石鑫华视觉论坛微信公众号:石鑫华视觉

 找回密码
 注册会员
查看: 2338|回复: 0

[LV工具模块] NI ECU Measurement and Calibration Toolkit 14.0 Win32Eng NI电子控制单元测量和校准工具包ECUMC14.0下载

[复制链接]
  • TA的每日心情
    慵懒
    12 小时前
  • 签到天数: 3156 天

    连续签到: 26 天

    [LV.Master]2000FPS

    发表于 2020-11-22 22:54:52 | 显示全部楼层 |阅读模式 来自:广东省东莞市 联通

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有账号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

    视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

    NI ECU Measurement and Calibration Toolkit 14.0 Win32Eng NI电子控制单元测量和校准工具包ECUMC14.0下载

    ECU测量和校准工具包
    ECU测量和校准(ECUMC)工具包用于为电子控制单元(ECU)设计和验证提供测量和校准。
    ECU测量和校准工具包是LabVIEW、LabWindows/CVI和Microsoft C/C ++编程环境的软件附件。该软件支持通用测量和校准协议(Universal Measurement and Calibration Protocol,XCP)及CAN校准协议(CAN Calibration Protocol,CCP),提供了许多高级且易用的函数。这些协议可让用户可根据ASAM (.A2L)数据库文件的定义,读写内部ECU变量及特性。通过(.A2L)数据库文件,工具包自动应用所有换算信息并以工程单位返回数据,便于简单地分析、演示及记录。此外,该工具包还提供了常见应用的示例,例如使用一维到三维用户界面来测量ECU变量或控制ECU特性。LabWindows标志经Microsoft公司授权使用。Windows是Microsoft公司在美国和其他国家的注册商标。

    14.0
    文件大小: 358797452 字节 (342.18 MB)
    修改日期: 2019-06-25 02:42
    MD5: 9a87f10c1e72b2cd35573c468828d316(官方一致)
    SHA1: 59813796a21a7bec905881675023b1152ad6cd0f
    SHA256: 303ec008b5bf9b26d79d39b2a279cf8cb17edddafd9903f0fa44a6dfaa20112e
    CRC32: 513e2a76

    百度网盘和NI官方下载地址:
    ECUMC14.0.txt (601 Bytes, 下载次数: 0, 售价: 10 元)

    ECU Measurement and Calibration Toolkit (ECU M&C) 14.0 Readme
    August 2014
    Thank you for using National Instruments products.
    For more information about this product, refer to ni.com/support.
    This file contains information about the ECU Measurement and Calibration Toolkit (ECU M&C) Software for Windows 8/7/Vista/XP and LabVIEW™ Real-Time (RT). Information in this file is in the following sections:
    Documentation
    Installation
    Installing the ECU Measurement and Calibration Toolkit with a LabWindows/CVI Upgrade
    Supported Operating Systems
    Supported Software and Hardware
    Supported Development Environments
    ECU Simulator
    Using LabVIEW Real-Time (RT)
    New Features Compared to ECU M&C Toolkit 1.0
    New Features Compared to ECU M&C Toolkit 2.0
    New Features Compared to ECU M&C Toolkit 2.1
    New Features Compared to ECU M&C Toolkit 2.1.2
    New Features Compared to ECU M&C Toolkit 2.1.4
    New Features Compared to ECU M&C Toolkit 2.1.5
    New Features Compared to ECU M&C Toolkit 2.2
    New Features Compared to ECU M&C Toolkit 2.2.1
    New Features Compared to ECU M&C Toolkit 2.3
    New Features Compared to ECU M&C Toolkit 2.3.1
    Additional Programming Topics and Known Issues
    Additional Topics and Known Issues for use of XCP/CCP Custom Device for NI VeriStand
    Bug Fixes
    Automating the Installation of NI Products
    How to Use NI Software with Microsoft Windows 8.x
    NI Software Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003
    Legal Information

