石鑫华视觉论坛微信公众号:石鑫华视觉

 找回密码
 注册会员
查看: 2428|回复: 0

[LV工具模块] LabVIEW 2012 FPGA Compile Farm Toolkit Win32Eng LabVIEW2012FPGA集群编译工具包FPGA-CFT2012

[复制链接]
  • TA的每日心情
    慵懒
    11 小时前
  • 签到天数: 3156 天

    连续签到: 26 天

    [LV.Master]2000FPS

    发表于 2020-8-2 23:32:54 | 显示全部楼层 |阅读模式 来自:广东省东莞市 联通

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有账号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

    视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

    LabVIEW 2012 FPGA Compile Farm Toolkit Win32Eng LabVIEW2012FPGA集群编译工具包FPGA-CFT2012

    LabVIEW FPGA Compile Farm工具包可帮助您创建现场服务器,轻松管理FPGA编译。
    LabVIEW FPGA Compile Farm工具包可帮助您创建现场服务器,轻松管理FPGA编译。用户可根据需要连接多台编译计算机;中央服务器软件负责管理并行编译和队列之外的集群部署(farming)。为了帮助用户缩短FPGA编译时间,该工具包还可支持Linux编译服务器计算机。


    文件大小: 215628424 字节 (205.64 MB)
    修改日期: 2013-09-09 23:30
    MD5: 437f68998b92aecda629e77a101cddbc(官方正确)
    SHA1: b8307618ad2c3dc6d8797b30ef9f163c5cfba929
    SHA256: 9753d84105437f31b07bef1c371431eaf9da18a4b23d877a6049f2dd84e7d559
    CRC32: 48d5a02f

    百度网盘下载地址(限速,请开会员或使用破解限速工具):
    链接: 请注册视觉论坛用户,登录后购买附件下载查看,充值请联系在线客服 提取码: 请注册登录视觉论坛会员,购买附件查看

    NI官方下载地址(可能无效或无法下载完成):
    请注册登录视觉论坛会员,购买附件查看
    CFT2012.txt (267 Bytes, 下载次数: 0, 售价: 10 元)

    LabVIEW 2012 FPGA Compile Farm Toolkit Readme
    Version 12.0
    June 2012
    This file contains information to introduce you to the LabVIEW FPGA Compile Farm Toolkit and provides you with help resources you can use. This file contains the following information that you need to understand:
    Overview
    System Requirements
    Installation and Activation Instructions
    Getting Started
    Known Issues

    Overview
    With the FPGA Compile Farm Toolkit you can compile multiple FPGA VIs simultaneously as well as monitor and manage the compilation queue remotely. You also can install compile workers on different computers and let the FPGA compile server manage all available compile workers on the network and load balance compilation requests. The compile server can reschedule the compilation job to a different compile worker if a compile worker becomes inoperable during a compilation.
    System Requirements
    The compile farm server, which is the computer on which you install the FPGA Compile Farm Toolkit, must meet the following minimum system requirements:
    • Windows 7/Vista/XP (Service Pack 2 or 3)
    • 35 MB free disk space
    • 1 MB RAM
    • Web browser with Microsoft Silverlight
    Installation and Activation Instructions
    You can install all of your LabVIEW products—including the FPGA Compile Farm Toolkit—using the LabVIEW 2012 Platform DVDs. You can find installation instructions for the FPGA Compile Farm Toolkit along with activation instructions in the following locations:
    • LabVIEW Installation Guide, which is available on the LabVIEW installation media.
    • LabVIEW 2012 Platform DVDs Readme, which is available on the top-level of LabVIEW Platform DVD 1.
    To request additional LabVIEW 2012 Platform DVDs, refer to the National Instruments Web site at ni.com.
    Note: If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.
    Known Issues
    You can access the software and documentation known issues list online. Refer to the National Instruments Web site at ni.com for an up-to-date list of known issues in the FPGA Compile Farm Toolkit.
    Getting Started
    Refer to the Getting Started with the FPGA Compile Farm document, available by selecting Start»All Programs»National Instruments»FPGA»Getting Started with the FPGA Compile Farm, for information about setting up and using the FPGA compile farm.
    Automating the Installation of NI Products
    You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
    If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
    For more information, refer to the following KnowledgeBase articles:
    • For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
    • For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
    • To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.

    Important Information
    Copyright
    © 2012 National Instruments. All rights reserved.
    Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
    National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
    End-User License Agreements and Third-Party Legal Notices
    You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:
    • Notices are located in the \_Legal Information and directories.
    • EULAs are located in the \Shared\MDF\Legal\license directory.
    • Review \_Legal Information.txt for information on including legal information in installers built with NI products.
    Trademarks
    LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.
    Other product and company names mentioned herein are trademarks or trade names of their respective companies.
    Patents
    For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW HALCON图像处理入门教程(第二版)
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程11种全套
    《LabVIEW Vision函数实例详解》教程-NI Vision所有函数使用方法介绍,基于NI VISION2020,兼容VDM21/22/23
    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|石鑫华视觉论坛 |网站地图

    GMT+8, 2024-3-29 19:01

    Powered by Discuz! X3.4

    © 2001-2024 Discuz! Team.

    快速回复 返回顶部 返回列表