NI IVI Compliance Package 4.4 Win32/64Eng NI IVI合规软件包ICP4.4下载

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI IVI Compliance Package 4.4 Win32/64Eng NI IVI合规软件包ICP4.4下载

IVI合规软件包
IVI Compliance Package包含IVI类驱动程序和支持库，用于开发和利用基于IVI互换性的应用程序。
IVI Compliance Package包含了IVI类驱动程序、仿真驱动程序和基于IVI的NI编程环境的应用案例。IVI Compliance Package基于IVI Foundation制定的最新仪器编程规范，并遵守该规范。IVI Compliance Package中的IVI类驱动程序可与专门IVI专用的驱动程序配合使用。

Win32/64Eng
4.4
文件大小: 158776692 字节 (151.42 MB)
修改日期: 2019-06-25 02:45
MD5: 32fca9244ba776971e5377921bdd72de
SHA1: 527d3632a96844998e1c42d5248662ce9028ed4d
SHA256: 13d8993bd1eb000d9136954578c19cc9086da6222966f957cd0ddfbc868f0a26
CRC32: 8e8f9b4a

百度网盘和NI官方下载地址：
ICP4.4.txt (586 Bytes, 下载次数: 0, 售价: 10 元)

2020-12-21 23:40 上传

点击文件名下载附件

NI IVI Compliance Package 4.4.0Readme File

IVI Compliance Package (ICP) 4.4 is an update release of IVI Compliance Package 4.3. This release includes the following new features and bug fixes:

• Adds support for the IviACPwr class (CARs 254373, 25374, 256322)
• Adds IVI-COM adapter support for the IviACPwr class (CAR 254370)
• Includes IVI Shared Components 2.2.1 (CAR 254400)
• Supports NI Update Service 2.0 (CAR 91206)
  

Refer to the IVI Compliance Package Release Notes, Version 4.4, for general information about this product.

Contents

System Requirements

Availablility/Installation

Known Incompatibilities

Installed Components

Uninstall Considerations

Known Issues

System Requirements

This installation requires one of the following Microsoft operating systems:

• Windows 7 (32-bit or 64-bit), including Starter Edition (32-bit)
• Windows Vista (32-bit or 64-bit)
• Windows XP Service Pack 2 or later
• Windows Server 2008 R2 (64-bit)
• Windows Server 2003 R2 (32-bit)
  

Availability/Installation

IVI Compliance Package is included in the National Instruments Device Drivers media. A stand-alone version is available on ni.com.

Before installing IVI Compliance Package 4.4, consider the following issues:

• If you plan to use IVI Compliance Package 4.4 with LabVIEW, and/or LabWindows/CVI, make sure that you have already installed LabVIEW version 8.6 or later, and/or LabWindows/CVI version 7.0 or later.
• For compatibility reasons, the IVI Compliance Package 4.4 installation process enables write permissions for the IVI Standard Root directories (defaults: Program Files\IVI Foundation\IVI and Program Files(x86)\IVI Foundation\IVI) on Windows Vista and Windows 7 systems.
• National Instruments recommends that you close all other applications before you install IVI Compliance Package 4.4.
  

To install the stand-alone, Web-only IVI Compliance Package 4.4 version, complete the following steps:

• Download the IVI Compliance Package 4.4 self-extracting archive from http://www.ni.com/downloads by navigating through the Drivers and Updates link.
• Double-click the self-extracting archive to launch the installer.
• Click OK to begin installation.
• Follow the directions that appear on the screen.
  

Known Incompatibilities

• As of IVI Compliance Package 3.1, the IVI Compliance Package distribution no longer includes LabWindows/CVI 6.0 support. Please refer to the Using LabWindows/CVI 6.0 With ICP 3.1 document for details.
• The IVI Specific Driver Test Suite in LabWindows/CVI 2009 requires ICP 4.1 or later.
• The IVI Specific Driver Test Suite in LabWindows/CVI 2010 SP1 or later requires ICP 4.4.
  

