NI-Industrial Communications for Ethernet/IP 1.2.1 Win32/64Eng NI以太网/IP

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI-Industrial Communications for Ethernet/IP 1.2.1 Win32/64Eng NI以太网/IP 工业通信软件1.2.1下载

NI-Industrial Communications for Ethernet/IP
NI-Industrial Communications for Ethernet/IP使LabVIEW系统能够作为以太网/IP网络上的以太网/IP Class 1适配器设备进行通信。
NI-Industrial Communications for Ethernet/IP是一款应用软件，为您使用CompactRIO控制器、CompactRIO单板控制器、PXI控制器、紧凑型视觉系统、智能相机、工业控制器或独立CompactDAQ系统提供了所需的支持。它包含丰富的LabVIEW VI和属性库，助您快速为兼容的以太网/IP硬件设备创建自定义的以太网/IP应用程序。该软件具有显式消息传递和I/O数据通信机制。这些机制提供与各种可编程逻辑控制器(PLC)和以太网/IP I/O设备的通信和数据共享。

1.2.1
文件大小: 165539976 字节 (157.87 MB)
修改日期: 2012-09-10 22:18
MD5: 70962e52699714b27f741305dfc088ee
SHA1: 52bb168aadfc399dab9d447015dc601e03b37a60
SHA256: 2bd2e6b54ed63c9f602e8aac8781a1e84dbe0fc714d9d5839183d3a050b3e5f4
CRC32: d8bd152f

百度网盘和NI官方下载地址：
IndComEIP1.2.1.txt (628 Bytes, 下载次数: 0, 售价: 10 元)

2020-11-12 23:40 上传

点击文件名下载附件

NI-Industrial Communications for EtherNet/IP Readme

Version 1.2.1

July 2012

This file contains information about the NI-IndCom for EtherNet/IP software for Windows 7/Vista/XP and LabVIEW™ Real-Time (RT). Information in this file is organized in the following sections:

Overview

New Features and Changes

EtherNet/IP 1.2.1

EtherNet/IP 1.2

EtherNet/IP 1.1

System Requirements

Installation Instructions

Accessing the Help

Finding Examples

---

Overview

The NI-IndCom for EtherNet/IP software contains an extensive library of VIs and properties you can call from LabVIEW to program your customized EtherNet/IP applications for your devices.

New Features and ChangesEtherNet/IP 1.2.1

• Added support for NI License Manager
• Added support for LabVIEW 2012 32-bit and 64-bit
• (Bug ID 336355) Resolved a problem that EtherNet/IP can not be included in the installer created using Application Builder
  

EtherNet/IP 1.2

• Added support for LabVIEW 64-bit
• Added support for LabVIEW 2011
• (Bug ID 307085) Resolved a stability issue seen only in LabVIEW RT 2009
• (Bug ID 305672) Resolved a problem that ethernetIPInterface.dll is not exported when building an EIP Windows application
  

EtherNet/IP 1.1

• First official release to support EtherNet/IP
• Added example VIs to show how to use the VI APIs for creating EtherNet/IP applications
• Added more LabVIEW error codes to better diagnose problems
  

System RequirementsSupported Operating Systems

You can install and run this version of the NI-IndCom for EtherNet/IP software on the following operating systems:

• Windows 7 (32-bit and 64-bit)
• Windows Vista (32-bit and 64-bit)
• Windows XP (32-bit)
• Windows Server 2003 R2 (32-bit)
• Windows Server 2008 R2 (64-bit)
  

The NI-IndCom for EtherNet/IP installer does not support Windows NT/Me/2000/98/95 or the Windows Server non-R2 editions.

Caution  If you upgrade your system from a prior version of Microsoft Windows to Microsoft Windows Vista, you must uninstall all National Instruments software prior to performing the upgrade. After the upgrade is complete, you can reinstall your National Instruments software.

Supported Hardware

The NI-IndCom for EtherNet/IP software supports the following NI hardware products in the LabVIEW Real-Time Module:

• Desktop PCs
  

• NI PXI controllers
  

• NI CompactRIO
  

• NI industrial controller
  

• NI smart cameras
  

• NI Compact Vision System
  

• NI Embedded Vision System
  

Software Requirements

NI-IndCom for EtherNet/IP software requires at least one of the following software applications:

• LabVIEW 2009 (32/64-bit), 2010 (32/64-bit), 2011 (32/64-bit), and 2012 (32/64-bit)
  

If you want to run EtherNet/IP software on the NI real-time hardware platforms, you also should install the LabVIEW Real-Time module:

• LabVIEW Real-Time (ETS) 2009, 2010, 2011 and 2012
  

Installation Instructions

Before installing the NI-IndCom for EtherNet/IP software, log on as Administrator or as a user with Administrator privileges. The NI-IndCom for EtherNet/IP software setup program must have Administrator privileges because the program modifies the configuration registry of your system. Complete the following steps to install the NI-IndCom for EtherNet/IP software:

• Insert the NI-IndCom for EtherNet/IP software CD into your CD-ROM drive. The installer launches if your CD-ROM drive plays data CDs automatically. If the installer does not launch automatically, navigate to the CD using Windows Explorer and launch the autorun.exe file from your NI-IndCom for EtherNet/IP software CD.
• The installation wizard guides you through the necessary steps to install the NI-IndCom for EtherNet/IP software. You can go back and change values where appropriate by clicking the Back button. You can exit the setup where appropriate by clicking Cancel.
• When the installation is complete, click Finish.
  

Installing the Software on a Real-Time Target

Complete the following steps to install the NI-IndCom for EtherNet/IP software on a real-time target in Measurement & Automation Explorer (MAX):

• Expand Remote Systems in the configuration tree and expand your real-time target.
• Select the Software category. Click the Add/Remove Software icon on the toolbar to launch the LabVIEW Real-Time Software Wizard.
• If the real-time target is a CompactRIO controller, select Custom software installation.
• Select NI-IndCom for EtherNet/IP in the feature list and click Next.
• Follow the remaining installation instructions until installation is complete.
  

Accessing the Help

Refer to the NI-Industrial Communications for EtherNet/IP Help, accessible by selecting Help»NI-Industrial Communications for EtherNet/IP from the pull-down menu in LabVIEW, for information about using the NI-Industrial Communications for EtherNet/IP software.

Finding Examples

LabVIEW examples for the NI-Industrial Communications for EtherNet/IP software are in the labview\examples\ethernetip folder. You can modify an example VI to fit an application or copy and paste from one or more examples into a VI you create.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information, refer to the following KnowledgeBase articles:

• For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
• For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
  

---

Important Information

Copyright

© 2010-2012 National Instruments. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:

• Notices are located in the \_Legal Information and directories.
• EULAs are located in the \Shared\MDF\Legal\license directory.
• Review \_Legal Information.txt for information on including legal information in installers built with NI products.
  

Trademarks

LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information section at ni.com/trademarks for other National Instruments trademarks.

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.