NI Automotive Diagnostic Command Set Toolkit 19.0 Full Offline Win32/64Eng 汽车诊断命令集工具包ADCS19.0完整离线安装版下载

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI Automotive Diagnostic Command Set Toolkit 19.0 Win32/64Eng 汽车诊断命令集工具包ADCS19.0

汽车诊断命令集工具包Automotive Diagnostic Command Set Toolkit
汽车诊断命令集工具包为ECU生产测试设计和开发汽车诊断应用程序。
汽车诊断命令集(ADCS)工具包是LabVIEW、LabWindows/CVI和Microsoft Visual Studio的软件附件。该附件适用于一系列汽车诊断应用，通常包括读取和写入参数、访问故障诊断代码(DTC)、闪存ECU固件以及启动ECU诊断测试模式。借助ADCS工具包，您可以开发单个应用程序，并根据需要随时进行部署，而无需额外部署或runtime许可证。该附件与许多NI汽车接口设备兼容，可简化各种便携式和车载诊断应用的开发，并提供对UDS、OBD、WWH-OBD等协议的支持。LabWindows标志经Microsoft公司授权使用。Windows是Microsoft公司在美国和其他国家的注册商标。

19.0
文件大小: 625463296 字节 (596.49 MB)
修改日期: 2019-05-28 13:01
MD5: 3a1cf2b4df65433c57ce900afbf48edb（官方正确）
SHA1: 4590724f6ef7d3db4cd4accb0318626406ed8aaa
SHA256: 282d0373a1295751a4030791bb55508fff9cf863b72a89e9dbdc1996e329cc65
CRC32: 50b24139

百度网盘和NI官方下载地址：
ADCS19.0.txt (627 Bytes, 下载次数: 5, 售价: 10 元)

2020-11-19 23:06 上传

点击文件名下载附件

Automotive Diagnostic Command Set 19.0 Readme

May 2019

This file contains important information about the Automotive Diagnostic Command Set software for Windows and LabVIEW Real-Time (RT), including installation instructions, new features, and known issues for Automotive Diagnostic Command Set 19.0.

---

Supported Operating Systems

Application Software Support

Supported Software and Hardware

Installation Instructions

ECU Simulator

Product Security and Critical Updates

New Features

Additional Programming Topics

Accessing the Help

Automating the Installation of NI Products

Using NI Software with Microsoft Windows 10

Using NI Software with Microsoft Windows 8.1

Using NI-XNET with the Automotive Diagnostic Command Set

Legal Information

---

Supported Operating Systems

Automotive Diagnostic Command Set 19.0 supports the following operating systems:

• Windows 10/8.11/7 SP12 (32-bit and 64-bit)
• Windows Server 2012 R21 (64-bit)
• Windows Server 2008 R2 SP11 (64-bit, not supported on Server Core Role)
  

1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.

2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.

Note  In 2016 National Instruments dropped support for Windows Vista, Windows XP, Windows Server 2003, and installations of Windows 7 without any service packs. Automotive Diagnostic Command Set will not install or run on an unsupported OS. You cannot deploy or distribute applications that use Automotive Diagnostic Command Set to an unsupported OS. Additionally, after installing this version of Automotive Diagnostic Command Set, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.

For more information about the changes to our OS support for 2016, refer to KB 79UC78LS, Why Does my LabVIEW, LabWindows/CVI, Measurement Studio, or TestStand Built Installer Fail on Windows XP/Vista and Server 2003?.

Note  Support for Windows 32-bit operating systems may require disabling physical address extension (PAE). To learn how this might affect your system and what actions you might need to take, visit ni.com/info and enter the Info Code PAESupport.

Application Software Support

This version of Automotive Diagnostic Command Set software supports the following development environments, including service packs.

Application Software	Versions Supported by Automotive Diagnostic Command Set 19.0
LabVIEW	2016, 2017, 2018, and 2019
LabVIEW Real-Time Module	2016, 2017, 2018, and 2019
LabWindows™/CVI™	2013 SP1 and later
Microsoft Visual C/C++	2008 and later

Note  The Automotive Diagnostic Command Set software does not support LabWindows™/CVI™ Real-Time Module.