    Documentation
    The ECU Measurement and Calibration Toolkit User Manual is the primary reference document. This manual includes an introduction to the CAN Calibration Protocol (CCP) and Measurement and Calibration Protocol (XCP). It also explains how to get started with application development and includes a complete reference for all ECU M&C Toolkit functions.
    The ECU Measurement and Calibration Toolkit User Manual is in Adobe Acrobat Portable Document Format (PDF). You can download the Acrobat Reader for free at www.adobe.com.
    You can open the ECU Measurement and Calibration Toolkit User Manual from Start» Programs»National Instruments»ECU MC Toolkit»ECU Measurement and Calibration Toolkit Manual.
    Links to the NI-CAN Hardware and Software Manual are in the online help for each NI-CAN function within the National Instruments LabVIEW and LabWindows™/CVI™ development environments.
    Online help for the NI-CAN features within Measurement & Automation Explorer (MAX) is in the MAX Help Topics menu. The MAX help topics for NI-CAN also include a link to the NI-CAN Hardware and Software Manual.
    Back to Top

    Installation
    Before installing the ECU M&C Toolkit software, log on as Administrator or as a user with Administrator privileges. The ECU M&C Toolkit software setup program must have Administrator privileges because the program modifies the configuration registry of your system. Complete the following steps to install the ECU M&C Toolkit software:
    • Insert the ECU M&C Toolkit software CD into your CD-ROM drive. The installer launches if your CD-ROM drive plays data CDs automatically. If the installer does not launch automatically, navigate to the CD using Windows Explorer and launch the autorun.exe file from your ECU M&C Toolkit Software CD.
    • The installation wizard guides you through the necessary steps to install the ECU M&C Toolkit software. You can go back and change values where appropriate by clicking the Back button. You can exit the setup where appropriate by clicking Cancel.
    • When the installation is complete, click Finish.
    Back to Top

    Installing the ECU Measurement and Calibration Toolkit with a LabWindows/CVI Upgrade
    When you execute a LabWindows/CVI upgrade, and the ECU Measurement and Calibration Toolkit is installed on your computer, the ECU Measurement and Calibration Toolkit supports the earlier LabWindows/CVI version.
    To use the ECU Measurement and Calibration Toolkit in the new LabWindows/CVI version, complete the following steps:
    • Uninstall the ECU Measurement and Calibration Toolkit using the Windows Control Panel (Add or Remove Programs»National Instruments Software»NI ECU Measurement and Calibration Toolkit).
    • Reinstall the ECU Measurement and Calibration Toolkit. The installation routine now recognizes the new LabWindows/CVI version and installs the support for the new LabWindows/CVI version.
    Note: The ECU Measurement and Calibration Toolkit is no longer supported in the earlier LabWindows/CVI version after you complete these steps.
    Back to Top

    Supported Operating Systems
    This version of the ECU M&C Toolkit software supports only the following operating systems:
    • Windows 8 (32-bit and 64-bit)
    • Windows 7 Service Pack (SP) 1 (32-bit and 64-bit) or newer
    • Windows Vista (32-bit and 64-bit)
    • Windows XP SP3(32-bit) or newer
    For more information about using National Instruments hardware and software products with Windows 7, refer to ni.com/windows7.
    National Instruments recommends using Service Pack 2 when using the USB-847x interfaces in hyperthread or multicore/CPU environments on Microsoft Windows XP.
    Back to Top

    Supported Software and Hardware
    This version of the ECU M&C Toolkit software supports the following software and hardware:
    • NI-CAN software version 2.7 or newer
    • NI-CAN hardware supported by NI-CAN 2.7
    • NI-XNET software version 14.0 or newer
    • NI-XNET CAN hardware supported by NI-XNET 14.0
    • CompactRIO and R-Series hardware using the NI 9852/NI 9853 CAN Module for CompactRIO
    The ECU M&C Toolkit software supports only National Instruments CAN hardware products. For information about software for CAN products from other vendors, refer to the documentation you received with those products.
    Note: PCMCIA-CAN and PCMCIA-CAN/2 interfaces are not supported on the 64-bit version of Windows Vista.
    Back to Top

