read 2D Barcode step
Updates and ImprovementsThe following list describes issues in previous versions of the NI Vision Development Module that are fixed in this release. If you have a CAR ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of the NI Vision Development Module. | ID | Fixed Issue | | 216996 | The IMAQ Cast VI does not properly cast 16-bit images to 8-bit images. | | 233278 | The IMAQ Extract Contour VI sporadically returns internal error 0xBFF60569. | | 310570 | When a VI containing an image with vision information runs twice, it crashes. | | 308871 | The IMAQ Cooccurrence Matrix VI returns an empty array. | | 312465 | When learning a pattern matching template, the template may cause a crash if the template mask covers the entire image. | | 323636 | Running some Vision VIs in a timed loop causes LabVIEW 2011 to crash. | | 327954 | The IMAQ Block Statistics VI returns NaN for the standard deviation calculation for U16 Images. | | 324852 | An OCR Character Set File created in LabVIEW 64-bit cannot be opened in LabVIEW 32-bit. | | 322706 | The Nonlinear Calibration example cannot be opened when the Vision Development Module 2011 is installed. | | 326053 | Casting an image from U16 to U8 with the IMAQ Cast VI returns incorrect results when using # Shift = 8. | | 330432 | An insufficient number of calibration grid points can cause camera model calibration to take too long. | | 334516, 331987 | The IMAQ Setup Learn Geometric Pattern 2 VI causes LabVIEW to crash if the image height is larger than 1600 pixels. | | 341746 | During calibration, the position of optical center may be incorrect. | | 336243 | The NI Calibration Training Interface hangs if saved templates are loaded and learned again. | | 332998 | The IMAQ Fit Contour Polynomial VI crashes when the Polynomial Order is greater than or equal to 25 on a closed contour. | | 349815 | imaqFindCircularEdge2 has a run-time error: 0x6C965AB7. | | 358238 | The IMAQ ImageBorderSize VI crashes when called with the image that was previously disposed. | | 356436 | The IMAQ Find Straight Edge 3 VI causes LabVIEW to hang when the ROI Descriptor is not correct. | | 349901 | The IMAQ GetPointsOnContour VI might crash under specific circumstances. |
System RequirementsThe development computer must meet the following system requirements to run the NI Vision Development Module: | | Minimum | Recommended | | Processor | 233 MHz Pentium or equivalent | Pentium 4/M or equivalent | | Memory | 256 MB RAM | 512 MB RAM | | Display | 1,024 × 768 resolution video adapter with a 16-bit display | 1,024 × 768 resolution video adapter with a 24- or 32-bit display | | Free Hard Disk Space | 1.4 GB | | Operating System | Windows 7/Vista/XP (32-bit)/Server 2008 R2/Server 2003 R2 (32-bit) | | Browser | Microsoft Internet Explorer 6.0 or later |
Remote Target SupportNI Vision Development Module 2011 SP1 was the last version of NI Vision Development Module to provide support for the NI 1762 Smart Camera and the NI 1764 Smart Camera. New software features of NI Vision Development Module will not work on these devices. Backward compatibility for existing applications will be maintained. Installation InstructionsInstalling from the LabVIEW 2012 Platform DVDsIf you purchased LabVIEW 2012, you can install all of your LabVIEW products—including the NI Vision Development Module—using the LabVIEW Platform DVDs. To request additional LabVIEW Platform DVDs, refer to the National Instruments Web site. Installing from the NI Vision Development Module Installation MediaComplete the following steps to install the NI Vision Development Module from the NI Vision Development Module installation media. - Log on as an administrator or as a user with administrator privileges.
- Insert the NI Vision Development Module installation media.
- If you do not have autorun enabled, double-click autorun.exe. If you have autorun enabled, autorun.exe runs automatically.
- Follow the onscreen instructions.
- (Optional) Activate NI Vision Development Module when prompted by the installer, or activate at a later time using the NI License Manager.
Installing from an NI Software Suite or NI Product BundleIf you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product. How to Activate the NI Vision LicenseWhen you run an NI Vision application for the first time, it prompts you to activate a license for the product. If you do not activate a valid license, the NI Vision application will run in Evaluation Mode and continue to prompt you to activate a license on each subsequent launch. Complete the following steps to activate the NI Vision license through an Internet connection. - Run the product you want to license.
