NI-Motion 8.2 Full Win32Eng NI运动驱动程序8.2完整版适用LabVIEW8.5~LabVIEW2010

石鑫华视觉 · 发表于 2020-6-24 10:58:17

注册登陆后可查看附件和大图，以及购买相关内容

您需要登录才可以下载或查看，没有账号？注册会员

x

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI-Motion 8.2 Full Win32Eng NI运动驱动程序8.2完整版适用LabVIEW8.5~LabVIEW2010

NI-Motion为NI运动器件的驱动程序，开发软件为NI SoftMotion，及Motion Assistant。

NI-Motion 8.2
发布日期
10-8-2
受支持的操作系统
Windows XP 32-bit
Windows 7
Windows 7 64-bit
Windows 7 32-bit
Windows Server 2003 R2 32-bit
Windows Server 2008 R2 64-bit
Windows Vista
Windows Vista 64-bit
Windows Vista 32-bit
Windows XP
语言
英文
校验和
(MD5)
0175afa41ec8c29e4cdeff5572073d6e

百度网盘下载（限速，请开会员或使用破解限速工具）：
链接: 请注册视觉论坛用户，登录后购买附件下载查看提取码: 请注册登录视觉论坛会员，购买附件查看

NI官方下载地址（可能无效或无法下载完成）：
请注册登录视觉论坛会员，购买附件查看

Motion8.2.txt (273 Bytes, 下载次数: 0, 售价: 10 元)

NI-Motion™ 8.2 Readme

This document contains installation and programming considerations for using NI-Motion with NI 73xx motion controllers, a list of changes in this version of NI-Motion, and information about NI-Motion known issues.

Contents

General Information

Installation and Configuration Instructions

NI-Motion 8.2 Changes and Enhancements

NI-Motion 8.2 General Considerations

NI-Motion 8.2 Known Issues

Previous NI-Motion Changes and Enhancements

General Information

NI-Motion 8.2 is the motion control software you use to communicate with all National Instruments NI 73xx motion controllers using LabVIEW, C, LabWindows™/CVI™, or Microsoft Visual Basic 6.0 development platforms. Refer to KnowledgeBase article 39DA8HMU, Does the NI-Motion Driver Support Visual Studio .NET?, at ni.com/kb for information about Visual Studio .NET 2003 and Visual Studio 2005 or later support.

NI-Motion 8.2 is compatible with the following National Instruments software:

LabVIEW 8.5 or later.
LabVIEW 8.5 or later Real-Time Module.
LabWindows/CVI 7.0 or later.
NI Motion Assistant 2.3 or later graphical prototyping software.

Compatibility with Earlier Versions of NI-Motion

If you have developed motion control systems using a previous version of NI-Motion, you must recompile your code before it will work correctly with NI-Motion 8.2.

In addition, any applications you build in NI-Motion 8.2 will not work correctly in earlier versions of NI-Motion. Similarly, configuration settings you build and save in Measurement & Automation Explorer (MAX) with NI-Motion 8.2 will not work with applications you build in earlier versions of NI-Motion.

LabVIEW Real-Time Users

To use NI-Motion 8.2 with a real-time target, you must update the NI-Motion driver software on the real-time target system using MAX. Driver versions on the host and target system must be the same for proper operation. Refer to the Measurement & Automation Explorer Remote Systems Help by selecting Help»Help Topics»Remote Systems in MAX for information about installing software on the remote system.

Back to Top

Installation and Configuration Instructions

The following sections include important information about installing NI-Motion 8.2, instructions for downloading and installing NI-Motion 8.2 from the Web or from the CD, and information about NI-Motion firmware.

You can run the NI-Motion 8.2 installer on the following operating systems:

Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP (32-bit)
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)

NI-Motion runs as a 32-bit application on all operating systems.

Note Support for Windows Server 2003 R2 may require disabling physical address extensions (PAE). To learn how this might affect your use of Windows Server 2003 and what actions you might have to take, visit ni.com/info and enter the info code PAESupport.

NI-Motion does not support Windows 2000/NT/Me/98/95, Windows XP x64, or the Windows Server non-R2 editions.If you are any of these operating systems, do not install NI-Motion 8.2.

Tip For optimal performance, update your operating system to the latest service pack and apply all security patches.

Downloading NI-Motion 8.2 from the Web

Complete the following steps to install this update:

Download the NIMotion820.exe file, and then run it.
Follow the onscreen instructions.