    Supported Development Environments
    This version of the ECU Measurement and Calibration Toolkit supports the following development environments:
    • LabVIEW 2011 (32-bit and 64-bit), 2012 (32-bit and 64-bit), 2013 (32-bit and 64-bit), 2014 (32-bit and 64-bit)
    • LabVIEW Real-Time (ETS) 2011, 2012, 2013, 2014
    • LabWindows/CVI 8.5 or newer
    • NI VeriStand 2010, NI VeriStand 2011, NI VeriStand 2012, NI VeriStand 2013
    • Microsoft Visual C/C++ 6.0
    Note: You can use the ECU M&C Toolkit on CompactRIO or R-Series with LabVIEW 2009 or newer only.
    Back to Top

    ECU Simulator
    The ECU M&C Toolkit software simulates an ECU. All ECU M&C Toolkit examples are preconfigured to communicate with the ECU simulation using the ASAM 2MC CCPECU.A2L file if using CCP or the XCPECU.A2L file if using the XCP Slave Simulator.
    LabVIEW users using CCP can find the ECU simulator, seed-key DLL, and corresponding A2L file at \\Examples\ECUMC.
    LabVIEW users using XCP can find the ECU simulator, seed-key DLL, and corresponding A2L file at \\Examples\ECUMC.
    MS VC users using CCP can find the ECU simulator, seed-key DLL, and corresponding A2L file at C:\Documents and Settings\All Users\Documents\National Instruments\ECU Measurement and Calibration Toolkit\Examples\MS Visual C\CCPECU.
    MS VC users using XCP can find the ECU simulator, seed-key DLL, and corresponding A2L file at C:\Documents and Settings\All Users\Documents\National Instruments\ECU Measurement and Calibration Toolkit\Examples\MS Visual C\XCPECU.
    Back to Top

    Using LabVIEW Real-Time (RT)
    To use the ECU M&C Toolkit on a LabVIEW RT system, you must download your ASAM 2MC database (*.A2L) file to the RT target. The LabVIEW Real-Time Engine running on the PXI LabVIEW Real-Time controller supports a File Transfer Protocol (FTP) server. You can access the LabVIEW RT target FTP server using any standard FTP utility for transferring files to and from the hard drive or CompactFlash. For further information about how to download your A2L file to the RT target, refer to LabVIEW Real-Time (RT) Configuration in the ECU Measurement and Calibration Toolkit User Manual.
    Back to Top

    New Features Compared to ECU M&C Toolkit 1.0
    The ECU M&C Toolkit 2.0 release adds the following features:
    • Support for Universal Measurement and Calibration Protocol (XCP) on CAN and Ethernet (TCP and UDP).
    • New property for Measurements and Characteristics: Comment.
    • New property for DAQ Lists: Samples Pending.
    Back to Top

    New Features Compared to ECU M&C Toolkit 2.0
    The ECU M&C Toolkit 2.1 release adds the following features:
    • Support for LabVIEW 8.2.0.
    • New MC DAQ List Initialize VI for LabVIEW and mcDAQListInitialize function for C define a DAQ list on a specific DAQ list number.
    • Support for the 32 and 64-bit versions of Windows Vista.
    • You now can write the X axis of a characteristic using the mcPropChar_X_Axis property.
    • You now can write the Y axis of a characteristic using the mcPropChar_Y_Axis property.
    • You can change the byte order of a characteristic from Intel to Motorola and vice versa using the mcPropChar_ByteOrder property.
    • You can change the byte order of a measurement from Intel to Motorola and vice versa using the mcPropMeas_ByteOrder property.
    • Support for NI USB-8473 (1-port, High-Speed CAN, USB interface) and NI USB-8473s (1-port, High-Speed CAN, USB interface with synchronization).
    Back to Top

    New Features Compared to ECU M&C Toolkit 2.1
    The ECU M&C Toolkit 2.1.1 release adds the following features:
    • Support for LabVIEW 8.5 and 8.6.
    • Support for LabWindows/CVI 8.5.
    • New set of functions to generate measurements without an A2L database (mcECUCreate, mcConversionCreate, mcEventCreate, and mcMeasurementCreate).
    • New read mode for DAQ List to acquire DAQ List data as timestamped value pairs.
    • You can activate address mapping if defined in an A2L database using the mcPropECU_MappingMode property.
    • You can specify distinct mapping directions if defined in an A2L database using the mcPropECU_MappingSource and mcPropECU_MappingTarget properties.
    • You can deactivate the use of the CCP command EXCHANGE_ID, which is used by default when a connection to an ECU is initiated.
    • You can deactivate the use of all optional CCP commands such as GET_SEED, UNLOCK, DNLOAD_6, and more using the related properties mcPropOptCmd_xxx.
    Back to Top