- Click Yes when prompted to interactively activate your product.
- Ensure that Automatically activate through a secure Internet connection is selected, and click Next.
- Enter the product serial number, and click Next.
- Enter your registration information, and click Next.
Tip: Enter your email address to receive a copy of your activation code for your records. Deploying Vision ApplicationsDeployment refers to developing an application so that it can be distributed, or deployed, on a different computer than the one on which the application was developed. The NI Vision Development Module provides everything you need to deploy custom NI Vision applications to target computers. The NI Vision Development Module provides the following options: - The ability to create NI Vision Run-Time Engine installers, which integrate with the LabVIEW Application Builder, applications built in LabWindows/CVI, or a custom installer.
- The ability to install the NI Vision Run-Time Engine directly from the Vision Development Module CD.
- One NI Vision Run-Time License, which allows you to install a custom application on a single machine.
The NI Vision Development Module installer contains the run-time engine installer for NI Vision. The run-time engine installer is installed at \Run-Time Engine, where is the location to which the NI Vision Development Module is installed. Visit the Drivers and Updates section of ni.com to download software upgrades for NI Vision and the NI Vision Run-Time installers. Purchasing NI Vision Deployment LicensesYou must purchase an NI Vision Run-Time License (part number 778044-03) for each target machine onto which you want to install your custom NI Vision application, even if you install the NI Vision Run-Time Engine directly from the NI Vision Development Module CD. The NI Vision Development Module CD ships with one run-time license. Contact a National Instruments sales representative or visit ni.com to purchase additional run-time licenses. Note: Additional NI Vision Run-Time Licenses do not include a CD. To install additional licenses, use the original NI Vision Development Module CD and the serial number provided by National Instruments. Using the NI Vision Run-Time EngineYou can call the NI Vision Run-Time Engine installer from the application installer. If you create the application installer with the LabVIEW Application Builder or with LabWindows/CVI, you can direct the installer to call the NI Vision Run-Time Engine installer. Refer to the LabVIEW Help for more information about the LabVIEW Application Builder. Refer to the NI LabWindows/CVI Help for more information about building and distributing LabWindows/CVI applications. You can also direct a custom application installer to call the NI Vision Run-Time Engine installer. Refer to the documentation that came with the installer software to learn how to call executables from the custom installer. If you are using a custom installer, call the NI Vision Run-Time Engine installer at the end of the installation procedure because the installer may require the system to be restarted. To use the NI Vision Run-Time Engine installer, you must add /qn as a command line argument to the run-time engine installer. For example, enter \Run-Time Engine\vision2012rte.exe /qn to run the NI Vision Run-Time Engine installer, where is the location to which NI Vision is installed. Distributing LabVIEW ApplicationsThe NI Vision Run-Time Engine installer does not install LabVIEW VIs. If you use the LabVIEW Application Builder to create an application (EXE) or dynamic link library (DLL), the Application Builder automatically includes the VIs used by the application. If you distribute a VI, you must include all subVIs that comprise the top-level VI. You must include the appropriate LabVIEW Run-Time Engine as part of the installation. Refer to the LabVIEW Help for more information about viewing the hierarchy of VIs and for more information about using the LabVIEW Run-Time Engine. Distributing LabWindows/CVI ApplicationsIn addition to including the NI Vision Run-Time Engine with the installer, you must include the appropriate LabWindows/CVI Run-Time Engine. Refer to the NI LabWindows/CVI Help for more information about creating an executable, creating a dynamic link library, and distributing applications. Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software. If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software. For more information, refer to the following KnowledgeBase articles: - For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
- For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
- To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Known IssuesYou can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in the NI Vision Development Module. Documentation and ExamplesThe NI Vision Development Module documentation set consists of the following manuals and help files: - NI Vision Concepts Help—Describes the basic concepts of image analysis, image processing, and machine vision. This document also contains in-depth discussions about imaging functions for advanced users.
