注册登陆后可查看附件和大图，以及购买相关内容
您需要 登录 才可以下载或查看，没有账号？注册会员
x
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI-488.2Driver20.0 Windows/Real-Time Full 美国国家仪器IEEE488.2仪器驱动20.0 Windows/实时系统离线安装完整版下载
NI-488.2为使用NI GPIB控制器和带有GPIB端口的NI嵌入式控制器的客户提供支持。
NI-488.2仪器驱动程序包含了几个实用程序，用于应用程序开发和调试。NI-488.2包含了可自动处理所有总线管理的高级命令，因而用户就无需了解GPIB硬件产品或IEEE 488.2协议的编程细节。为了提供最大灵活性和功能，NI-488.2还包含了底层命令。
20.0版自述文件有中文版的，官方说明中也说支持中文, 日语, 英文, 韩语等，但是翻看资源包的Documents目录下，只有英文和日文的，估计仍然是只有安装界面与自述文件有中文，内在的资源仍然是没有中文化的。
NI-488.2 20.0
发布日期：
20-5-15
包含的版本:
20.0.0
受支持的操作系统:
Windows 7 (SP1) 32-bit
Windows 7 (SP1) 64-bit
Windows 8.1 32-bit
Windows 8.1 64-bit
Windows 10 32-bit
Windows 10 64-bit
Windows Embedded Standard 7 (SP1)
Windows Server 2008 R2 (SP1) 64-bit
Windows Server 2012 R2 64-bit
语言:
中文
德语
日语
法语
英文
韩语
在线安装版校验和5.37MB：
(MD5)
fa0457d4830a6d18ce3656ff58ad5ae5
(SHA256)
b0f9f10d73965e1621662b3358e366bca8463855b95ab96ff49430985ae87e4e
离线安装版校验和1.23GB：
(MD5) d56c0f225b5a863feaa5fe20006419f4
(SHA256) 928b3cf21bb5d528321837782492a4ae04813fd51925c31fd0c9b5dc07910bc6
百度网盘下载和NI官方下载地址：
请登录视觉论坛会员后购买附件下载查看
NI-488.2 20.0.txt
(570 Bytes, 下载次数: 2, 售价: 10 元)
NI-488.2 for Windows 20.0 ReadmeApril 2020 This file contains important information about NI-488.2, including installation instructions, new features, and a partial list of bugs fixed for NI-488.2. If you plan to use LabVIEW NXG, refer to LabVIEW NXG Support and Considerations.
Supported Operating Systems Application Software Support Supported Hardware Installation Instructions Product Security and Critical Updates Known Issues Enhancements and Bug Fixes - Version 20.0
- Version 19.5
- Version 19.0
- Version 18.5
- Version 17.6
- Version 17.0
- Version 16.0
- Version 15.5
- Version 15.0
- Version 14.0
Accessing the Help LabVIEW NXG Support and Considerations Automating the Installation of NI Products Using NI Software with Microsoft Windows 10 Using NI Software with Microsoft Windows 8.1 NI-488.2 Will Drop Support for Windows 7 (32- and 64-Bit), Windows Server 2008 R2, and All 32-Bit Windows Operating Systems in 2021 Legal Information
Supported Operating SystemsNI-488.2 supports the following operating systems: - Windows 10/8.11/7 SP12
- Windows Server 2016
- Windows Server 2012 R21
- Windows Server 2008 R2 SP12
- NI Linux® Real-Time
- NI Real-Time Phar Lap ETS
1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates. 2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update. Note Refer to NI-488.2 Will Drop Support for Windows 7 (32- and 64-Bit), Windows Server 2008 R2, and All 32-Bit Windows Operating Systems in 2021 for information about future OS support. Known Compatibility Issues with Windows 8NI-488.2 has known compatibility issues with the Fast Startup feature introduced in Windows 8. Leaving Fast Startup enabled can cause GPIB hardware and NI-488.2 driver software to function improperly. To prevent problems with installing or removing hardware, National Instruments recommends disabling Fast Startup. The NI-488.2 for Windows, Version 15.5 installer disables Fast Startup by default. For more information about this issue, visit ni.com/info and enter the Info Code Win8FastStartup. Known Driver Issues with Windows UpgradeUpgrading Windows on a system with NI-488.2 already installed renders DOS Support unusable. To fix this issue, run installation repair. If the driver cannot attach to GPIB hardware, run installation repair a second time. Win16 and DOS SupportWin16 and DOS support are available on 32-bit Windows operating systems. Note In 2016 NI-488.2 dropped support for Windows Vista, Windows XP, Windows Server 2003, and installations of Windows 7 without any service packs. NI-488.2 20.0 will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI-488.2 20.0 to an unsupported OS. Additionally, after installing NI-488.2 20.0, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS. For more information about the changes to our OS support for 2016, visit ni.com/r/OSSupport2016. Note Support for Windows 32-bit operating systems may require disabling physical address extension (PAE). To learn how this might affect your system and what actions you might need to take, visit ni.com/info and enter the Info Code PAESupport. Application Software SupportNI-488.2 20.0 supports the following application software versions, including service packs. If you are not using NI application software, refer to Microsoft Visual Studio Support. Application Software | Versions Supported by NI-488.2 | | NI-VISA | 20.01 | | LabVIEW | 2017, 2018, 2019, 2020 | | LabVIEW Real-Time Module | 2017, 2018, 2019, 2020 | | LabVIEW NXG | 5.0 | | LabWindows™/CVI™ | 2012, 2013, 2015, 2017 | | Measurement Studio | 2012, 2013, 2015 | | 1 Any version of NI-VISA prior to 5.1 on your system may cause NI-488.2 usability issues. Upgrade to NI-VISA version 5.1 or later before using any NI-488.2 devices. |
