机器视觉论坛VISIONBBS_视觉之家VISIONHOME微信公众号:石鑫华视觉网

 找回密码
 注册会员
查看: 235|回复: 0

[NI驱动软件] NI FlexRIO 15.6 Driver Windows32/64Eng NI-FlexRIO设备驱动程序15.6

[复制链接]
  • TA的每日心情
    难过
    昨天 10:00
  • 签到天数: 2253 天

    连续签到: 3 天

    [LV.Master]2000FPS

    发表于 2020-12-28 23:37:27 | 显示全部楼层 |阅读模式

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有帐号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件模块工具包驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Acvivator来激活,以下链接可下载:
    NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
    http://visionbbs.com/thread-490-1-1.html

    视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
    文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
    http://visionbbs.com/thread-26524-1-1.html

    NI FlexRIO 15.6 Driver Windows32/64Eng NI-FlexRIO设备驱动程序15.6

    FlexRIO
    FlexRIO驱动程序为使用NI FlexRIO设备的客户提供支持。
    FlexRIO驱动是用于支持FlexRIO设备的NI仪器驱动。该驱动为基于集成I/O和模块化I/O的FlexRIO设备提供硬件支持,包括用于FlexRIO的PXI FPGA模块以及FlexRIO的各种适配器模块。对于基于集成I/O的FlexRIO设备,FlexRIO驱动还提供用于数据流传输的API以及NI-TClk同步支持。

    Win32/64Eng
    15.6
    文件名: FlexRIO\FlexRIO1560.zip
    文件大小: 3407584649 字节 (3.17 GB)
    修改日期: 2016-05-27 22:21
    MD5: e7433c5757636b08753151d1806f7d9a(官方正确)
    SHA1: da3053f4225dd0136bb33ae8ecbefd438e6603f9
    SHA256: a8b088bb795d5edc0d519a353152e735fd4283359797d313f587927fe60915d7
    CRC32: aed68901

    百度网盘与NI官方下载地址:
    FlixeRIO15.6.txt (611 Bytes, 下载次数: 1, 售价: 10 快钱)

    FlexRIO™ Support 15.6 Readme
    April 2016
    This file contains important information about FlexRIO Support 15.6, including installation instructions, new features, and legal information.
    New Features
    Supported Hardware
    System Requirements
    Supported Software
    Application Development Environments (ADEs)
    Product Security and Critical Updates
    Driver Version Naming Changes
    Installing FlexRIO 15.6
    Uninstalling/Modifying FlexRIO 15.6
    Finding Examples
    Automating the Installation of NI Products
    How to Use NI Software with Microsoft Windows 8.1
    FlexRIO Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016
    Documentation
    Legal Information

    New Features
    FlexRIO Support 15.6 includes the following new features.
    • Support for the following FlexRIO adapter modules:
      • NI 5783
      • NI 6589

    FlexRIO Support 15.5 includes the following new features.
    • Support for LabVIEW 2015 SP1
    • Bug fixes and improvements
    • FlexRIO Adapter Module Support is deprecated and its functionality is combined with the FlexRIO driver as of FlexRIO Support 15.6
    FlexRIO Support 15.1.1 includes the following new features.
    • 10 GbE example support for NI-793xR hardware devices
    • Support for the following FlexRIO adapter modules:
      • NI 5751B
      • NI 5752B
      • NI 6585B

    FlexRIO Support 15.1 includes the following new features.
    • LabVIEW 2015 support for the following hardware devices:
      • NI-7931R
      • NI-7932R
      • NI-7935R
    Supported Hardware
    FlexRIO 15.6 software supports the following FlexRIO modules:
    Controllers for FlexRIO
    • NI-7931R
    • NI-7932R
    • NI-7935R
    FlexRIO FPGA Modules
    • NI PXI-7951R
    • NI PXI-7952R
    • NI PXI-7953R
    • NI PXI-7954R
    • NI PXIe-7961R
    • NI PXIe-7962R
    • NI PXIe-7965R
    • NI PXIe-7966R
    • NI PXIe-7971R
    • NI PXIe-7972R
    • NI PXIe-7975R
    • NI PXIe-7976R
    FlexRIO Adapter Modules1
    • NI 5731
    • NI 5732
    • NI 5733
    • NI 5734
    • NI 5741
    • NI 5742
    • NI 5751/5751B
    • NI 5752/5752B
    • NI 5761
    • NI 5762
    • NI 5771
    • NI 5772
    • NI 5781
    • NI 5782
    • NI 5783
    • NI 5791
    • NI 5792
    • NI 5793
    • NI 6581/6581B
    • NI 6583
    • NI 6584
    • NI 6585/6585B
    • NI 6587
    • NI 6589
    1 FlexRIO adapter modules are supported only in LabVIEW 2014 and LabVIEW 2015.
    Device-specific information about these modules is included in the FlexRIO Help.
    System RequirementsSupported Operating Systems
    FlexRIO 15.6 supports the following operating systems:

