机器视觉论坛VISIONBBS_视觉之家VISIONHOME微信公众号:石鑫华视觉网

 找回密码
 注册会员
查看: 240|回复: 0

[NI驱动软件] NI FlexRIO 19.6 Driver Windows32/64Eng NI-FlexRIO设备驱动程序19.6

[复制链接]
  • TA的每日心情
    难过
    13 小时前
  • 签到天数: 2251 天

    连续签到: 1 天

    [LV.Master]2000FPS

    发表于 2020-12-28 23:51:11 | 显示全部楼层 |阅读模式

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有帐号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件模块工具包驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Acvivator来激活,以下链接可下载:
    NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
    http://visionbbs.com/thread-490-1-1.html

    视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
    文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
    http://visionbbs.com/thread-26524-1-1.html

    NI FlexRIO 19.6 Driver Windows32/64Eng NI-FlexRIO设备驱动程序19.6

    FlexRIO
    FlexRIO驱动程序为使用NI FlexRIO设备的客户提供支持。
    FlexRIO驱动是用于支持FlexRIO设备的NI仪器驱动。该驱动为基于集成I/O和模块化I/O的FlexRIO设备提供硬件支持,包括用于FlexRIO的PXI FPGA模块以及FlexRIO的各种适配器模块。对于基于集成I/O的FlexRIO设备,FlexRIO驱动还提供用于数据流传输的API以及NI-TClk同步支持。

    Win32/64Eng
    19.6
    文件名: FlexRIO\ni-flexrio_19.6.0.49152-0+f0_offline.iso
    文件大小: 9672947712 字节 (9.01 GB)
    修改日期: 2019-12-13 05:39
    MD5: 2ad6214155433a2e605189a7053dcef8(官方正确)
    SHA1: 88a502f325d14d59fd305a2b49f5100b478072a9
    SHA256: c86bd8ccc747d8665857aaf86212a65f1bba44b7daf9a0fbce5ce176151016f5
    CRC32: b709100b

    百度网盘与NI官方下载地址:
    FlixeRIO19.6.txt (663 Bytes, 下载次数: 0, 售价: 10 快钱)

    FlexRIO™ 19.6 Readme
    November 2019
    Thank you for using FlexRIO 19.6. This file contains important information about FlexRIO 19.6 and is organized into the following sections.
    System Requirements
    Application Development Environments (ADEs)
    New Features
    Supported Hardware
    InstalLED Software, Documentation, and Examples
    Documentation
    Finding Examples
    Product Security and Critical Updates
    Driver Version Naming Changes
    Installing FlexRIO 19.6
    IVI Compliance Package Functionality
    Uninstalling/Modifying FlexRIO 19.6
    Known Issues and Bug Fixes
    Automating the Installation of NI Products
    Using NI Software with Microsoft Windows 10
    Using NI Software with Microsoft Windows 8.1
    Legal Information