Installed Components

IVI Compliance Package 4.4 installs the following components:

• IVI class drivers
• IVI class simulation drivers
• IVI class driver LabWindows/CVI support
• IVI class driver wrappers for LabVIEW 8.6, 2009, 2010, and 2011
• IVI class driver examples for LabWindows/CVI, LabVIEW, and Measurement Studio
• IVI-COM adapters (32-bit only)
• IVI Shared Components, version 2.2.1
• IVI configuration plug-in for Measurement & Automation Explorer (MAX) 4.2.1 and later
• Online help
  

Note: The IVI Compliance Package 4.4 stand-alone, web-only distribution does not install NI I/O Trace (formerly known as NI-Spy) or MAX. You can install NI I/O Trace and MAX using several other National Instruments products, including the NI Device Drivers media.

Note: You must have MAX 4.2.1 or later installed to use the IVI Configuration utility in MAX.

Note: The installation directory for LabWindows/CVI IVI Class examples and IVI Class Simulation drivers has been changed. The new installation directory is \Documents\National Instruments\CVI\Samples\IVI directory.

Note: IVI Compliance Package 4.4 includes IVI-COM adapters which enable users to use IVI-C and IVI-COM specific drivers interchangeably in the same 32-bit application. For more information on IVI-COM adapters, refer to the IVI-C Class Driver Support for IVI-COM Specific Drivers document.

Uninstall Considerations

Complete the following steps to uninstall IVI Compliance Package 4.4:

• Select Start»Settings»Control Panel»Add or Remove Programs.
• Select National Instruments Software and click Change/Remove.
• Select NI IVI Compliance Package 4.4 and click Remove.
  

Note: After you uninstall IVI Compliance Package 4.4, the IVI Shared Components remain on the system. Complete the following steps to uninstall the IVI Shared Components:

• Select Start»Settings»Control Panel»Add or Remove Programs.
• Select IVI Shared Components and click Change/Remove.
  

Note: If you installed IVI Compliance Package 4.4 as part of another distribution that depends on IVI Compliance Package 4.4, you cannot uninstall IVI Compliance Package 4.4 without uninstalling the dependent product.

Known Issues

• When installing a user-built distribution configured for distribution media smaller than 200MB that includes a Modular Instruments Run-Time distribution, an installation error might occur. Please refer to KnowledgeBase 5CT96RW1: NI IVI Engine Installation Failure When Included in User-built Distribution for more information.
• If IVI Shared Components 2.2.1 or later is already installed when the ICP 4.4 installer is run, the IVI Shared Components feature(s) in the feature tree will not be displayed.
• Because it has a ViInt64 attribute, the IviDigitizer Class Driver function panel file is in the CVI 8.5 format, which is incompatible with LabWindows/CVI versions prior to 8.5. Due to a known issue in LabWindows/CVI 8.5, the Get/Set/Check Attribute function panels do not display the enumerated values in the "Attribute Value" field when the FP format is 8.5. To enter a value manually, you may press "Ctrl+T". Because of this known issue, CVI 9.0.1 or later is recommended for use with the IviDigitizer FP file.
• National Instruments IVI libraries, tools, and utilities support only single-byte character strings. You cannot use multi-byte characters, such as those commonly used in Chinese, Japanese, and Korean operating systems. Only single-byte characters, such as ASCII characters, may be passed to IVI function calls, used to set directory paths, and used to create entries in the MAX IVI Configuration Utility.
• NI-Spy is now known as NI I/O Trace. Images in the National Instruments IVI Driver Help continue to reflect the NI-Spy name. However, the general functionality depicted in the images remains the same.
  

---

Important Information

Copyright

© Copyright 1999–2011. National Instruments Corporation. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

Trademarks

CVI™, IVI™, LabVIEW™, Measurement Studio™, National Instruments™, NI™, ni.com™, NI-DMM™, NI-FGEN™, and TestStand™ are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks. The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.