Note (Windows 7 and Vista) Users may see access and security messages during installation. Accept the prompts to complete the installation.
When the installer completes, a dialog box appears that asks if you want to restart, shut down, or restart later. Select Restart.
Download the updated firmware to your controller(s):

Note You must update the firmware on your NI 73xx controllers before you can use them with NI-Motion 8.2.
- Launch MAX.
- Expand Devices and Interfaces.
- Select the appropriate motion controller.
- Click the Firmware tab.
- Click the Update Firmware button at the top of the window to update all the firmware files on your device.

Installing from the CD

Complete the following steps to install this update:

Insert the NI-Motion 8.2 installation CD in the CD-ROM drive.
If you have autorun enabled, autorun.exe runs automatically. Otherwise, double-click autorun.exe.
Follow the onscreen instructions.

Note (Windows Vista) Users may see access and security messages during installation. Accept the prompts to complete the installation.
When the installer completes, a dialog box appears that asks if you want to restart, shut down, or restart later. Select Restart.
Download the updated firmware to your controller(s):

Note You must update the firmware on your NI 73xx controllers before you can use them with NI-Motion 8.2.
- Launch MAX.
- Expand Devices and Interfaces.
- Select the appropriate motion controller.
- Click the Firmware tab.
- Click the Update Firmware button at the top of the window to update all the firmware files on your device.

Changing Firmware Files to an Earlier Version of NI-Motion

For optimal performance, ensure that the firmware on your controller matches the driver version you install. Complete the following steps to replace the firmware on your controller if you need to use an earlier version of the NI-Motion software and firmware:

Launch MAX.
Expand Devices and Interfaces.
Select the appropriate motion controller.
Click the Firmware tab.
Right-click one of the firmware files in the Firmware Name column and select Download All Files to download the firmware files on the computer onto the controller.

Back to Top

NI-Motion 8.2 Changes and EnhancementsLabVIEW 2010 Support

NI-Motion 8.2 is fully supported on LabVIEW 2010.

Back to Top

NI-Motion 8.2 General ConsiderationsInhibit Output Behavior

The default behavior of the inhibit output changed after NI-Motion 7.0. Previously, the inhibit output would be driven to the active state when the output was disabled. NI-Motion 7.0 and higher drives the inhibit output to the inactive state when the output is disabled. The behavior of the inhibit output when it is enabled did not change.

Importing Portable Configuration Files

Importing motion controller settings from older portable configuration files may take a few minutes due to the settings upgrade process. This is expected behavior.

Creating C Projects with Microsoft Visual Studio .NET 2003 and Visual Studio 2005 or later

Visual Studio .NET 2003 and Visual Studio 2005 and later do not allow C++ precompiled header files to be used with C source files. Disable precompiled headers when running NI-Motion C examples.

Firmware Versions in NI-Motion 8.2

The following table lists the expected firmware files that ship with NI-Motion 8.2.

Firmware Sector	Version Number
Firmware Sector	NI 7330	NI 7340	NI 7350	NI PCI-7390
68331	7.40.3003	7.40.3003	7.40.3003	7.40.3003
DSP	7.32.3003	7.32.3003	7.32.3003	7.32.3003
FPGA1	7.00.3001	7.00.3001	7.10.3001	7.00.3014
FPGA2	7.00.3001	7.00.3001	—	—

Upgrading from NI-Motion 5.0.1

When you upgrade NI-Motion 5.0.1 to NI-Motion 8.2, your controller does not use the initialization settings you configured and saved in MAX prior to installing NI-Motion 8.2. To use your old initialization settings, you must change back to the old settings using the Change Current Settings feature in the Initialization Settings wizard in MAX. Refer to Measurement & Automation Explorer Help for Motion for information about changing device settings.

Tip Click Help»Help Topics»NI-Motion»NI-Motion Configuration Help to launch Measurement & Automation Explorer Help for Motion.

Back to Top

NI-Motion 8.2 Known Issues

You can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in NI-Motion 8.2.

Back to Top

Previous NI-Motion Changes and Enhancements

Refer to KnowledgeBase article 47CC30FL, NI-Motion Readmes, at ni.com/kb for access to previous NI-Motion readme files, starting with NI-Motion 7.0.

Back to Top

Important Information

Copyright

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

Trademarks

CVI, LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks. The mark LabWindows is used under a license from Microsoft Corporation. Other product and company names listed are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.