Note: NI I/O Trace 17.0 and later support NI-488.2 17.0. Previous versions of NI I/O Trace do not support NI-488.2 17.0 or later. Microsoft Visual Studio SupportIf you are using the NI-488.2 .NET Class Library, .NET Framework 4.0 (minimum) is required. The NI-488.2 .NET Class Library can be used with Visual C# or Visual Basic .NET in any Visual Studio version that can target .NET Framework 4.0 or .NET Framework 4.5. To use the .NET API, you must install the .NET class libraries or the .NET wrapper in addition to the NI device driver. For information about versions of the .NET Framework and the drivers each supports, as well as the download location of the installer files, refer to National Instruments .NET Support. Microsoft Visual Basic 6.0 SupportNI-488.2 supports 32-bit Visual Basic 6.0 application development. For more information, refer to the Language-Specific Programming Instructions topic in the NI-488.2 Help. Unmanaged C/C++ SupportNI-488.2 supports 32-bit and 64-bit GPIB applications using Microsoft Visual C++ 2005 and later. Microsoft Visual C/C++ 6.0 and Microsoft Visual Studio .NET 2003 only support 32-bit GPIB applications. For more information, refer to the Language-Specific Programming Instructions topic in the NI-488.2 Help. Supported HardwareThe following list details the hardware models supported in NI-488.2: GPIB Hardware | Windows 10/8.1/7 SP1/Server 2012 R2/Server 2008 R2 SP1 | LabVIEW Real-Time | | GPIB-ENET/1000 | Yes | No | | GPIB-USB-HS | Yes | No | | GPIB-USB-HS+ | Yes | No | | NI ExpressCard-GPIB2 | Yes | No | | NI PCIe-GPIB | Yes | Yes | | NI PCIe-GPIB+ | Yes | Yes1 | | NI PCI-GPIB | Yes | Yes | | NI PCI-GPIB+ | Yes | Yes1 | | NI PCI-GPIB/LP | Yes | Yes | | NI PCI-8232 | Yes | Yes | | NI PMC-GPIB | Yes | Yes | | NI PXI controller with built-in GPIB | Yes | Yes | | NI PXI-GPIB | Yes | Yes | | NI PXI-8232 | Yes | Yes |
1Analyzer functionality is not supported. 2 This hardware is end-of-life and not recommended for new designs. Installation InstructionsInstalling NI-488.2 for LabVIEWYou can install all of your LabVIEW products—including NI-488.2—using the LabVIEW Platform media. To request additional LabVIEW Platform media, refer to the NI website. Note - If Windows Update is enabled, the installation process might hang if Windows Update interferes with the installation of Microsoft Visual C++ 2015 Run-Time. Visit ni.com/info and enter the Info Code exjq43 for more information and steps to resolve this issue.
- If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.
Installing NI-488.2 for LabVIEW NXGNI automates LabVIEW NXG installation using NI Package Manager. Visit ni.com/info and enter the Info Code NIPMDownload to download NI Package Manager. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager. Product Security and Critical UpdatesVisit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI. Known IssuesYou can access the software and documentation known issues list online. Refer to the NI website for an up-to-date list of known issues in NI-488.2. Enhancements and Bug Fixes in Version 20.0Improved GPIB-ENET/1000 support for LabVIEW NXG 5.0. Enhancements and Bug Fixes in Version 19.5Improved GPIB-ENET/1000 support for LabVIEW NXG 4.0. Enhancements and Bug Fixes in Version 19.0Added support for 32-bit Package Manager and deprecated the previous install process. The Following Issues Were Resolved in NI-488.2 19.0730438: In some rare cases, the GPIB Hardware Enumeration Service does not start after rebooting the system, which could cause the GPIB hardware not to be usable. Enhancements and Bug Fixes in Version 18.5The Following Issues Were Resolved in NI-488.2 18.5373478: In a multicontroller application, all controllers used in the application would report EPWR error if one of the controllers lost power resulting in an EPWR error. 568289: Removing GPIB USB controllers from the system while saving configuration in MAX resulted the GPIB USB controllers not being removed in MAX. Enhancements and Bug Fixes in Version 17.6The Following Issues Were Resolved in NI-488.2 17.6670170: A hang might occur during an I/O operation if a Service Request is stuck when Autopolling is happening. 647895: As a result of an issue introduced in a previous version of NI-488.2, ibnotify for a Service Request may cause a hang when the service request event occurs. Enhancements and Bug Fixes in Version 17.0Support for HLK signing for Windows 10. Support for Borland C dropped. Enhancements and Bug Fixes in Version 16.0The following issues were resolved in NI-488.2 16.0582112: In rare cases, connecting a GPIB-USB-HS+ interface to a system could cause the computer to crash. 569142: Installer indicates that NI I/O Trace is required for NI-488.2. Enhancements and Bug Fixes in Version 15.5The Following Issues Were Resolved in NI-488.2 15.5433395: Extra delay on ibwait and ibstop was removed for GPIB Ethernet-based hardware. 538997: An NI4882 API call in a multithreaded or multiprocess application results in an unexpected error due to unprotected API calls when opening a device handle. 542306: When an application exits while there is asynchronous IO pending on ENET interfaces, the application crashes. 557236: GPIB Analyzer crashes when exporting a large capture to a text file. Enhancements and Bug Fixes in Version 15.0.1The following issues were resolved in NI-488.2 15.0.1547340: GPIB ports may not be reported in NI MAX, Web Configuration, and System Configuration API with NI-488.2 15.0.0. Enhancements and Bug Fixes in Version 15.0Updated Experience in NI-MAXThe configuration experience in Measurement & Automation Explorer (MAX) has been updated to improve consistency with other NI products. Significant changes include: - GPIB properties have been moved to the Settings page for GPIB interfaces.