Supported Software and HardwareThe Automotive Diagnostic Command Set software supports the following software and hardware:

• NI-CAN software version 16.0 or later
• NI-CAN hardware supported by NI-CAN 16.0
• NI-XNET software version 16.0 or later
• NI-XNET CAN and LIN hardware supported by NI-XNET 16.0 or later
• NI-XNET Automotive Ethernet hardware supported by NI-XNET 19.0 or later
• CompactRIO and R-Series hardware using NI 9852/9853 two-port CAN modules for NI CompactRIO (we recommend using NI 986x on NI CompactRIO instead of NI 985x)
  

Note  The Automotive Diagnostic Command Set software supports only National Instruments Automotive Ethernet, CAN, and LIN hardware products. For information about software for Automotive Ethernet, CAN, and LIN hardware products from other vendors, refer to the documentation you received with those products.

Installation Instructions

Before installing the Automotive Diagnostic Command Set software, log on as Administrator or as a user with Administrator privileges. The Automotive Diagnostic Command Set software setup program must have Administrator privileges because the program modifies the configuration registry of your system. Complete the following steps to install the Automotive Diagnostic Command Set software.

• If applicable, install an application development environment (ADE), such as LabVIEW, LabWindows/CVI, or Microsoft Visual Studio.
• Use NI Package Manager to install the Automotive Diagnostic Command Set Toolkit and Runtime, or download and install the software from NI Software Product Downloads.
  

Note  To download NI Package Manager, visit ni.com/info and enter the Info Code NIPMDownload. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.

ECU Simulator

The Automotive Diagnostic Command Set software provides an ECU simulation for CAN and LIN. All examples of the Automotive Diagnostic Command Set are preconfigured to communicate with the ECU simulation.

LabVIEW users can find the ECU simulator under \\examples\Automotive Diagnostic Command Set\ADCS Demo ECUs.llb.

Microsoft Visual C/C++ and LabWindows/CVI users can find the ECU simulators at

• \Users\Public\Documents\National Instruments\Automotive Diagnostic Command Set\Examples\MS Visual C\ADCS Demo ECU CAN Ethernet, or
• \Users\Public\Documents\National Instruments\Automotive Diagnostic Command Set\Examples\MS Visual C\ADCS Demo ECU LIN.
  

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.

New Features and Changes as Compared to Automotive Diagnostic Command Set 18.5

The Automotive Diagnostic Command Set 19.0 release adds the following features:

• Added support for LabVIEW 2019.
• Added support for LabVIEW Linux PXI RT.
• Added support for LabWindows™/CVI™ 2019.
• Added 0xFF flag for DoIP broadcast messages.
• Added support for session-based properties.
• Added support for the PXIe-8521 4-port, 100BASE-T1 PXI Automotive Ethernet Interface Module.
• Added support for installation through NI Package Manager.
• Removed support for LabVIEW 2015.
• Removed support for LabWindows™/CVI™ 2012 and 2013 (without SP1).
• Removed support for NI-CAN 15.0.
• Removed support for NI-XNET 15.0.
  

New Features and Changes as Compared to Automotive Diagnostic Command Set 18.0

The Automotive Diagnostic Command Set 18.5 release adds the following features:

• Added support for LabVIEW 2018 SP1.
• Added support for Diagnostic over IP 2012 Protocol Version.
• Added support for Tester Present Auto Timing.
• Added support for ECU Determined CAN I/O Mode​. CAN I/O mode can be set to "ECU Determined" to use ECUs with CAN 2.0 or CAN FD.
• Added Response Plausibility Check property​. Defines whether the first byte of the diagnostic response is checked to contain the + 0x40 offset (positive response) or whether the first byte is 0x7F (negative response)​.
  

