石鑫华视觉论坛

 找回密码
 注册会员
查看: 718|回复: 0

[NI软件产品] NI Spectral Measurements Toolkit 2.6.0 Win32/64Eng NI频谱测量工具包SMT2.6.0

[复制链接]
  • TA的每日心情
    奋斗
    昨天 09:21
  • 签到天数: 3366 天

    连续签到: 26 天

    [LV.Master]2000FPS

     楼主| 发表于 2022-12-1 16:43:54 | 显示全部楼层 |阅读模式 来自:广东省东莞市 电信

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有账号?注册会员

    x
    NI Spectral Measurements Toolkit 2.6.0 Win32/64Eng NI频谱测量工具包SMT2.6.0

    Spectral Measurements工具包
    Spectral Measurements工具包为时域和频域信号提供频谱分析和频谱测量工具。
    Spectral Measurements工具包是LabVIEW、C和.NET的一款附加软件,提供了用于频谱分析和频谱测量的功能和工具。借助该工具包,您可以对时域数据执行连续(实时)或块(无损)缩放FFT处理,以计算所需的结果,例如原始FFT、幅度谱、功率谱、互谱、频率响应和频谱图。使用Spectral Measurements工具包,您可以对处理后的数据,比如频带功率、相邻信道功率(ACP)、占用带宽(OBW)、峰值搜索等执行频谱测量。Spectral Measurements工具包还提供了高级处理参数,包括分辨率带宽(RBW)、加窗、滤波、单位转换和各种频谱均值法。

    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

    视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

    NI Spectral Measurements Toolkit 2.6.0
    发布日期:2011/06/02
    包含的版本:2.6.0
    受支持的操作系统
    Windows 7 (32-bit)
    Windows 7 (64-bit)
    Windows Vista (32-bit)
    Windows Vista (64-bit)
    Windows XP
    Windows Server 2003 (32-bit)
    Windows Server 2008 (32-bit)
    语言:English
    应用程序位数:32/64位
    校验和:
    文件大小: 630206730 字节 (601.01 MB)
    修改日期: 2022-03-25 17:12
    MD5: 00b8fcfdfc1b736f97f1c475b5462e47(秒传)
    SHA1: a9f00451191693242b2b30acace749bcfd8d89be
    SHA256: a2237e703a35e928f53fe5dbbb075df521c657f81782efa79caa87c272fe6300
    CRC32: a2c4b008

    百度网盘和NI官方下载地址:
    请注册登录视觉论坛账号,购买附件查看下载地址
    SMT2.6.0.txt (499 Bytes, 下载次数: 0, 售价: 10 元)

    NI Spectral Measurements Toolkit Readme
    Version 2.6

    Thank you for using the NI Spectral Measurements Toolkit (SMT). This file contains important information about this release and is organized into the following sections:
    • New Features
    • Supported Hardware
    • System Requirements
    • Licensing
    • Supported Drivers
    • Installed File Names and Locations
    • Examples
    • Documentation
    • Uninstalling/Modifying the Spectral Measurements Toolkit
    • Known Issues
    • Bug Fixes
    New FeaturesNI Spectral Measurements Toolkit 2.6 includes the following new features:
    • Support for Windows Vista (64-bit) and Windows 7 (64-bit) operating systems.
    • Support for generating and applying pulse shaping filter on user-defined regions of a given spectrum through the addition of a new palette-level VI—SMT Filter Spectrum VI.
    • Addition of the SMT Spectrum Peak Search (Advanced) VI.
    • Addition of the SmtFilterSpectrum and SmtSpectrumPeakSearchMaxNPeaks functions.
    NI Spectral Measurements Toolkit 2.5 includes the following new feature:
    Japanese localization for LabVIEW application programming interface (API) and documentation.
    NI Spectral Measurements Toolkit 2.4 includes the following new features:
    • Support for LabVIEW Real-Time Module 8.5 or later (on PXI systems).
    • Support for NI PXIe-5663 RF vector signal analyzer.
    • Addition of the SMT Adjacent Channel Power (Advanced) VI and the SmtAdjacentChannelPowerAdvanced function.
    Supported HardwareVector Signal Analyzers
    • NI PXI-5660
    • NI PXI-5661
    • NI PXIe-5663
    • NI PXIe-5663E
    • NI PXIe-5665
    Digitizers
    • NI PXI-5621
    • NI PXI-5620
    • NI PXI-5122
    • NI PXI-5124
    • NI PCI-5122
    • NI PCI-5124
    • NI PXI-5922
    • NI PXI-5142
    • NI PXIe-5122
    • NI PXIe-5622