- It is no longer necessary to run MAX as Administrator to change GPIB settings.
- Reset and Self-Test features are now available for all GPIB interfaces from within MAX.
- NI-488.2 DOS Support is no longer configurable through MAX; DOS Support is enabled by default on all compatible systems. Refer to the NI-488.2 documentation for instructions to manually disable NI-488.2 DOS Support.
- Scan for Instruments no longer displays instruments at the bottom of the properties page, which has been removed. Discovered instruments only appear in the Devices & Interfaces tree beneath the GPIB interface.
- GPIB-ENET/100 and GPIB-ENET/1000 interfaces now display additional information such as IP address and serial number.
- Performance of MAX has been improved during startup and when expanding Devices & Interfaces tree.
- GPIB-ENET/100 and GPIB-ENET/1000 interfaces which cannot be reached are marked as unavailable; some operations are disabled while they are offline. (386556)
- Windows display language can now be changed without adverse affecting GPIB labels as they appear in MAX. (428596)
- MAX now displays network info for GPIB-ENET/1000 interface that is configured with .local address. (409559)
Web ConfigurationGPIB interfaces are now fully configurable through the NI Web Configuration interface. Self-Test has also been added.
Removed Troubleshooting UtilityThe NI-488.2 Troubleshooting Utility has been removed. GPIB interfaces may be tested using the Self-Test feature in Measurement & Automation Explorer, or programmatically through the System Configuration API.
Improved Behavior When USB Transaction Errors Occur506688: The NI-488.2 driver is unable to recover from certain types of USB errors. These errors may occur on some systems when other USB devices are added or removed from the system while a GPIB operation is in progress. In prior versions of NI-488.2, this could lead to a hang in the process using a USB-to-GPIB interface. It could also result in a hang or blue screen error on system shutdown. This scenario now results in an EDVR error when an unrecoverable USB error occurs. To restore operation, the USB connection to the GPIB interface should be removed and reinserted, and the GPIB handle should be closed and re-opened.
The Following Issues Were Resolved in NI-488.2 15.0518983: As a result of an issue introduced in NI-488.2 14.0, GPIB-USB-B or GPIB-USB-HS I/O bus communication can hang until the handle to the GPIB interface is closed when all of the following conditions are true: - The affected interface is not CIC (Controller in Charge)
- A read or write is in progress
- An ibwait including the DCAS bit is in progress
- A device clear is received during the I/O transfer
507376: Installer hang might occur during installation of NI software on systems with NI-488.2 14.0 already installed. 478063: GPIB-USB-HS+ might become unresponsive upon rebooting in a virtual machine. 121091: Calling ibonl when a board level ibwait is in progress could result in application crash. 121181: A deadlock might occur when attempting to use a board handle with pending ibonl call on another thread. 476357: GPIB Ethernet Wizard can incorrectly add GPIB-ENET/1000 with hostname even if it is not reachable. 476487: GPIB Ethernet Wizard icon does not appear on Windows task bar. Enhancements and Bug Fixes in Version 14.0New Hardware SupportThis release adds support for the GPIB-USB-HS+ GPIB controller and Analyzer. Along with this, the NI GPIB Analyzer utility has undergone changes to allow it to work with the new analyzer hardware. The NI GPIB Analyzer utility allows simultaneous use of multiple GPIB-USB-HS+ analyzers, along with up to one non-USB GPIB analyzer. Windows Server SupportThis release adds support for Windows Server 2012 R2. Refer to the Supported Hardware section for the list of supported hardware. API Integer Type ChangesThe integer types used in the NI4882 API (ni4882.h) have been updated. All uses of unsigned long have been replaced with unsigned int. These types are functionally identical with all supported compilers, and this change improves the portability of 64-bit GPIB applications to other platforms. Users of ibnotify will need to update the function prototypes for callback functions. In most other cases applications will compile cleanly. This change is fully binary-compatible with applications built against previous versions of NI-488.2 and does not impact users of the GPIB-32 API (ni488.h). Runtime InstallerNI-488.2 for Windows is now available in a smaller Runtime form. The NI-488.2 Runtime is a minimal installation which does not include many of the utilities and supporting software included with the full NI-488.2 distribution. When building installers from LabVIEW or other NI development environments, you will now have the option of including this smaller subset of NI-488.2 in your distribution. The Following Issues Were Resolved in NI-488.2 14.0319093: Attempting to bring a non-existent device online after setting the IbcSendLLO board configuration option causes an ENOL error instead of EBUS. This problem impacted all USB based GPIB interfaces. This has been fixed. 