    Operating System64-bit32-bit
    Windows 10
    ✓
    ✓
    Windows 8.1
    ✓
    ✓
    Windows 7 Service Pack 1
    ✓
    ✓
    Windows Vista Business
    ✓
    ✓
    Windows XP Professional SP2 or higher
    ✓
    Windows Server 2008 R2
    ✓
    Windows Server 2003 R21
    ✓
    Red Hat Enterprise Linux 7.x
    ✓
    Red Hat Enterprise Linux 6.x
    ✓
    ✓
    Scientific Linux 6.x
    ✓
    ✓
    CentOS 7
    ✓
    1 Support for Windows Server 2003 R2 may require disabling physical address extensions.
    Note: FlexRIO 15.6 does not support Windows Server non-R2 editions.
    NI recommends that you have the most recent service pack for your operating system instalLED.
    Supported Real-Time Operating Environments
    FlexRIO 15.6 supports the following real-time operating environments:
    • LabVIEW Real-Time Module
    Minimum System Requirements
    • Processor—Pentium III/Celeron 600 MHz or equivalent
    • RAM—
      • Windows XP: 128 MB
      • Windows 8.1/7/Vista: 512 MB
    • Microsoft Internet Explorer 5.5 or later
    • A screen resolution of 800 x 600 with 256 colors
    • Windows 8.1/7/Vista/XP, with all available critical updates and service packs
    Recommended System
    • Processor—Pentium 4 or equivalent
    • RAM—
      • Windows XP: 256 MB
      • Windows 8.1/7/Vista: 1 GB
    • A screen resolution of 1,024 x 768
    • Windows 8.1/7/Vista/XP, with all available critical updates and service packs
    Supported SoftwareLabVIEW 2015 SP1 (32-bit and 64-bit)LabVIEW 2014 SP1 (32-bit and 64-bit)LabVIEW 2013 SP1 (32-bit and 64-bit)LabVIEW 2012 SP1 (32-bit and 64-bit)Application Development Environments (ADEs)
    Note: You should install ADEs before installing FlexRIO Support 15.6. To add support for ADEs installed after installing FlexRIO Support 15.6, modify your FlexRIO 15.6 installation or launch the FlexRIO 15.6 installer again.
    • LabVIEW 2012 SP1 (32-bit and 64-bit), 2013 SP1 (32-bit and 64-bit), 2014 SP1 (32-bit and 64-bit), and 2015 SP1 (32-bit and 64-bit)
    • LabVIEW Real-Time Module 2012 SP1, 2013 SP1, 2014 SP1, and 2015 SP1
    • LabVIEW FPGA Module 2012 SP1, 2013 SP1, 2014 SP1, and 2015 SP1
    Product Security and Critical Updates
    Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.
    Driver Version Naming Changes
    FlexRIO Support versions are aligned with the versions of major NI application software products. This alignment gives you information about the year the driver was released and the most recent software version the driver was designed to work with. Driver versions start with a two-digit year indicator: <;ProductName><Year-BasedVersion>. For example, FlexRIO 15.0 is the version released with LabVIEW 2015.
    Installing FlexRIO 15.6
    Note  FlexRIO Support 15.6 installs with FlexRIO Adapter Module Support 15.1.
    Complete the following steps to install FlexRIO 15.6 for use with LabVIEW:
    • Install LabVIEW.
    • (Optional) Install LabVIEW Real-Time.
    • Install LabVIEW FPGA .
      Note: In the LabVIEW FPGA installation menu, you must also install the Compilation Tools for FPGA Devices other than Virtex-II to use these examples.
    • Install FlexRIO 15.6.
    Note: Visit ni.com/info and enter rdsoftwareversion as the Info Code for more information about which minimum software versions you need for your device.
    Uninstalling/Modifying FlexRIO 15.6
    For Windows XP, complete the following steps:
    • Launch the Control Panel by selecting Start&#187;Control Panel.
    • Double-click Add or Remove Programs.
    • Select National Instruments Software.
    • Click Change/Remove.
    • Select FlexRIO 15.6 from the dialog box that appears.
    • Click Remove to uninstall the product; click Modify to change the components that are installed.
    For Windows 7 Service Pack 1/Vista, complete the following steps:
    • Launch the Control Panel by selecting Start&#187;Control Panel.
    • Double-click Programs and Features.
    • Select National Instruments Software.
    • Click the Uninstall/Change button.
    • Select FlexRIO 15.6 from the dialog box that appears.
    • Click Remove to uninstall the product; click Modify to change the components that are installed.
    For Windows 8.1, complete the following steps:
    • Right-click on the Start screen.
    • Select All apps and launch the Control Panel.
    • Select Programs&#187;Programs and Features.
    • Select National Instruments Software
    • Click the Uninstall button.
    • Select FlexRIO 15.6 from the dialog box that appears.
    • Click Remove to uninstall the product; click Modify to change the components that are installed.
    Automating the Installation of NI Products
    You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
    If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
    For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
    • For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