New Features and Changes as Compared to Automotive Diagnostic Command Set 15.0

The Automotive Diagnostic Command Set 18.0 release adds the following features:

• Added support for LabVIEW 2016, LabVIEW 2017, and LabVIEW 2018.
• Added support for ISO CAN FD.
• Added support for Diagnostic over IP over non-primary NICs.
• Added support for LIN sleep for UDS.
• Removed support for LabVIEW 2012, LabVIEW 2013, and LabVIEW 2014.
• Removed support for LabWindows™/CVI™ 2010 and earlier versions.
  

New Features and Changes as Compared to Automotive Diagnostic Command Set 14.0

The Automotive Diagnostic Command Set 15.0 release adds the following features:

• Added support for LabVIEW 2015.
• Removed support for LabVIEW 2011.
• Added support for 64-bit LabVIEW and C/C++.
• Added support for CompactRIO Real-Time Controllers supported by NI-XNET 15.0 (NI cRIO-9081, NI cRIO-9082, NI cRIO-903x).
  

New Features and Changes as Compared to Automotive Diagnostic Command Set 1.2

The Automotive Diagnostic Command Set 14.0 release adds the following features:

• Added support for LabVIEW 2014.
• Removed support for LabVIEW 2010.
• Added support for WWH-OBD (World-Wide-Harmonized On-Board Diagnostics) based on ISO 27145.
• Added the new Get Time Stamp function to measure timestamp information of the first/last send/received frame of the ISO TP for CAN and LIN.
• Added support for NI cRIO-9068 Controller (based on NI Linux Real-Time OS).
  

Additional Programming Topics

The Automotive Diagnostic Command Set software installs the necessary C/C++ support files in the following locations:

• The typical path to the C examples folder is \Users\Public\Documents\National Instruments\Automotive Diagnostic Command Set\Examples\MS Visual C.
• The header file for Visual C/C++ 2008 and 2015 is in the Program Files\National Instruments\Shared\ExternalCompilerSupport\C\include folder.
• The library file is in the Program Files\National Instruments\Shared\ExternalCompilerSupport\C\lib32\msvc folder.
  

Using the VW Transport protocol with NI-XNET:

• If you are using the VW Transport Protocol on NI-XNET hardware, we suggest using the Frame Stream Input and Output Mode. Example: CAN1@ni_genie_nixnet uses CAN interface 1 on NI-XNET with Frame Stream Mode.
  

Accessing the Help

The Automotive Diagnostic Command Set Help is the primary reference document for Automotive Diagnostic Command Set. This manual includes an introduction to diagnostic protocols. It also includes information about how to get started with application development and a complete reference for all Automotive Diagnostic Command Set functions.

To open the Automotive Diagnostic Command Set Help, go to: \Users\Public\Documents\National Instruments\Automotive Diagnostic Command Set\Documentation.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:

• For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Customize and Automate Installation of a Single Installer.
• For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, Customize and Automate Installation of a Suited Installer.
• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, Determine Type and Version of My National Instruments Installer.
  

Using NI Software with Microsoft Windows 10

Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.

Using NI Software with Microsoft Windows 8.1

When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.

Using NI-XNET with the Automotive Diagnostic Command Set

If you are using NI hardware that is supported by NI-XNET, it is recommended that you use NI-XNET 19.0 or later with Automotive Diagnostic Command Set 19.0.

CAN FD support with the Automotive Diagnostic Command Set

CAN FD features are only supported with NI-XNET version 17.0.1 or later.

NI does not recommend cRIO-901x and cRIO-902x targets for CAN FD.

Recommended Maximum Message Length for CAN FD

NI recommends the following maximum message length for CAN FD based on the system RAM size.

System RAM Size	Maximum Message Length
≤512 MB	8 MB
512 MB – 3.5 GB	64 MB
>3.5 GB	256 MB

---

Legal Information

Copyright

© 2009–2019 National Instruments. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

• Notices are located in the \_Legal Information and directories.
• EULAs are located in the \Shared\MDF\Legal\license directory.
• Review \_Legal Information.txt for information on including legal information in installers built with NI products.
  

U.S. Government Restricted Rights

If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.

IVI Foundation Copyright Notice

Content from the IVI specifications reproduced with permission from the IVI Foundation.

The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the NI products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.

375413E-01

sushu

需要这个工具包