122997: The EOIP status bit could remain set incorrectly if an ibwrta or ibrda call returned an EDVR error. 171688: An ibnotify callback could fail to be triggered by END if the notify condition included END but not CMPL. 205182: Asynchronous transfers could sometimes report EABO even though the transfer completed successfully. 372832: A callback from ibnotify might not be invoked after an asynchronous transfer was completed if the notify mask only contained END. 374822: Calling ibonl while ibnotify is pending could cause the process to crash under some circumstances. 380705: Aborting an ibrda very quickly after starting it could allow a PCI-based GPIB interface to receive data when addressed as a listener, without a read in progress. This data was lost, and could not be recovered. 404267: In some situations, the GPIB-ENET/1000 could hang while performing asynchronous transfers. This included fixes in both the NI-488.2 driver and the GPIB-ENET/1000 firmware. Users of the GPIB-ENET/1000 should update the GPIB-ENET/1000 firmware to version 1.1.0 to receive the full benefit of this fix. 405414: In some cases the DCAS bit was not correctly cleared after being reported, causing it to be reported with subsequent calls. 418661: In some situations, when an ibnotify callback function was triggered due to the completion of an asynchronous transfer, the ibcnt and ibcntl variables would be incorrect. 425931: Calling ibstop with an asynchronous operation in progress would sometimes not report an EABO error as expected. 464114: When using a GPIB-USB-B controller, the call immediately following an ibstop call could be incorrectly aborted. 463966: Severe performance degradation when performing large writes to GPIB-USB-HS hardware through USB 3.0 ports on Windows 7. 332479: On GPIB-USB-B and GPIB-USB-HS controllers, the first I/O operation after device insertion could be terminated prematurely. 240000: On GPIB-USB-B and GPIB-USB-HS controllers, ibwait and ibnotify could fail to detect the CIC, LACS, and TACS bits. 191044: The GPIB Analyzer did not automatically append the correct file extension when saving a capture. 87073: The GPIB Analyzer did not prompt to save if the application is closed while capturing data. Accessing the HelpRefer to the NI-488.2 Help, accessible by selecting National Instruments»NI-488.2»GPIB Help from the Windows menu bar. LabVIEW NXG Support and ConsiderationsThe following sections detail considerations for using LabVIEW NXG with NI-488.2. LabVIEW NXG Operating Systems and System RequirementsSoftware support for LabVIEW NXG differs in the following ways: - System requirements—Only 64-bit (x64) processors are supported.
- Operating system—Only 64-bit operating systems are supported. Refer to the Supported Operating Systems section for more information.
LabVIEW NXG Hardware SupportSupport differs for the following devices in LabVIEW NXG: - GPIB-ENET/1000 must be manually added to your system.
- To discover the GPIB-ENET/1000 on the local subnet, use LabVIEW NXG's Add Hardware to discover and then add it to your system.
- To add the GPIB-ENET/1000 using its IP Address or Hostname, use LabVIEW NXG's Add hardware by address.
LabVIEW NXG HelpView context help in LabVIEW by pressing and hovering over an object. Search for items using the search bar in the upper right corner of the LabVIEW window. You can also view context help for the search results. Additional documentation is available online at ni.com/manuals. LabVIEW NXG ExamplesLaunch LabVIEW and click the Learning tab. LabVIEW lessons are located in the Lessons tab, and LabVIEW Examples are located in the Examples tab. Follow the instructions in the lessons and examples. Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software. For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual. Using NI Software with Microsoft Windows 10Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10. Using NI Software with Microsoft Windows 8.1When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8. NI-488.2 Will Drop Support for Windows 7 (32- and 64-Bit), Windows Server 2008 R2, and All 32-Bit Windows Operating Systems in 2021NI-488.2 will drop support for Windows 7 (32- and 64-bit), Windows Server 2008 R2, and all 32-bit Windows operating systems starting in 2021. Versions of this product that ship after May 1, 2021, will not install or run on these operating systems. For detailed information about NI operating system support, visit ni.com/r/win32bitsupport.
Legal InformationCopyright © 1995–2020 National Instruments. All rights reserved. Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation. NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction. End-User License Agreements and Third-Party Legal Notices You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation: - Notices are located in the \_Legal Information and directories.
- EULAs are located in the \Shared\MDF\Legal\license directory.