    New Features Compared to ECU M&C Toolkit 2.1.2
    The ECU M&C Toolkit 2.1.2 release adds the following features:
    • Support for LabVIEW 2009.
    • Support of CompactRIO (Pharlap and VxWorks based targets) and R-Series.
    Back to Top


    New Features Compared to ECU M&C Toolkit 2.1.4
    The ECU M&C Toolkit 2.1.5 release adds the following features:
    • Support for LabVIEW 2010.
    • Removed support for LabVIEW 8.2.
    Back to Top


    New Features Compared to ECU M&C Toolkit 2.1.5
    The ECU M&C Toolkit 2.2 release adds the following features:
    • Support for LabVIEW 2011.
    • Removed support for LabVIEW 8.5.
    • Support for NI VeriStand 2010.
    • Support for NI VeriStand 2011.
    • Support for Logging of CCP commands within the XCP Spy utility. The utility has been renamed into "CCP and XCP Spy"
    • Support for ECU variants.
    • Support for reading ECU object hierarchies out of ASAM A2L files that support the GROUP keyword.
    • Support for converting measurement values into symbolic text entities.
    • Native support for NI-XNET for the ECU M&C ECU simulator and all examples.
    • New property mcPropDAQ_TimeSinceLastFrame to verify last received DAQ List timestamp to verify ECU connection status and DAQ List operation.
    • New property mcPropECU_SeedChkDllPath to use seedkey DLLs from different location as corresponding ASAM A2L file.
    • New example of how to use a remote seedkey (for example, if the original seedkey does not support the target operating system).
    • The ECU MC Installer does not contain driver software for your NI-CAN or NI-XNET hardware products. Those installers are part of your hardware. You can download the latest installers from ni.com.
    Back to Top

    New Features Compared to ECU M&C Toolkit 2.2
    The ECU M&C Toolkit 2.2.1 release adds the following features:
    • Support for LabVIEW 2012.
    • Removed support for LabVIEW 8.6.
    • Support for converting symbolic text entities into measurement values.
    • New property mcPropDAQList_Name to query the name of a predefined DAQ List.
    • New property mcPropDAQList_DisplayIdentifier to query the name of a predefined DAQ List Identifier.
    • New property mcPropChar_Scale_Factor reads the scaling factor defined for a Characteristic in the A2L database.
    • New property mcPropChar_Scale_Offset reads the scaling offset defined for a Characteristic in the A2L database.
    • New property mcPropChar_Scale_Type reads the scaling type defined a Characteristic in the A2L database.
    • New property mcPropChar_Scale_TextValues_Size reads the length needed to store the comma separated list of text values that can be converted into raw values.
    • New property mcPropChar_Scale_TextValues reads the comma-separated list of text values that can be converted into raw values.
    • New function mcTextToDouble converts a numerical value to a text string using an enumeration or range text scaling.
    • New features within the XCP/CCP Custom Device for NI VeriStand:
      • Support to set the Event Channel Number as decimal instead of using the Event Channel number from the A2L database.
      • Support to set the ECU Byte Order instead of using the ECU Command Byte Order from the A2L database.
      • Support to set the Command Byte Order instead of using the Command Byte Order from the A2L database.
      • Support to set the Delay before reconnect time. This time defines the time to wait after an CCP/XCP communication error before trying to connect to the ECU again.
      • Support to manually connect or disconnect a CCP/XCP connection. The Connect Channel allows to disconnect and reconnect the ECU when the VeriStand application is running. For example, it allows you to stop the ECU, reflash it with an external program, and restart it without stopping VeriStand.
      • Support to use Multiple Master Devices in a single System Explorer Definition. (Note: Each Master must use a different Custom Device Communication Port.)