    System RequirementsSupported Operating Systems
    FlexRIO 19.6 supports the following operating systems:
    Operating System64-bit32-bit
    Windows 10 1
    ✓
    ✓
    Windows 8.1 1
    ✓
    ✓
    Windows 7 Service Pack 1
    ✓
    ✓
    Windows Server 2008 R2 2
    ✓
    Red Hat Enterprise Linux 7.x
    ✓
    Red Hat Enterprise Linux 6.x
    ✓
    Scientific Linux 6.x
    ✓
    CentOS 7
    ✓
    Note In July 2016, NI dropped support for Windows Vista, Windows XP, Windows Server 2003, and installations of Windows 7 without any service packs. FlexRIO 19.6 will not install or run on an unsupported OS. You cannot deploy or distribute applications that use FlexRIO 19.6 to an unsupported OS. Additionally, after installing FlexRIO 19.6, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.
    For more information about the changes to our OS support for 2016, refer to KB 79UC78LS, Why Does my LabVIEW, LabWindows/CVI, Measurement Studio, or TestStand Built Installer Fail on Windows XP/Vista and Server 2003?.
    1 NI software installs VC2015 Runtime and .NET 4.6.1. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.
    2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.
    Note: FlexRIO 19.6 does not support Windows Server non-R2 editions.
    NI recommends that you have the most recent service pack for your operating system installed.
    Supported Real-Time Operating Environments
    FlexRIO 19.6 supports the following real-time operating environments:
    • LabVIEW Real-Time Module
    Minimum System Requirements
    • Processor—1 GHz or faster 32-bit (x86) or 64-bit (x64) processor
    • RAM—1 GB RAM (32-bit) or 2 GB RAM (64-bit)
    • A screen resolution of 1,024 x 768
    • Windows 10/8.1/7, with all available critical updates and service packs
    Application Development Environments (ADEs)
    Note: You should install ADEs before installing FlexRIO 19.6. To add support for ADEs installed after installing FlexRIO 19.6, modify your FlexRIO 19.6 installation or launch the FlexRIO 19.6 installer again.
    • LabVIEW 2016, 2017 SP1, 2018, and 2019
    • LabVIEW NXG 4.0
    • LabVIEW Real-Time Module 2016, 2017, 2018, and 2019
    • LabVIEW FPGA Module 2016, 2017 SP1, 2018, and 2019
    • LabVIEW NXG FPGA Module 4.0
    Note: If you are running your application on an RT target, 128 MB of memory or more is required
    New Features
    FlexRIO 19.6 includes the following new features.
    • LabVIEW 2019 support for the PXIe-6593.
    FlexRIO 19.5 includes the following new features.
    • FlexRIO with Modular I/O support for LabVIEW NXG 4.0
    • FlexRIO with Integrated I/O support for Linux RT.
    FlexRIO 19.0 includes the following new features.
    • Support for LabVIEW 2019
    FlexRIO 18.7 includes the following new features.
    • LabVIEW 2018 support for the following hardware devices:
      • PXIe-5774
      • PCIe-5774
      • PCIe-5763
      • PCIe-5764
      • PCIe-5775
      • PCIe-5785

    FlexRIO 18.6 includes the following new features.
    • LabVIEW 2018 support for the following hardware devices:
      • PXIe-5745
      • PXIe-5775
      • PXIe-5785

    FlexRIO 18.1 includes the following new features.
    • LabVIEW 2018 and 2017 support for the following hardware devices:
      • PXIe-7911
      • PXIe-7912
      • PXIe-7915
      • PXIe-5763
      • PXIe-5764

    FlexRIO 18.0 includes the following new features.
    • Support for LabVIEW 2018
    Project export for the Vivado Design Suite—The LabVIEW 2017 FPGA Module provides an option to export FPGA VIs to the Vivado Design Suite projects. This option allows you to design the exported project and compile it into a bitfile in the Vivado Design Suite. You can then run a bitfile on an FPGA target in the FPGA Module.Supported Hardware
    FlexRIO 19.6 software supports the following FlexRIO hardware:
    FlexRIO with Integrated I/O1
    • FlexRIO High-Speed Serial Modules

      • PXIe-6593

    • FlexRIO Coprocessor Modules

      • PXIe-7911
      • PXIe-7912
      • PXIe-7915
    • FlexRIO Digitizer Modules

      • PXIe-5763
      • PXIe-5764
      • PXIe-5775
      • PXIe-5774
      • PCIe-5774
      • PCIe-5763
      • PCIe-5764
      • PCIe-5775
    • FlexRIO Signal Generator Modules

      • PXIe-5745
    • FlexRIO IF Transceiver Modules

      • PXIe-5785
      • PCIe-5785

    FlexRIO with Modular I/O
    • Controllers for FlexRIO

      • NI-7931R
      • NI-7932R
      • NI-7935R
    • FlexRIO FPGA Modules

      • PXI-7951R1
      • PXI-7952R1
      • PXI-7953R1
      • PXI-7954R1
      • PXIe-7961R1
      • PXIe-7962R1
      • PXIe-7965R1
      • PXIe-7966R1
      • PXIe-7971R
      • PXIe-7972R
      • PXIe-7975R
      • PXIe-7976R
    • FlexRIO Adapter Modules2