- Review \_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies. IVI Foundation Copyright Notice Content from the IVI specifications reproduced with permission from the IVI Foundation. The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Trademarks Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. Patents For patents covering the NI products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
375742J-01
NI-488.2 20.0自述文件（用于Windows）2020年4月 本文件包含NI-488.2的重要信息，包括安装说明、新增功能，以及部分已修复问题的列表。 如果要使用LabVIEW NXG，请参阅LabVIEW NXG支持和注意事项。
操作系统支持 应用软件支持 硬件支持 安装说明 产品安全及关键更新 已知问题 改进和问题修正 - 20.0版
- 19.5版
- 19.0版
- 18.5版
- 17.6版
- 17.0版
- 16.0版
- 15.5版
- 15.0版
- 14.0版
使用帮助文件 LabVIEW NXG支持和注意事项 自动安装NI产品 在Microsoft Windows 10中使用NI软件 在Microsoft Windows 8.1中使用NI软件 NI-488.2将于2021年停止支持Windows 7（32位和64位）、Windows Server 2008 R2及所有32位Windows操作系统 法律信息
操作系统支持NI-488.2支持下列操作系统： - Windows 10/8.11/7 SP12
- Windows Server 2016
- Windows Server 2012 R21
- Windows Server 2008 R2 SP12
- NI Linux® Real-Time
- NI Real-Time Phar Lap ETS
1 NI软件将一并安装VC2015运行引擎和.NET 4.6.2。Windows 8.1和Windows Server 2012 R2需要Microsoft更新才能支持这些项。关于安装这些更新的详细信息，请参考Microsoft KB2919442和KB2919355。 2 NI软件使用SHA-256证书签名。Windows 7 SP1、Windows Embedded Standard 7 SP1和Windows Server 2008 R2 SP1需要Microsoft更新才能支持SHA-256。关于安装该安全更新的详细信息，请参考Microsoft KB3033929。 注：关于未来操作系统支持的详细信息，见NI-488.2将于2021年停止支持Windows 7（32位和64位）、Windows Server 2008 R2和所有32位Windows操作系统。 Windows 8相关的已知兼容性问题NI-488.2与Windows 8操作系统中的快速启动功能有兼容性问题。启动快速启动功能会导致GPIB硬件和NI-488.2驱动程序工作不正常。为防止安装或删除硬件出现问题，NI建议禁用“快速启动”功能。默认情况下，NI-488.2（用于Windows），15.5版安装程序将禁用快速启动。更多详细信息，请访问ni.com/info，输入信息代码Win8FastStartupzhs查询。 Windows升级相关的已知驱动程序问题在已安装NI-488.2的系统上进行Windows升级会导致DOS支持无法使用。要解决该问题，运行安装修复程序。如驱动程序无法找到GPIB硬件，请再次运行安装修复程序。 Win16和DOS支持Windows 32位操作系统上支持Win16和DOS。 注：2016年起，NI-488.2不再支持Windows Vista、Windows XP、Windows Server 2003以及Windows 7（无service pack）。NI-488.2 20.0无法在不支持的操作系统上安装或运行。如应用程序使用了NI-488.2 20.0，也将无法部署或发布至不支持的操作系统。此外，在当前计算机上安装NI-488.2 20.0后，使用任何版本的LabVIEW、LabWindows™/CVI™、NI TestStand™或Measurement Studio生成的安装程序，都无法在不支持的操作系统上运行。 请访问ni.com/r/OSSupport2016，了解2016年起操作系统支持更改的详细信息。 注 可能需要禁用物理地址扩展(PAE)方可支持Windows 32位操作系统。关于该问题对操作系统的影响以及需采取的措施，请访问ni.com/info，输入信息代码PAESupport查询。 应用软件支持NI-488.2 20.0支持下列应用程序软件版本（包含service pack）。如使用的不是NI应用软件，请参考Microsoft Visual Studio Support。 | 应用程序软件 | NI-488.2支持的版本 | | NI-VISA | 20.01 | | LabVIEW | 2017、2018、2019、2020 | | LabVIEW Real-Time模块 | 2017、2018、2019、2020 | | LabVIEW NXG | 5.0 | | LabWindows™/CVI™ | 2012、2013、2015、2017 | | Measurement Studio | 2012、2013、2015 | | 1 系统中如装有NI-VISA 5.1之前的版本，可能会引起NI-488.2的可用性问题。在使用NI-488.2设备之前，请将NI-VISA升级至5.1或更高版本。 |
