LabVIEW 2019 FPGA Module Xilinx Compilation Tools Linux64Eng LV2019 FPGA编译工具(Vivado 2017.2)

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

LabVIEW 2019 FPGA Module Xilinx Compilation Tools  Linux64Eng LV2019 FPGA编译工具(Vivado 2017.2)

LabVIEW FPGA编译工具可用于本地或远程编译LabVIEW FPGA代码，并在NI FPGA硬件终端上运行。
LabVIEW FPGA编译工具是一个实用软件，其中包含的工具可帮助您在本地或远程编译LabVIEW FPGA代码，从而在Xilinx ISE或Xilinx Vivado支持的NI FPGA硬件目标上运行代码。所提供的工具与LabVIEW FPGA模块兼容。

NI-LVFPGA-2019-LinuxVivado，6.99GB

发布日期
19-5-17
受支持的操作系统
Red Hat Enterprise Linux 6.7
Red Hat Enterprise Linux 7.2
Red Hat Enterprise Linux 7.3
CentOS 7.2
CentOS 7.3
语言
English
校验和
MD5: 686f4c99cfdb5f77d990359ab17db0c3
SHA1: 2d750a069ee4c0e14f09df4bbcde78408c3f7d08
SHA256: 58c8f5b32809bd3290dbd62469a322eba53ba3b6667319d143aa6698a9625b99
CRC32: 07313c05

百度网盘下载（限速，请开会员或使用工具下载）:
请注册视觉论坛会员，登录购买附件查看，充值请联系在线客服

NI官方下载地址（可能无法下载完成或地址无效）：
请注册视觉论坛会员，登录购买附件查看，充值请联系在线客服
FPGACT-Linux-Vivado2017.2-LV2019.txt (287 Bytes, 下载次数: 1, 售价: 10 元)

2020-8-26 22:48 上传

点击文件名下载附件

LabVIEW 2019 FPGA Module Xilinx Compilation Tools for Linux Readme

March 2019

This file contains important information about the LabVIEW FPGA Module Xilinx Compilation Tools for Linux, including system requirements and installation instructions.

Overview

System Requirements

Supported Hardware

Installation Instructions

Product Security and Critical Updates

Legal Information

---

Overview

The Xilinx compilation tools include tools for Vivado 2017.2 and ISE 14.7, which are supported by the LabVIEW FPGA Module. Install these compilation tools if you want to compile FPGA VIs on a Linux computer.

The Xilinx compilation tools also support Windows. Refer to the FPGA Module Xilinx Compilation Tools for Windows Readme for more information.

System Requirements

The Xilinx Compilation Tool for Vivado 2017.2 has the following system requirements:

• One of the following operating systems:
  
  • Red Hat Enterprise Linux 6.7 (64-bit)
  • Red Hat Enterprise Linux 7.2 or 7.3 (64-bit)
  • CentOS 7.2 or 7.3 (64-bit)
    
• 15 GB of additional disk space
• Memory—Refer to the Xilinx website at www.xilinx.com for memory requirements of different FPGA targets. Failure to meet the target-specific memory requirement may result in unpredictable compilation results.
  
  Note  The recommended memory size on the Xilinx website is for one compile job only. If you run multiple compile jobs at a time, the memory requirement increases by multiple times accordingly.
  

The Xilinx Compilation Tool for ISE 14.7 has the following system requirements:

• Red Hat Enterprise Linux 6.5 (64-bit)
• 15 GB of additional disk space
  

Supported Hardware

The following sections contain the NI hardware supported by the FPGA Module Xilinx Compilation Tools on Linux. Devices that are compatible with the FPGA Module (64-bit) are in bold.

Xilinx Compilation Tool for Vivado 2017.2

Use the Xilinx Compilation Tool for Vivado 2017.2 to compile FPGA VIs for the following devices:

• cRIO-903x/904x/905x/906x
• IC-317x
• myRIO-1900/1950
• NI ELVIS III
• NI ELVIS RIO Control Module
• NI-9145/9147/9149
• PCIe-576x/577x/5785/782xR/7846/7856/7857/7858/798x
• PXIe-5163R/5164R/517xR/5624R/5745/576x/577x/5785/5840R/659xR/782xR/784x/785x/786xR/7902R/791x/793xR/797xR/798x
• roboRIO
• sbRIO-9651/9607/9627/9637
• USB-784xR/785xR
• USRP-RIO devices
  

Xilinx Compilation Tool for ISE 14.7

Use the Xilinx Compilation Tool for ISE 14.7 to compile FPGA VIs for the following devices:

• cRIO-907x/908x/911x
• IC-312x
• NI-9144/9146/9148/915x
• NI CVS-145x/145xRT
• PCIe-7841R/7842R/7851R/7852R/1473R/8237R
• PXIe-796xR/564xR
• PXI-784xR/785xR/795xR
• sbRIO-9605/9606/961x/962x (excluding 9627)/963x (excluding 9637)/964x
  

Visit ni.com/info and enter the Info Code XilinxCompileTools for more information about the NI hardware supported by each Xilinx compilation tool.

Installation Instructions

Complete the following steps to install the FPGA Module Xilinx Compilation Tools for Linux:

• Log into the system as root.
• Use mount to mount the compilation tools installer.
• If the media type is DVD, change the current directory to the mount point.
  If the media type is USB, change the current directory to mount point/Linux/Vivado2017_2 or mount point/Linux/ISE14_7, depending on which tool you want to install.
• To run the installation script, enter sh ./INSTALL.
  

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.

---

Legal Information

Copyright

© 2012–2019 National Instruments. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

Third-Party Copyright Notices

The SharpZipLib_Notice.pdf file contains a third-party copyright notice for third-party components used by certain FPGA Module features. The following directory is the default installation location for the file, but the location might vary depending on the configuration of the local computer:

/usr/local/natinst/nifpgacompileworker/doc

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

/usr/local/natinst/nifpgacompileworker/doc

U.S. Government Restricted Rights

If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.

IVI Foundation Copyright Notice

Content from the IVI specifications reproduced with permission from the IVI Foundation.

The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

374740K-01