    • For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.
    • To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
    Finding Examples
    To access FlexRIO examples using the NI Example Finder, open LabVIEW and select Help&#187;Find Examples, then select Hardware Input and Output&#187;FlexRIO.
    How to Use NI Software with Microsoft Windows 8.1
    When you install National Instruments software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher.
    Using NI Launcher
    NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile in the Apps view. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.
    Note  NI MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8.x. You can launch NI MAX either from the Apps view or from within NI Launcher.
    Pinning Frequently Used Applications
    For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:
    Current ApplicationIcon LocationPin to Action
    Windows 8.1 DesktopDesktop TaskbarRight-click application and select Pin to Taskbar
    Windows 8.1 DesktopStart screenRight-click application and select Pin to Start
    Windows 8.1 Start screenDesktop TaskbarRight-click application and select Pin to taskbar from the menu bar on the bottom of the screen
    Finding All Programs
    If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files from the Apps view. To get to the Apps view, right-click anywhere on the Start screen and click the down arrow on the bottom left of the screen.
    For more information about NI support for Windows 8.1, visit ni.com/windows8.
    FlexRIO Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016
    FlexRIO will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of FlexRIO that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
    ProductInfo Code
    NI LabVIEWlifecycle
    NI LabWindows&#8482;/CVI&#8482;cvi_lifecycle
    NI Measurement Studiomstudiolifecycle
    NI TestStandtslcp
    NI DIAdemddlcp
    NI SignalExpressselcp
    NI VeriStandnivslifecycle
    Documentation
    The product documentation is available at Start&#187;All Programs&#187;National Instruments&#187;NI FlexRIO. Visit ni.com/manuals for the latest versions of product documentation.
    To view these documents, you need to have Adobe Acrobat Reader installed. You can install the viewer from www.adobe.com/acrobat.
    The documentation set is composed of the following documents:
    DocumentDescription
    FlexRIO HelpContains information about FlexRIO device support. This book also provides instructions for using LabVIEW and the LabVIEW FPGA Module with FlexRIO devices.
    NI-7931R/7932R/7935R User ManualContains information about how to develop applications for your NI-793xR module.
    FlexRIO Adapter Module Development Kit User ManualContains information about how to develop custom adapter modules for use with your FlexRIO FPGA module.
    Getting started guide for your FlexRIO FPGA moduleContains installation instructions and configuration information for your FlexRIO FPGA module.
    Specifications document for your FlexRIO FPGA moduleContains specifications for your FlexRIO FPGA module.
    Getting started guide for your FlexRIO adapter moduleContains installation instructions and configuration information for your FlexRIO adapter module.
    Specifications document for your FlexRIO adapter moduleContains specifications for your FlexRIO adapter module.
    FlexRIO Support 15.6 Readme (this document)Contains information about supported hardware and operating systems, new features, fixed issues, and legal notices.
    Refer to ni.com/flexrio for additional FlexRIO product support and information.

    Legal Information
    Copyright
    &#169;2008–2016 National Instruments. All rights reserved.
    Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
    National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
    End-User License Agreements and Third-Party Legal Notices
    You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
    • Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
    • EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
    • Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
    U.S. Government Restricted Rights
    If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
    IVI Foundation Copyright Notice
    Content from the IVI specifications reproduced with permission from the IVI Foundation.
    The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
    Trademarks
    Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
    Patents
    For patents covering the National Instruments products/technology, refer to the appropriate location: Help&#187;Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
    374872H-01
    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|机器视觉论坛VISIONBBS.COM|视觉之家VISIONHOME.CN|东莞市华动智能科技有限公司 ( 粤ICP备17078359号-2 )|网站地图

    GMT+8, 2021-7-29 10:45

    Powered by shixinhua.com X3.4

    © 2009-2021 VISIONBBS.COM 浏览量:

    快速回复 返回顶部 返回列表