机器视觉论坛VISIONBBS_视觉之家VISIONHOME微信公众号:石鑫华视觉网

 找回密码
 注册会员
查看: 277|回复: 0

[NI应用软件] NI-FBUS Monitor Software 3.0.1 Win32/64Eng NI现场总线监控软件3.0.1

[复制链接]
  • TA的每日心情
    难过
    昨天 10:00
  • 签到天数: 2253 天

    连续签到: 3 天

    [LV.Master]2000FPS

    发表于 2021-1-15 23:56:45 | 显示全部楼层 |阅读模式

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有帐号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件模块工具包驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Acvivator来激活,以下链接可下载:
    NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
    http://visionbbs.com/thread-490-1-1.html

    视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
    文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
    http://visionbbs.com/thread-26524-1-1.html

    NI-FBUS Monitor Software 3.0.1 Win32/64Eng NI现场总线监控软件3.0.1

    NI-FBUS Monitor Software
    NI-FBUS Monitor Software可帮助您使用现场总线接口设备调试、监测和分析现场总线(FBUS)数据通信。
    NI-FBUS Monitor Software是一款应用软件,可用于检测通信并捕获FBUS设备之间传递的数据包。使用此软件,您可以使用现场总线接口设备来诊断H1网络通信并进行设备开发调试。您还可以解码来自FBUS的数据包,监测实时列表并执行数据包分析。该软件还提供可配置的多窗口显示。NI-FBUS Monitor软件具有可配置的多窗口显示功能,您可以过滤数据包并实时查看列表和总线统计信息。

    Win32/64Eng
    3.0.1
    文件名 NI-FBUS Monitor Software\nifbmon301.exe
    文件大小: 28964128 字节 (27.62 MB)
    修改日期: 2007-10-01 23:30
    MD5: f422bfd2080aab3f7c8d9c15900f605f
    SHA1: 5ad2db8b0c310e4e3281d59e6e066ee5d453c8e9
    SHA256: d27f9388b535ea226df1ba6c1c442a93bc11994f186ecee43fb4d1c9a847f58f
    CRC32: 67f2ba47

    百度网盘与NI官方下载地址:
    FBUS监控软件3.0.1.txt (582 Bytes, 下载次数: 0, 售价: 5 快钱)

    NI-FBUS Monitor 3.0.1 Readme
    May 2007
    The NI-FBUS Monitor 3.0.1 is an update to the NI-FBUS Monitor 3.0. This file contains the following important information that you need to understand before using the NI-FBUS Monitor.
    Supported Platforms
    Installation Requirements
    Installation Instructions
    New Features
    Accessing the Documentation
    Supported Hardware
    Resources
    Supported Platforms
    The NI-FBUS Monitor supports Windows Vista, the 32-bit version; Windows XP Service Pack 2; and Windows 2000 Service Pack 4. The NI-FBUS Monitor does not support Windows Vista x64 Edition, the 64-bit version.
    Installation Requirements
    To use the NI-FBUS Monitor, you must ensure that the computer meets the following minimum requirements:
    • Pentium III 600 MHz processor
    • 256 MB of RAM
    • 250 MB of free hard drive space
    If you want to achieve optimal performance of the NI-FBUS Monitor, National Instruments recommends the following configurations:
    • Pentium III 1.2 GHz processor
    • 512 MB of RAM
    • 400 MB of free hard drive space
    Installation Instructions
    Complete the following steps to install the NI-FBUS Monitor.
    • Log in as an administrator or as a user with administrator privileges.
    • Insert the NI-FBUS Monitor installation CD and follow the instructions that appear on the screen.

      If the installer does not launch automatically, navigate to the CD using Windows Explorer and launch the autorun.exe file from the CD.