    System Requirements
    This section lists the minimum system requirements and the recommended system for using this toolkit.
    Minimum System
    Before installing the Spectral Measurements Toolkit software, verify that your system meets the following requirements:
    • Windows 7 (32-bit)/Windows 7 (64-bit)/Windows Vista (32-bit)/Windows Vista (64-bit)/Windows XP/Windows Server 2003 (32-bit)/Windows Server 2008 (32-bit), with all available critical updates and service packs
    • 3 GB of free hard drive space
    • 256 MB of RAM
    • NI LabVIEW 8.5.1, 8.6.1, 2009 SP1 (32-bit), 2009 SP1 (64-bit), 2010 (32-bit), or 2010 (64-bit), Full Development System or Professional Development System
    • LabWindows™/CVI™ 8.1, 8.5, 8.5.1, 9.0, 2009, or 2010
    Recommended System
    For optimal performance, NI recommends that your system meets the following requirements:
    • 4 GB of free hard drive space
    • 1 GB of RAM
    Note:  The SMT Run-Time Engine must be installed on systems running applications built using the Spectral Measurements Toolkit and LabWindows/CVI. The SMT Run-Time installer is available on the NI Spectral Measurements Toolkit CD in the NISMTCVIRTE folder (setup.exe).
    Licensing
    For details on activating the NI Spectral Measurements Toolkit, refer to the Activating Your Software section in the LabVIEW help file. The evaluation mode for the NI Spectral Measurements Toolkit is 30 days from the date of installation. You can access all the features of the toolkit in the evaluation mode. Refer to the software license file for further licensing requirements.
    Note:  Licensing is available only for LabVIEW.

    Supported Drivers
    Install all instrument drivers for the hardware you intend to use before installing the Spectral Measurements Toolkit. The toolkit supports the following drivers:
    • NI-RFSA 2.1 or later
    • NI-SCOPE 3.4 or later
    If you install one or more of the aforementioned drivers after installing the Spectral Measurements Toolkit 2.6, driver-specific toolkit examples and palette VIs are not present. To install these driver-specific files, you can run the "Modify" function from the Spectral Measurements Toolkit installer. To do so, follow the instructions found in the Uninstalling/Modifying the Spectral Measurements Toolkit section.
    Installed File Locations
    Verify that LabVIEW and/or CVI and any supported drivers you intend to use with the toolkit are installed on your system prior to installing the toolkit. Install the toolkit by inserting the toolkit CD into your drive and clicking setup.exe.
    Note:  When you run setup.exe to install the software from the CD, you are prompted to choose whether you want to always trust software from National Instruments. If you do not select this option, your installation may be interrupted by one or more Microsoft Windows security dialog boxes. However, if you run the installer in silent mode from the command line, you will not receive this prompt, and the installer will automatically install NI's Software Publisher Certificate to the your Windows Trusted Publisher Store. If you do not want to make this change to your Windows Trusted Publisher Store, do not choose this installation method.
    Documents folder location, :
    • Windows XP: \All Users\Documents
    • Windows Vista/7: \Public\Documents