    Back to Top



    New Features Compared to ECU M&C Toolkit 2.2.1
    The ECU M&C Toolkit 2.3 release adds the following features:
    • Added support for NI VeriStand 2012.
    • The NI VeriStand 2012 Custom Device supports Multiple DAQ Lists with independent timing.
    • The NI VeriStand 2012 Custom Device supports manually setting the DAQ List Prescaler value.
    • If using NI-XNET hardware, the ECU M&C Toolkit uses Frame Queue Session by default.
    • Support for reading ECU object hierarchies out of ASAM A2L files that support the FUNCTION keyword.
    • Added native NI-XNET support for all CVI examples.
    Back to Top


    New Features Compared to ECU M&C Toolkit 2.3
    The ECU M&C Toolkit 2.3.1 release adds the following features:
    • Added support for LabVIEW 2013.
    • Removed support for LabVIEW 2009.
    • Added a new utility NI ECU MC A2L Viewer which can import and display ASAM A2L files.
    • Added property mcPropECU_LogFileName in order to log CCP or XCP protocol trafic into an ASCII file. On LabVIEW RT and CompactRIO targets, the logfile is created on the target system and needs to be transferred to the host after logging has been completed. Note that no additional CAN port is used for the logging which makes this method superior to any other method like running a bus monitor in parallel.
    • Added ECU timeout properties mcPropECU_XCP_Timeout_T1, mcPropECU_XCP_Timeout_T2, mcPropECU_XCP_Timeout_T3, mcPropECU_XCP_Timeout_T4, mcPropECU_XCP_Timeout_T5, mcPropECU_XCP_Timeout_T6, mcPropECU_XCP_Timeout_T7 which are defined in the ASAM XCP standard for the various XCP commands. For details which timeout applies to a specific command, please refer to the ASAM XCP standard. The values are typically read from an A2L file but may be overridden manually. Note that this value might be modified by the mcPropECU_TimingFactor property.
    • Added ECU timeout properties mcPropECU_CCP_Timeout_T_std , mcPropECU_CCP_Timeout_T_pgm, mcPropECU_CCP_Timeout_T_mem, mcPropECU_CCP_Timeout_T_diag, mcPropECU_CCP_Timeout_T_act which are defined in the ASAM XCP standard.
    Back to Top


    New Features Compared to ECU M&C Toolkit 2.3.1
    The ECU M&C Toolkit 14.0 release adds the following features:
    • Added support for NI VeriStand 2013.
    • Added support for LabVIEW 2014.
    • Removed support for LabVIEW 2010.
    • Added 64-bit user mode support for LabVIEW 2011-2014 64-bit versions.
    • Enhanced selection possibilities of Calibration Pages.
    • Added selection of Calibration Pages for NI VeriStand 2013 Custom Device.
    • Added Remote Seedkey configuration by ECU M&C API and NI VeriStand 2013 Custom Device.
    • Added support for NI cRIO-9068 Controller (based on NI Linux Real-Time OS).
    Back to Top

    Additional Programming Topics and Known Issues
    ECU M&C Toolkit 2.2 supports CCP Version 2.1.
    ECU M&C Toolkit 2.2 does support symbolic conversion tables for reading only. Refer to mcDoubleToText for further information.
    NI-I/O Trace monitors function calls to the ECU M&C Toolkit API. This tool helps in debugging programming problems in the application. To launch this tool, open the Software branch of the MAX Configuration tree, right-click NI I/O Trace, and select Launch NI I/O Trace. If more than one National Instruments driver is installed on your computer, you can specify which APIs to spy on at any time. By default, all installed APIs are enabled. To select the APIs to spy on, select Spy»Options, select the View Selections tab, and select the APIs under Installed API Choices.
    The following LabVIEW example VIs do not run under LabVIEW Real-Time and LabVIEW Base Development System:
    • Edit a characteristic.vi
    • Measurement and Calibration Application.vi
    To make these examples run, remove the subVI call from 3DDisplayWrapper.vi in MCCharacteristicsEditors.llb.
    If you are using an NI USB-8473 or NI USB-8473s, the ECU M&C Toolkit is based internally on the NI-CAN Frame API. For this reason, the following properties are not available for the GetProperty function:
    • CRO Task (mcPropCRODAQ_DTO_Task)
    • DTO Task (mcPropDAQ_DTO_Task)
    • SamplesPending (mcPropDAQ_SamplesPending)
    The LabVIEW project examples for CompactRIO and R-Series are configured for use with NI 985x C-Series only.
    The ECU M&C ECU Simulator (DemoECU) is not supported under CompactRIO.
    The Basic Examples and some advanced examples are not supported under cRIO using XCP/TCP and XCP/UDP. To use those examples, you need to modify the communication parameters like the IP Address.
    Errata to the ECU M&C Documentation: mcDAQReadTimestamped is documented as not waiting for messages, returning samples from messages received since the previous function call. In fact, mcDAQReadTimestamped waits until NumberOfSamplesToRead has been collected. To avoid blocking, use mcPropDAQ_SamplesPending to check the number of collected samples.
    Known Functional Issue: Bug ID 407844: mcDAQReadTimestamped does not return correct timestamp information. This issue will be fixed in the next release. If you would like more information about this issue, contact NI and reference the ID number given in this document. You can contact us through any of the normal support channels including phone, email, or the discussion forums. Refer to www.ni.com/contact to contact us.
    Back to Top