      • NI 57311
      • NI 5732
      • NI 5733
      • NI 5734
      • NI 57411
      • NI 57421
      • NI 5751/5751B
      • NI 5752/5752B1
      • NI 57531
      • NI 5761
      • NI 57621
      • NI 5771
      • NI 5772
      • NI 57811
      • NI 5782
      • NI 5783
      • NI 5791
      • NI 5792
      • NI 5793
      • NI 6581/6581B
      • NI 6583
      • NI 6584
      • NI 6585/6585B
      • NI 6587
      • NI 6589

    1 Not supported in LabVIEW NXG.
    2 FlexRIO adapter modules are supported only in LabVIEW 2017, LabVIEW 2018, LabVIEW 2019, and LabVIEW NXG.
    Device-specific information about these modules is included in the FlexRIO Help.
    Installed Software, Documentation, and Examples
    • <NIDocDir> is an alias for the following National Instruments file folder location: Users\Public\Public Documents\National Instruments
    • <IVIROOTDIR32> is an alias for the following National Instruments file folder location:
      • (32-bit) Program Files\IVI Foundation\IVI\
      • (64-bit) Program Files (x86)\IVI Foundation\IVI\
        Note$(IVIROOTDIR32) is configured as an environment variable on the target system.
        If you upgraded an installation of IVI, your files may be located in the following location:
        • (32-bit) Program Files\IVI\
        • (64-bit) Program Files (x86)\IVI\

    • <IVIROOTDIR64> is an alias for the following National Instruments file folder location:
      • (64-bit) Program Files\IVI Foundation\IVI\
        Note$(IVIROOTDIR64) is configured as an environment variable on the target system.