注：NI I/O Trace 17.0及更高版本支持NI-488.2 17.0。以前的NI I/O Trace版本不支持NI-488.2 17.0或更高版本。 Microsoft Visual Studio支持如使用NI-488.2 .NET类库，至少需要.NET Framework 4.0。在面向.Net Framework 4.0或.NET Framework 4.5的Visual Studio版本中，NI-488.2 .NET类库可与Visual C#或Visual Basic .NET配合使用。 如要使用.NET API，除安装NI设备驱动程序外，还必须安装.NET类库或.NET包装器。关于.NET Framework和驱动程序支持的版本信息，及安装文件的下载地址，请访问National Instruments .NET Support。 Microsoft Visual Basic 6.0支持NI-488.2支持32位的Visual Basic 6.0应用程序开发。详细信息见NI-488.2帮助中特定语言的编程说明主题。 非托管的C/C++支持NI-488.2支持使用Microsoft Visual C++ 2005及其后续版本的32位和64位GPIB应用程序。Microsoft Visual C/C++ 6.0和Microsoft Visual Studio .NET 2003仅支持32位GPIB应用程序。详细信息见NI-488.2帮助中特定语言的编程说明主题。 硬件支持下表列出了NI-488.2支持的硬件型号： | GPIB硬件 | Windows 10/8.1/7 SP1/Server 2012 R2/Server 2008 R2 SP1 | LabVIEW Real-Time | | GPIB-ENET/1000 | 是 | 否 | | GPIB-USB-HS | 是 | 否 | | GPIB-USB-HS+ | 是 | 否 | | NI ExpressCard-GPIB2 | 是 | 否 | | NI PCIe-GPIB | 是 | 是 | | NI PCIe-GPIB+ | 是 | 是1 | | NI PCI-GPIB | 是 | 是 | | NI PCI-GPIB+ | 是 | 是1 | | NI PCI-GPIB/LP | 是 | 是 | | NI PCI-8232 | 是 | 是 | | NI PMC-GPIB | 是 | 是 | | 内置GPIB的NI PXI控制器 | 是 | 是 | | NI PXI-GPIB | 是 | 是 | | NI PXI-8232 | 是 | 是 |
1 不支持分析器功能。 2 该硬件生命周期已结束，不推荐新设计使用。 安装说明在LabVIEW上安装NI-488.2可使用LabVIEW开发平台安装盘安装所有LabVIEW产品，包括NI-488.2。 如需获取额外的LabVIEW开发平台安装包，请访问NI网站。 注： - 如启用Windows更新，安装过程可能会由于Windows更新和安装Microsoft Visual C++ 2015运行引擎的冲突而挂起。关于解决该问题的详细步骤，请访问ni.com/info并输入信息代码exjq43。
- 如已通过NI软件套件或NI产品包购买产品，请使用随附的安装光盘安装产品。
在LabVIEW NXG上安装NI-488.2LabVIEW NXG的安装过程可通过NI Package Manager实现自动化。请访问ni.com/info并输入信息代码NIPMDownload，下载NI Package Manager。关于使用NI Package Manager安装、移除、更新NI软件的详细信息，请参考NI Package Manager手册。 产品安全及关键更新访问ni.com/security查看和订阅NI产品的安全通知。访问ni.com/critical-updates了解NI关键更新的详细信息。 已知问题您可通过网络查看软件和文档的已知问题列表。关于NI-488.2已知问题的最新列表，请访问NI网站。 20.0版的改进和问题修正改进了LabVIEW NXG 5.0的GPIB-ENET/1000支持 19.5版的改进和问题修正改进了LabVIEW NXG 4.0的GPIB-ENET/1000支持 19.0版的改进和问题修正添加了对32位Package Manager的支持，并停用了以前的安装过程。 NI-488.2 19.0解决了下列问题730438: 在极少数情况下，GPIB Hardware Enumeration Service在重启系统后无法启动，从而可能导致GPIB硬件无法使用。 18.5版的改进和问题修正NI-488.2 18.5解决了下列问题373478: 在多控制器应用程序中，如果其中一个控制器断电并导致EPWR错误，则应用程序中所有控制器均会报告EPWR错误。 568289: 在MAX中保存设置时，从系统中移除GPIB USB控制器将导致无法从MAX中移除GPIB USB控制器。 17.6版的改进和问题修正NI-488.2 17.6解决了下列问题670170: 如果自动轮询时，服务请求卡住，则I/O操作时可能出现挂起。 647895: 由于NI-488.2早期版本引入的问题，发生服务请求事件时，用于服务请求的ibnotify可能导致挂起。 17.0版的改进和问题修正用于Windows 10的HLK签名支持。 不再支持Borland C。 16.0版的改进和问题修正NI-488.2 16.0解决了下列问题582112: 在极少数情况下，连接GPIB-USB-HS+接口至系统造成计算机系统崩溃。 569142: 安装程序提示NI-488.2需要NI I/O Trace。 15.5版的改进和问题修正NI-488.2 15.5解决了下列问题433395：GPIB以太网硬件上ibwait、ibstop命令的不再有较长的时间延迟。 538997：在多线程或多进程应用程序中的NI4882 API调用会产生非预期错误，原因是这种调用是对开放设备句柄的不受保护的API调用。 542306：如ENET接口上有非同步I/O，应用程序退出时会发生崩溃。 557236：导出大量采集数据至文本文件时，GPIB分析仪会发生崩溃。 15.0.1版的改进和问题修正NI-488.2 15.0.1解决了下列问题547340：安装NI-488.2 15.0.0后，GPIB端口在NI MAX、Web Configuration、系统配置API中可能无法显示。 15.0版的改进和问题修正改进了在NI-MAX中的用户体验。MAX中的配置体验进行了升级，增强了与其他NI产品的一致性。较大的改动包括： - GPIB属性移至GPIB接口的设置页。