    Additional Topics and Known Issues for XCP/CCP Custom Device for NI VeriStand
    ECU M&C Toolkit 14.0 supports NI VeriStand 2010, 2011, 2012 and 2013.
    Refer to the XCP/CCP Custom Device online help for information about using the NI XCP/CCP Custom device with VeriStand 2010 and 2011.
    Upgrade Note: If you are upgrading your XCP/CCP Custom Device from the already-installed National Instruments Developer Zone download, you need to clear the XCP/CCP controls from the NI VeriStand project temporary screen files directory.
    Upgrading Existing VeriStand System Definitions From a Previous Custom Device Version: System Definitions created with an older version of the XCP/CCP Custom Device need to be mutated to the new version before they can be used. You can mutate the system definition by opening the System Definition file in the System Explorer and saving.
    The CCP/XCP on CAN communication introduces higher busloads on the CAN network: If you are using CCP or XCP on CAN, the NI VeriStand Custom Device can add flexible configurations for reading and writing Characteristics and Measurements from the ECU. The new feature in the 2.3 release for NI VeriStand 2012 allows you to run multiple Characteristic as well as Measurement read or write tasks in parallel. If you set up such a complex system, every task introduces some amount of busload onto the CAN network, because those CCP/XCP commands are based on a handshake protocol. If you run the CCP/XCP on CAN a protocol to its limits, the introduced busload on the CAN network increases significantly, and the ECU may not respond in the predefined time anymore. The reason is that there may not be enough free network bandwidth. In such cases, we recommended analyzing the CAN busload on the CAN network and trying to keep CAN traffic below values of 60% to 70%, to keep the network in an operable state. A typical indicator of running into such CCP/XCP on CAN protocol limits is a timeout error when executing a Characteristic/Measurement read or write operation. Therefore, we recommend checking the XCP/CCP Custom Device error status variable, whether the error 0xFFFB67FE "A timeout occurred waiting for a response from the ECU" occurs.
    Back to Top