      The interactive setup program guides you through the necessary steps to install the NI-FBUS Monitor. You can go back and change values where appropriate by clicking the Back button. You can exit the setup by clicking the Cancel button.
    • Restart the computer when the setup is complete.
    Note: Install the NI-FBUS software before you install hardware such as the PCMCIA-FBUS, PCMCIA-FBUS Series 2, and PCI-FBUS/2 cards. Refer to the Installing the Hardware section of the NI-FBUS Hardware and Software User Manual for information about installing and configuring the NI-FBUS hardware. You can access this manual by opening the NI-FBUS HW SW Manual.pdf file in the National Instruments\NI-FBUS\Manual directory.
    If you have the NI-FBUS Monitor 3.0 instalLED on the computer, you do not need to uninstall that version before installing the NI-FBUS Monitor 3.0.1. If you have the NI-FBUS Monitor 2.2 or earlier installed on the computer, you first must uninstall that previous version from the computer before installing the NI-FBUS Monitor 3.0.1.
    If you have both the NI-FBUS Software 3.2 and the NI-FBUS Monitor 3.0 installed on the same computer, you must upgrade the existing software to the NI-FBUS Configurator 3.2.1 and NI-FBUS Monitor 3.0.1.
    Complete the following steps to upgrade the existing software:
    • Uninstall the NI-FBUS Monitor 3.0.
    • Upgrade the NI-FBUS Configurator from version 3.2 to version 3.2.1.
    • Install the NI-FBUS Monitor 3.0.
    • Upgrade the NI-FBUS Monitor from version 3.0 to version 3.0.1.
    Note: If you have both the NI-FBUS Monitor and the NI-FBUS Configurator installed on the same computer, uninstalling the NI-FBUS Monitor might cause the NI-FBUS Configurator not to work properly. To ensure that the NI-FBUS Configurator works properly, you must reinstall the NI-FBUS Configurator after uninstalling the NI-FBUS Monitor.
    (Windows Vista) If you uninstalled the NI-FBUS hardware from the computer and want to reinstall the hardware, the computer might fail to find the driver files for the hardware. To resolve this problem, manually install the driver files located in the National Instruments\NI-FBUS\Staging directory.
    New Features
    The NI-FBUS Monitor 3.0.1 includes the following new features:
    • Support for Windows Vista, the 32-bit version
    • Some major inconvenience issues are fixed
    Accessing the Documentation
    Refer to the Installation Guide for NI-FBUS for information about installing the National Instruments FOUNDATION Fieldbus hardware and software. You can find this document in the NI-FBUS Monitor CD kit.
    Refer to the NI-FBUS Monitor User Manual for information about using the NI-FBUS Monitor. You can find this document by navigating to Start»All Programs»National Instruments»NI-FBUS»Manuals»NI-FBUS Monitor User Manual.
    Supported Hardware
    The NI-FBUS Monitor supports the following National Instruments hardware products:
    • PCI-FBUS/2
    • PCMCIA-FBUS
    • PCMCIA-FBUS/2
    • PCMCIA-FBUS Series 2
    • PCMCIA-FBUS/2 Series 2
    Resources
    Refer to the Fieldbus Foundation Web site for more information about FOUNDATION Fieldbus.
    Refer to the National Instruments Web site for more information about National Instruments FOUNDATION Fieldbus products.
    Send an email to fieldbus.support@ni.com for support with National Instruments FOUNDATION Fieldbus products.

    Copyright
    © 2007 National Instruments Corporation. All rights reserved.
    Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
    Trademarks
    National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.
    Other product and company names mentioned herein are trademarks or trade names of their respective companies.
    Patents
    For patents covering the National Instruments products, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your CD, or ni.com/patents.
    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|机器视觉论坛VISIONBBS.COM|视觉之家VISIONHOME.CN|东莞市华动智能科技有限公司 ( 粤ICP备17078359号-2 )|网站地图

    GMT+8, 2021-7-29 09:54

    Powered by shixinhua.com X3.4

    © 2009-2021 VISIONBBS.COM 浏览量:

    快速回复 返回顶部 返回列表