- 修改GPIB设置不再需要以管理员身份运行MAX。
- 在MAX中，GPIB接口设备可使用重置和自检功能。
- MAX中不再可配置NI-488.2 DOS支持。在所有兼容的系统上，DOS支持默认为启用。关于手动禁用NI-488.2 DOS支持的步骤，请参考NI-488.2说明文档。
- 扫描到的仪器不再显示于属性页的底部，属性页已移除。检测到的仪器仅在GPIB接口的设备和接口属性目录下显示。
- GPIB-ENET/100和GPIB-ENET/1000接口现可显示IP地址、序列号等更多信息。
- 启动、展开设备和接口树形目录时，MAX的速度有所加快。
- 无法连接的GPIB-ENET/100和GPIB-ENET/1000设备显示为不可用，离线时设备的某些操作被禁用。(386556)
- Windows显示语言改动不会反向影响到MAX中GPIB设备的标签。(428596)
- MAX现在可以显示用本地地址配置的GPIB-ENET/1000接口的网络信息。(409559)
Web配置现在可通过NI Web配置接口对GPIB接口进行完全配置。新增了自检功能。
移除故障检查工具NI-488.2故障解答工具已被移除。可使用Measurement & Automation Explorer中的“自检”功能对GPIB接口进行测试，或以编程方式通过系统配置API进行测试。
改进USB发生传输错误时的行为506688：NI-488.2驱动器无法从特定类型的USB错误中恢复。在某些系统上，当GPIB操作正在运行时向系统添加或移除其他USB设备可能会造成此类错误。在NI-488.2早期版本中，这会导致使用USB至GPIB接口的进程挂起。这也会在系统关闭时导致挂起或蓝屏错误。现在，当发生不可恢复的USB错误时，上述情形会造成EDVR错误。要恢复操作，应删除USB至GPIB接口之间的连接并重新插入，且应关闭GPIB句柄并重新打开。
NI-488.2 15.0解决了下列问题518983：由于NI-488.2 14.0所造成的问题，GPIB-USB-B或GPIB-USB-HS I/O总线通信可能会挂起，直至满足下列全部条件时关闭GPIB接口句柄： - 受影响的接口不是CIC（管理控制器）
- 正在进行读取或写入
- 包含DCAS位的ibwait正在运行
- 在I/O传输过程中收到“设备清零”
507376：在已经安装NI-488.2 14.0的系统上安装NI软件时，安装程序可能挂起。 478063：在虚拟机上进行重启时，GPIB-USB-HS+可能进入无响应状态。 121091：当板卡级ibwait正在运行时，调用ibonl可能导致应用程序崩溃。 121181：当板卡句柄在其他线程上有未完成的ibonl调用时，尝试使用该板卡句柄可能导致锁死。 476357：GPIB以太网向导可能会错误添加带有主机名的GPIB-ENET/1000，即使其无法访问。 476487：Windows任务栏中不显示GPIB以太网向导图标。 14.0版的改进和问题修正新硬件支持此版本增加了对GPIB-USB-HS+ GPIB controller和Analyzer的支持。另外，NI GPIB Analyzer也进行了改进，可用于新的分析器。NI GPIB分析仪实用程序允许同时使用多个GPIB-USB-HS+分析仪，以及一个非USB接口的GPIB分析仪。 Windows Server支持此次发布新增了对Windows Server 2012 R2的支持。请访问支持的硬件查看支持的硬件列表。 API整数类型改动NI4882 API (ni4882.h)的整数类型已更新。所有使用unsigned long的位置，均被替换为unsigned int。该数据类型与支持的编译器功能上完全一致，提高了64位GPIB应用程序在其他平台上的适用性。ibnotify的用户将需要更新回调函数的函数原型。在大多数其他情况下，应用程序重新编译即可。使用较早版本NI-488.2生成的应用程序不受影响。该改动也不会影响GPIB-32 API (ni488.h)的用户。 运行引擎安装程序用于Windows的NI-488.2现可通过较小的运行引擎模式安装。NI-488.2运行引擎的安装文件较少，不包括NI-488.2完整发布中包含的工具和支持软件。当从LabVIEW或其他NI开发环境构建安装程序时，可选择在软件发布中包含较少数量的NI-488.2文件。 NI-488.2 14.0解决了下列问题319093：设置IbcSendLLO板卡配置选项后尝试连接不存在的设备时，提示ENOL（而非EBUS）错误。此问题影响所有基于USB的GPIB接口。该问题已解决。 122997：如ibwrta或ibrda调用返回EDVR错误，EOIP状态位可能保持错误设置状态。 171688：如通知条件包含END但不包含CMPL，则ibnotify回调可能无法触发。 205182：即使传输成功完成，异步传输也可能会报告EABO。 372832：如通知掩码仅包含END，则异步传输完成后ibnotify回调可能无法调用。 374822：某些情况下，ibnotify等待时调用ibonl可能引起进程崩溃。 380705：启动ibrda后迅速将其中止可允许基于PCI的GPIB接口编址为侦听器时接收数据，无需进程中的读取操作。数据丢失，无法恢复。 404267：在某些情况下，GPIB-ENET/1000可能在执行异步传输时崩溃。NI-488.2的驱动程序和GPIB-ENET/1000固件都进行了相应改进。GPIB-ENET/1000用户应将固件更新至1.1.0版，以修复该问题。 405414：在某些情况下，报告后，DCAS位未正确清除，导致其后的调用继续报告该位。 418661：某些情况下，ibnotify回调函数因异步传输完成触发时，ibcnt和ibcntl变量可能不正确。 425931：异步操作过程中调用ibstop有时可能不会报告预期的EABO错误。 464114：使用GPIB-USB-B控制器时，紧接ibstop的调用可能会被错误中止。 