    Bug Fixes
    The following items are the IDs and titles of a subset of issues fixed between ECU M&C Toolkit 2.1.0 and ECU M&C Toolkit 2.1.2.
    If you have a CAR ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of the ECU M&C Toolkit.
    Bug IDFixed Issue
    105783Fixed the issue that the XCP Spy does not analyze the byte order.
    105788Fixed the issue that a XCP DAQ Lists does not work correctly if GET_DAQ_PROCESSOR_INFO is not implemented in the ECU.
    The following items are the IDs and titles of a subset of issues fixed between ECU M&C Toolkit 2.1.5 and ECU M&C Toolkit 2.2.
    If you have a CAR ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of the ECU M&C Toolkit.
    Bug IDFixed Issue
    281478If a LINEAR scaling was used in the COMPU_METHOD, the scaling was inverted (ax+b) but should be x/a-b.
    282606Each created DAQ list had the same number of ODTs, and each ODT had the same number of entries. This has been fixed so that a more local strategy is used, which saves a bit of ECU memory, and independent of whether one or two event channels are assigned to the DAQ lists.
    307974Fixed a LabVIEW exception when calling mcGetNames concurrently from two independent threads.
    311204Fixed the sporadic loss of data when reading DAQ-Lists over XCP on TCP/IP.
    314259Fixed a Multithreading Issue to access the same A2L file from two threads to read out Names and Properties in parallel.
    317747Fixed to read/write DTO or CRO properties for a XCP task instead of using the A2L file defaults.
    328358ECU MC Installer does not require NI RIO 3.2 during a cRIO installation.
    The following items are the IDs and titles of a subset of issues fixed between ECU M&C Toolkit 2.2 and ECU M&C Toolkit 2.2.1.
    If you have a CAR ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of the ECU M&C Toolkit.
    Bug IDFixed Issue
    361795Fixed the Remote Seedkey DLL to connect to the SeedKey Server on the host, when the SeedKey Client on the target has a static IP address assigned.
    The following items are the IDs and titles of a subset of issues fixed between ECU M&C Toolkit 2.2.1 and ECU M&C Toolkit 2.3.0.
    If you have a CAR ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of the ECU M&C Toolkit.
    Bug IDFixed Issue
    396227Fixed an issue for XCP use case where the EV_CMD_PENDING event did not restart the timeout.
    396926Fixed the A2L import to be able to read in PROTOCOL_LAYER "IF_DATA XCP" block.
    The following items are the IDs and titles of a subset of issues fixed between ECU M&C Toolkit 2.3.0 and ECU M&C Toolkit 14.0.
    If you have a CAR ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of the ECU M&C Toolkit.
    Bug IDFixed Issue
    421967Fixed an issue where an MC Stop could close the entire XNET interface.
    447300Fixed an issue where the ECU connect function sent in addition commands (Get DAQ Processor and Get DAQ List Info) using the XCP protocol.
    Back to Top

    Automating the Installation of NI Products
    You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
    If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
    For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
    • For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
    • For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
    • To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
    How to Use NI Software with Microsoft Windows 8.x
    When you install National Instruments software on Microsoft Windows 8.x, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher.
    Using NI Launcher
    NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile in the Apps view. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.
    Note  NI MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8.x. You can launch NI MAX either from the Apps view or from within NI Launcher.
    Pinning Frequently Used Applications
    For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:
    Current ApplicationIcon LocationPin to Action
    Windows 8.x DesktopDesktop TaskbarRight-click application and select Pin to Taskbar
    Windows 8.x DesktopStart screenRight-click application and select Pin to Start
    Windows 8.x Start screenDesktop TaskbarRight-click application and select Pin to taskbar from the menu bar on the bottom of the screen
    Finding All Programs
    If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files from the Apps view. To get to the Apps view, right-click anywhere on the Start screen and select All apps (Windows 8) or click the down arrow on the bottom left of the screen (Windows 8.1).
    For more information about NI support for Windows 8.x, visit ni.com/windows8.
    NI ECU M&C Toolkit Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016
    The National Instruments ECU M&C Toolkit will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of the ECU M&C Toolkit that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
    ProductInfo Code
    NI LabVIEWlifecycle
    NI LabWindows™/CVI™cvi_lifecycle
    NI Measurement Studiomstudiolifecycle
    NI TestStandtslcp
    NI DIAdemddlcp
    NI SignalExpressselcp
    NI VeriStandnivslifecycle

    Legal Information
    Copyright
    © 2007–2014 National Instruments. All rights reserved.
    Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
    National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
    End-User License Agreements and Third-Party Legal Notices
    You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
    • Notices are located in the \_Legal Information and directories.
    • EULAs are located in the \Shared\MDF\Legal\license directory.
    • Review \_Legal Information.txt for information on including legal information in installers built with NI products.
    U.S. Government Restricted Rights
    If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
    IVI Foundation Copyright Notice
    Content from the IVI specifications reproduced with permission from the IVI Foundation.
    The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
    Trademarks
    Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
    Patents

    For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW HALCON图像处理入门教程(第二版)
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程11种全套
    《LabVIEW Vision函数实例详解》教程-NI Vision所有函数使用方法介绍,基于NI VISION2020,兼容VDM21/22/23
    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|石鑫华视觉论坛 |网站地图

    GMT+8, 2024-3-29 19:57

    Powered by Discuz! X3.4

    © 2001-2024 Discuz! Team.

    快速回复 返回顶部 返回列表