LabVIEW 2012SP1 FPGA Module Xilinx Compilation Tools and Patch Linux32Eng LV2012SP1 FPGA编译工具(ISE 13.4)及补丁

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

LabVIEW 2012SP1 FPGA Module Xilinx Compilation Tools and Patch Linux32Eng LV2012SP1 FPGA编译工具(ISE 13.4)及补丁

LabVIEW FPGA编译工具可用于本地或远程编译LabVIEW FPGA代码，并在NI FPGA硬件终端上运行。
LabVIEW FPGA编译工具是一个实用软件，其中包含的工具可帮助您在本地或远程编译LabVIEW FPGA代码，从而在Xilinx ISE或Xilinx Vivado支持的NI FPGA硬件目标上运行代码。所提供的工具与LabVIEW FPGA模块兼容。

2012SP1RHEL56，3.52GB
LV2012SP1FPGA编译工具（ISE13.4）补丁
2012sp1f1_FPGA_Compile_Worker_Patch_Linux，304KB

发布日期
13-3-4
受支持的操作系统
Red Hat Enterprise Linux 5.6 (32-bit)
Red Hat Enterprise Linux 5.6
语言
English
校验和
MD5: 20b8269fee1cd5c7690e95eb853714e0
SHA1: fab5c7a02300646675f01ba2752dd494a72e5baa
SHA256: b88a0cb18f7fbb189e3c1fcd33f0b9f8cdf2b6faadbce3bc5d4998a434ead85e
CRC32: 0743f8f9

百度网盘下载（限速，请开会员或使用工具下载）:
请注册视觉论坛会员，登录购买附件查看，充值请联系在线客服

NI官方下载地址（可能无法下载完成或地址无效）：
请注册视觉论坛会员，登录购买附件查看，充值请联系在线客服
FPGACT-Linux-ISE13.4-LV2012SP1.txt (255 Bytes, 下载次数: 1, 售价: 10 元)

2020-8-26 21:16 上传

点击文件名下载附件

Compile Worker for Linux Readme (LabVIEW FPGA Module)

Version 12.0.1

December 2012

This file contains important information about the LabVIEW FPGA Module Compile Worker for Linux.

Installation

You can install the Compile Worker for Linux using the LabVIEW FPGA Module Addtional Xilinx Compilation Tools DVD. You can find installation instructions for the Compile Worker for Linux along with activation instructions in the following locations:

• LabVIEW FPGA Module Release and Upgrade Notes, available in your FPGA Module software kit or online at ni.com/manuals.
• Activation Instructions for National Instruments Software, which are available on the LabVIEW intallation media.
  

Known Issues

You can access the software and documentation known issues list online. Refer to the National Instruments website for an up-to-date list of known issues in the FPGA Module.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information, refer to the following KnowledgeBase articles:

• For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
• For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
  

---

Copyright

© 2003–2012 National Instruments. All rights reserved.

I.     Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

II.     Third-Party Copyright Notices

The Compile_Worker_Notice.txt file contains a third-party copyright notice for third-party components used by certain FPGA Module features. The following directory is the default installation location for the file, but the location might vary depending on the configuration of the local computer:

/usr/local/natinst/nifpgacompileworker/doc/

End-User License Agreements and Third-Party Legal Notices

For end-user license agreements (EULAs) and copyright notices, conditions, and disclaimers, including information regarding certain third-party components used in LabVIEW, refer to the Copyright topic of the LabVIEW Help.

Trademarks

National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.

Xilinx® is a registered trademark of Xilinx, Inc.

Linux® is a registered trademark of Linus Torvalds in the U.S. and other countries.

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.