463966：在Windows 7中通过USB 3.0端口向GPIB-USB-HS硬件执行大量写入时会引起性能严重下降。 332479：在GPIB-USB-B和GPIB-USB-HS控制器上，设备插入后的首次I/O操作可能会提前终止。 240000：在GPIB-USB-B和GPIB-USB-HS控制器上，ibwait和ibnotify可能无法检测CIC、LACS和TACS位。 191044：保存捕获时GPIB Analyzer未自动附加正确的文件扩展名。 87073：如应用程序在捕获数据时关闭，GPIB Analyzer没有提示保存。 使用帮助文件从Windows菜单栏选择National Instruments»NI-488.2»GPIB Help，可打开NI-488.2帮助。 LabVIEW NXG支持和注意事项下面列出了NI-488.2与LabVIEW NXG一起使用时的注意事项。 LabVIEW NXG的操作系统和系统需求LabVIEW NXG的软件支持在下列方面有所不同： - 系统要求－仅支持64位(x64)处理器。
- 操作系统－仅支持64位操作系统。详细信息请参考操作系统支持。
LabVIEW NXG硬件支持LabVIEW NXG硬件支持在下列设备上有所不同： - 必须手动添加GPIB-ENET/1000至系统。
- 如要发现本地子网上的GPIB-ENET/1000，请使用LabVIEW NXG的“添加硬件”功能识别和添加设备。
- 要通过IP地址或主机名添加GPIB-ENET/1000，请使用LabVIEW NXG的按地址添加硬件功能。
LabVIEW NXG帮助在LabVIEW中按下并将光标移至对象上悬停可查看即时帮助。 在LabVIEW窗口右上角的搜索栏中可进行关键词搜索。可查看搜索结果的即时帮助。 其他NI文档，请访问ni.com/manuals。 LabVIEW NXG范例打开LabVIEW NXG，单击学习选项卡。 LabVIEW NXG课程在课程选项卡上，LabVIEW NXG范例在范例选项卡上。按照课程和范例中的步骤使用课程和范例。 自动安装NI产品可使用命令行参数来自动安装大多数NI产品，以减少安装程序用户界面和对话框交互。 如待安装的NI产品依赖于Microsoft .NET 4.6.2，则安装NI软件之前，.NET安装程序会首先启动并在完成后提示重启。为了避免重启计算机，建议在安装NI软件之前单独安装.NET 4.6.2。 关于自动安装NI产品的详细信息，见NI Package Manager手册中的自动化安装程序主题。 在Microsoft Windows 10中使用NI软件Microsoft Windows 10是最新版本的Windows操作系统，与早期版本相比有重大改进。Windows 10引入了多种全新功能，并融合了Windows 7和Windows 8的特色。关于NI支持Windows 10的详细信息，请访问ni.com/windows10。 在Microsoft Windows 8.1中使用NI软件在Microsoft Windows 8.1上安装NI软件时，应用视图上会增加一些磁贴，作为指向NI LabVIEW、Measurement & Automation Explorer (NI MAX)和NI启动器等NI应用程序的快捷方式。关于NI支持Windows 8.1的详细信息，请访问ni.com/windows8。 NI-488.2将于2021年停止支持Windows 7（32位和64位）、Windows Server 2008 R2及所有32位Windows操作系统NI-488.2将于2021年起停止支持Windows 7（32位和64位）、Windows Server 2008 R2和所有32位Windows操作系统。本产品在2021年5月1日以后发行的版本将无法在这些操作系统上安装和运行。关于NI操作系统支持的详细信息，请访问ni.com/r/win32bitsupport。
法律信息版权 © 1995-2020 National Instruments. 版权所有 根据版权法，未经National Instruments公司事先书面同意，本发行物不得以任何形式（包括电子或机械形式）进行全部或部分复制或传播，包括影印、录制、储存于任何信息检索系统中，以及翻译。 National Instruments公司尊重他方的知识产权，也恳请用户能给予我们同样的尊重。NI软件受版权法及其他知识产权法的保护。在将NI软件用于复制为他方所有的软件或其他资料的任何场合，NI软件仅可用于在符合许可证或其他法律限制的情况下复制上述资料。 最终用户许可协议和第三方法律声明 安装结束后，可在下列位置找到最终用户许可协议(EULA)和第三方法律声明： - 法律声明位于\_Legal Information和目录下。
- EULA位于\Shared\MDF\Legal\license目录下。
- 如需使NI产品生成的安装程序中包含法律相关信息，请查阅\_Legal Information.txt。
美国政府的有限权利 如果客户隶属于美国政府的一个机构、部门、或其他单位，则本手册所涵盖的技术信息的使用、拷贝、复制、发布、修改、披露或传递应当受到适用于民间机构的联邦采购条例52.227-14和适用于军用机构的联邦国防采购条例补充规定252.227-7014和252.227-7015中有限权利条款的约束。 IVI Foundation版权声明 Content from the IVI specifications reproduced with permission from the IVI Foundation. The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. 商标 关于NI商标信息，请访问ni.com/trademarks的NI Trademarks and Logo Guidelines页面。此处提及的其他产品和公司名称均为其各自公司的商标或商业名称。 专利权 关于NI产品和技术的专利权，请查看软件中的帮助»专利信息、光盘中的patents.txt文件或ni.com/patents上的National Instruments Patent Notice。 375742J-0118 | 
发表于 2020-5-26 22:40:12