    Documentation
    The product documentation is available at Start&#187;All Programs&#187;National Instruments&#187;NI FlexRIO. Visit ni.com/manuals for the latest versions of product documentation.
    To view these documents, you need to have Adobe Acrobat Reader installed. You can install the viewer from www.adobe.com/reader.
    The documentation set is composed of the following documents:
    DocumentDescription
    FlexRIO HelpContains information about FlexRIO device support. This book also provides instructions for using LabVIEW and the LabVIEW FPGA Module with FlexRIO devices.
    NI-7931R/7932R/7935R User ManualContains information about how to develop applications for your NI-793xR module.
    Getting started guide for your deviceContains software and hardware installation, MAX configuration, signal connection, and troubleshooting information for your device.
    Specifications document for your deviceLists technical specifications for your device.
    FlexRIO 19.6 Readme (this document)Contains information about supported hardware and operating systems, new features, fixed issues, and legal notices.
    For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.
    To use the .NET API, you must install the the .NET class libraries or the .NET Wrapper in addition to the NI device driver. For information about versions of the .NET Framework and the drivers each supports, as well as the download location of the installer files, refer to the National Instruments .NET Driver Support document at ni.com/info and enter Info Code NETAPIdriversupport.
    Note  To view PDFs, you need to have Adobe Acrobat Reader installed. You can install the viewer from www.adobe.com/reader.
    Refer to ni.com/flexrio for additional FlexRIO product support and information.
    Finding Examples
    In LabVIEW, you can use the NI Example Finder to search or browse examples. FlexRIO examples are classified by keyword, so you can search for a particular device or measurement function. In LabVIEW, select Help&#187;Find Examples to launch the NI Example Finder. The NI Example Finder offers two ways to access all installed LabVIEW example VIs (including FlexRIO) and their descriptions:
    • Click the Browse tab to locate modulation examples by task at Hardware Input and Output&#187;FlexRIO.
    • Click the Search tab to search all installed examples by keyword. For example, search for "FlexRIO" to locate all FlexRIO examples.
    The NI Example Finder is also available in LabWindows/CVI by selecting Help&#187;Find Examples.
    Examples also are available online that demonstrate applications using FlexRIO. Refer to ni.com/examples for these examples and for more information.
    Product Security and Critical Updates
    Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.
    Driver Version Naming Changes
    FlexRIO versions are aligned with the versions of major NI application software products. This alignment gives you information about the year the driver was released and the most recent software version the driver was designed to work with. Driver versions start with a two-digit year indicator: <;ProductName><Year-BasedVersion>. For example, FlexRIO 19.6 is the version released with LabVIEW 2019.
    Installing FlexRIO 19.6
    Complete the following steps to install FlexRIO 19.6 for use with LabVIEW:
    • Install LabVIEW.
    • (Optional) Install LabVIEW Real-Time.
    • Install LabVIEW FPGA.
      Note: In the LabVIEW FPGA installation menu, you must also install the Compilation Tools for FPGA Devices other than Virtex-II to use these examples.
    • Install FlexRIO 19.6.
    Note: Visit ni.com/info and enter rdsoftwareversion as the Info Code for more information about which minimum software versions you need for your device.
    IVI Compliance Package Functionality
    FlexRIO no longer installs IVI Compliance Package. FlexRIO supports IVI configuration and runtime, but no longer supports the following features:
    • LabVIEW and CVI IVI class driver APIs for developing IVI interchangeable applications
    • IVI Class Simulation drivers
    • IVI-COM Adapters
    If you want to use the above features, you must install IVI Compliance Package separately, either from ni.com/downloads or from the NI Device Drivers 2019 DVD.
    Uninstalling/Modifying FlexRIO 19.6
    For Windows 7 Service Pack 1, complete the following steps:
    • Launch the Control Panel by selecting Start&#187;Control Panel.
    • Double-click Programs and Features.
    • Select National Instruments Software.
    • Click the Uninstall/Change button.
    • Select FlexRIO 19.6 from the dialog box that appears.
    • Click Remove to uninstall the product; click Modify to change the components that are installed.
    For Windows 8.1, complete the following steps:
    • Right-click on the Start screen.
    • Select All apps and launch the Control Panel.
    • Select Programs&#187;Programs and Features.
    • Select National Instruments Software
    • Click the Uninstall button.
    • Select FlexRIO 19.6 from the dialog box that appears.
    • Click Remove to uninstall the product; click Modify to change the components that are installed.
    Known Issues and Bug Fixes
    You can access the software and documentation known issues and bug fixes list online at ni.com/r/flexrio195ki.
    Note: FlexRIO 19.6 includes the LabVIEW 2018 FPGA Module f1 patch. Refer to Info Code FPGA2018f1 for more information.
    Automating the Installation of NI Products
    You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
    If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
    For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
    • For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
    • For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.
    • To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My NI Installer?.
    Using NI Software with Microsoft Windows 10
    Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
    Using NI Software with Microsoft Windows 8.1
    When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.

    Legal Information
    Copyright
    &#169;2008–2019 National Instruments. All rights reserved.
    Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
    NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
    End-User License Agreements and Third-Party Legal Notices
    You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
    • Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
    • EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
    • Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
    U.S. Government Restricted Rights
    If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
    IVI Foundation Copyright Notice
    Content from the IVI specifications reproduced with permission from the IVI Foundation.
    The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
    Trademarks
    Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
    Patents
    For patents covering the NI products/technology, refer to the appropriate location: Help&#187;Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
    374872V-01
    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|机器视觉论坛VISIONBBS.COM|视觉之家VISIONHOME.CN|东莞市华动智能科技有限公司 ( 粤ICP备17078359号-2 )|网站地图

    GMT+8, 2021-7-26 23:29

    Powered by shixinhua.com X3.4

    © 2009-2021 VISIONBBS.COM 浏览量:

    快速回复 返回顶部 返回列表