    FilesInstalled Location
    LabVIEW
    VIs\vi.lib\addons\Spectral Measurements Toolset
    Examples\examples\Spectral Measurements Toolset
    LabWindows/CVI
    Header Files\National Instruments\Shared\CVI\Include
    Static Libraries\National Instruments\Shared\CVI\Bin\msvc
    \National Instruments\Shared\CVI\Bin\msvc64
    .lfp/.sub Files\National Instruments\Shared\CVI\Bin
    Examples\National Instruments\CVI\samples\smt
    C
    Header Files\National Instruments\Shared\ExternalCompilerSupport\C\include
    Import Library\National Instruments\Shared\ExternalCompilerSupport\C\lib32\msvc
    \National Instruments\Shared\ExternalCompilerSupport\C\lib64\msvc
    Notes On Creating Modulation Executables Using Spectral Measurements Toolkit and LabVIEW Application Builder, available on the National Instruments Web site, contains information about which VIs must be included as dynamic VIs in LabVIEW Application Builder for the executable file to run correctly.
    Examples
    LabVIEW users can use the NI Example Finder to search or browse examples. Spectral Measurements Toolkit examples are classified by keyword, so you can search for a particular device or measurements function. With LabVIEW running, select Help»Find Examples to launch the NI Example Finder. The NI Example Finder offers two ways to access all installed LabVIEW example VIs (including Spectral Measurement Toolkit examples) and their descriptions.
    • Click the Browse tab to locate examples by task at Toolkits and Modules»Spectral Measurements or by directory structure at Spectral Measurements Toolset.
    • Click the Search tab to search all installed examples by keyword. For example, searching for "spectral" can be used to locate Spectral Measurements Toolkit examples.
    The NI Example Finder is also available in LabWindows/CVI by selecting Help»Find Examples.
    Note:  Links to the Spectral Measurements Toolkit examples are also available from the Start menu at All Programs»National Instruments»Spectral Measurements»LabVIEW Support and All Programs»National Instruments»Spectral Measurements»CVI Support.
    Documentation
    The product documentation is available at Start»All Programs»National Instruments»Spectral Measurements. Visit ni.com/manuals for the latest versions of product documentation. The documentation for the Spectral Measurements Toolkit includes the following items:
    • NI LabVIEW Spectral Measurements Toolkit Help
    • NI Spectral Measurements Toolkit Function Reference Help
    • NI Spectral Measurements Toolkit User Guide
    • NI Spectral Measurements Toolkit Readme (this document)
    Uninstalling/Modifying the Spectral Measurements Toolkit
    For Windows XP, complete the following steps:
    • Launch the Control Panel by selecting Start»Control Panel.
    • Double-click Add or Remove Programs.
    • Select National Instruments Software.
    • Click Change/Remove.
    • Select NI LabVIEW Spectral Measurements Toolkit 2.6 from the dialog box that appears.
      Note:  To uninstall or modify the Spectral Measurements Toolkit for LabWindows/CVI, select NI LabWindows/CVI Spectral Measurements Toolkit 2.6 from the dialog box that appears.
      Note:  To uninstall or modify the Spectral Measurements Toolkit Runtime for LabWindows/CVI, select NI LabWindows/CVI Spectral Measurements Toolkit Runtime 2.6 from the dialog box that appears.
    • Click Remove to uninstall the product; click Modify to change the components that are installed.
    For Windows 7/Vista, complete the following steps:
    • Launch the Control Panel by selecting Start»Control Panel.
    • Double-click Programs and Features.
    • Select National Instruments Software.
    • Click the Uninstall/Change button.
    • Select NI LabVIEW Spectral Measurements Toolkit 2.6 from the dialog box that appears.
      Note:  To uninstall or modify the Spectral Measurements Toolkit for LabWindows/CVI, select NI LabWindows/CVI Spectral Measurements Toolkit 2.6 from the dialog box that appears.
      Note:  To uninstall or modify the Spectral Measurements Toolkit Runtime for LabWindows/CVI, select NI LabWindows/CVI Spectral Measurements Toolkit Runtime 2.6 from the dialog box that appears.
    • Click Remove to uninstall the product; click Modify to change the components that are installed.
    Known Issues
    You can access the software and documentation known issues list online. Refer to the NI Spectral Measurements Toolkit 2.6 Known Issues List web page on the National Instruments Web site for an up-to-date list of known issues in NI Spectral Measurements Toolkit 2.6.
    Bug Fixes
    The following issue was fixed between Spectral Measurements Toolkit 2.5.1 and Spectral Measurements Toolkit 2.6.
    IDFixed Issue
    34854The SMT peak search routine does not detect peaks that fall on the power spectrum boundaries.
    The following issue was fixed between Spectral Measurements Toolkit 2.5 and Spectral Measurements Toolkit 2.5.1.
    IDFixed Issue
    198949Japanese language LabVIEW support may get installed for non-Japanese LabVIEW.

    Copyright
    ©2004—2011 National Instruments Corporation. All rights reserved.
    Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
    Trademarks
    National Instruments, NI, ni.com, CVI, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.
    Patents
    For patents covering the National Instruments products, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your CD, or ni.com/patents.
    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW HALCON图像处理入门教程(第二版)
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程11种全套
    《LabVIEW Vision函数实例详解》教程-NI Vision所有函数使用方法介绍,基于NI VISION2020,兼容VDM21/22/23/24

    QQ|石鑫华视觉论坛 |网站地图

    GMT+8, 2024-11-3 08:14

    Powered by Discuz! X3.4

    © 2001-2024 Discuz! Team.

    快速回复 返回顶部 返回列表