The following sections describe the documents available for each application development environment and where to find example programs. NI Vision for LabVIEW Documentation- NI Vision for LabVIEW Help—Describes how to create machine vision and image processing applications in LabVIEW using the NI Vision Development Module. It also describes how to create a real-time vision application using NI Vision and the LabVIEW Real-Time Module.
This document also contains reference information about NI Vision VIs and details about how to use NI Vision with LabVIEW. In LabVIEW, select Help»NI Vision for LabVIEW Help. Note: The NI Vision for LabVIEW Help combines the NI Vision for LabVIEW User Manual and NI Vision for LabVIEW VI Reference Help from previous releases into one document. - NI Example Finder—Illustrates common applications you can create with NI Vision. In LabVIEW, select Help»Find Examples. Click the Help button in the NI Example Finder to display the NI Example Finder Help.
NI Vision for LabWindows/CVI Documentation- NI Vision for LabWindows/CVI User Manual—Describes how to create machine vision and image processing applications in LabWindows/CVI using the NI Vision Development Module.
- NI Vision for LabWindows/CVI Function Reference Help—Contains reference information about NI Vision for LabWindows/CVI functions.
- Function panel help within LabWindows/CVI—Allows you to right-click within each Vision function to access help for that function, control, function class, and function library. Function panels are installed at is the location to which LabWindows/CVI is installed.
- Example programs for specific applications are installed at \Samples\Vision.
NI Vision for .NET DocumentationThe NI Vision .NET documentation merges into the NI Measurement Studio Help. The NI Measurement Studio Help integrates into the Visual Studio Combined Help Collection under the Measurement Studio node in the Table of Contents. In order for links from Measurement Studio help topics to .NET Framework help topics to work, you must install the product documentation for Visual Studio, which installs the MSDN Library. This requires a secondary installation during the Visual Studio installation process. The NI Measurement Studio Help is in the Microsoft Help 2.0 format and requires a Microsoft Help 2.0 viewer to be displayed. A Microsoft Help 2.0 viewer is installed with both Microsoft Visual Studio and the Microsoft .NET Framework SDK. The SDK is freely available from MSDN at http://www.microsoft.com/downloads. If you do not have either of these products, you will need a standalone Microsoft Help 2.0 viewer to display the documentation. Some Help 2.0 viewers are available for download, such as Helpware's H2Viewer. NI Vision Assistant Documentation- NI Vision Assistant Tutorial—Describes the Vision Assistant software interface and guides you through creating example image processing and machine vision applications.
- NI Vision Assistant Help—Contains descriptions of Vision Assistant features and functions and provides instructions for using them. In Vision Assistant, select Help»Online Help.
- NI Classification Training Interface Help—Contains information about how to use the NI Classification Training Interface to classify binary samples. In the NI Classification Training Interface, select Help»Online Help.
- NI Color Classification Training Interface Help—Contains information about how to use the NI Color Classification Training Interface to classify color samples. In the NI Color Classification Training Interface, select Help»Online Help.
- NI OCR Training Interface Help—Contains information about how to use the NI OCR Training Interface to learn characters, save character sets, and verify characters by comparing them to a reference character. In the NI OCR Training Interface, select Help»Online Help.
- NI Texture Training Help—Contains information about how to use the NI Texture Training Interface to train a texture classifier file for use in texture defect detection applications. In the NI Texture Training Interface, select Help»Online Help.
- NI Calibration Training Help—Contains information about how to use the NI Calibration Training Interface to select and create a calibration for use in machine vision applications. In the NI Calibration Training Interface, select Help»Online Help.
- NI Vision Template Editor Help—Contains information about how to use the NI Vision Template Editor to learn and edit template images that you can use with pattern matching, geometric matching, and golden template comparison functions. In the NI Vision Template Editor, select Help»Online Help.
Copyright© 2012 National Instruments Corporation. All rights reserved. Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation. National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction. End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations: - Notices are located in the directories.
- EULAs are located in the \Shared\MDF\Legal\license directory.
- Review \_Legal Information.txt for information on including legal information in installers built with NI products.
TrademarksNational Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. PatentsFor patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
| 
发表于 2012-11-24 10:55:58
发表于 2013-4-7 19:30:16
