机器视觉论坛VISIONBBS_视觉之家VISIONHOME微信公众号:石鑫华视觉网

 找回密码
 注册会员
查看: 253|回复: 0

[NI驱动软件] NI-HSDIO 1.0 Driver Win32Eng NI高速数字输入输出仪器驱动程序1.0

[复制链接]
  • TA的每日心情
    无聊
    昨天 11:38
  • 签到天数: 2254 天

    连续签到: 4 天

    [LV.Master]2000FPS

    发表于 2021-1-18 23:45:33 | 显示全部楼层 |阅读模式

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有帐号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件模块工具包驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Acvivator来激活,以下链接可下载:
    NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
    http://visionbbs.com/thread-490-1-1.html

    视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
    文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
    http://visionbbs.com/thread-26524-1-1.html

    NI-HSDIO 1.0 Driver Win32Eng NI高速数字输入输出仪器驱动程序1.0

    NI-HSDIO
    NI-HSDIO为使用NI PXI数字波形仪器或数字波形设备的客户提供支持。
    NI-HSDIO是与数字波形硬件进行通信的NI仪器驱动程序,用于执行高速DIO  (HSDIO)任务。该驱动程序软件包含基于IVI准则的灵活API、完整的硬件支持文档,以及配置和测试实用程序。

    Win32Eng
    1.0
    文件名: NI-HSDIO\nihsdio10.exe
    文件大小: 429977480 字节 (410.06 MB)
    修改日期: 2018-03-27 04:25
    MD5: ccb2af7896488543eafe21e0fc333ac3(官方正确)
    SHA1: 4c29a12957a0e02dc70f77e46711c176ed425e40
    SHA256: fe0ce6024071042cf7dd820f49bc52d0a74d953f6daaa343665bbfea7ae1dc4b
    CRC32: 2efc1fb4

    百度网盘与NI官方下载地址:
    HSDIO1.0.txt (560 Bytes, 下载次数: 0, 售价: 5 快钱)

    NI-HSDIO Instrument Driver Readme
    (c) 2003 National Instruments Corporation. All rights reserved.
    Thank you for using NI-HSDIO for Windows 2000/NT 4.0/XP/Me/98. This file contains important information regarding NI-HSDIO and is organized into the following sections:
    • System Requirements
    • InstalLED File Names and Locations
    • Software Files
    • Documentation
    • Uninstalling NI-HSDIO
    • Supported Hardware
    • Known Issues

    System Requirements
    Recommended System

    • Processor: Pentium III/Celeron 600 MHz or equivalent
    • RAM: 256 MB
    • Microsoft Internet Explorer 5.5 or later
    • One of the following operating systems:
      • Windows 2000
      • Windows NT 4.0 SP6A
      • Windows XP
      • Windows Me
      • Windows 98 SE
    • One of the following application development environments (ADEs):
      • LabVIEW 7.0
      • LabWindows/CVI 6.0 or later
      • Microsoft Visual C++ (MSVC) 6.0 or later

    Installed File Names and LocationsSoftware Files
    The niHSDIO folder contains the documentation, examples, license files, and FPGA files for NI-HSDIO and the associated hardware.
    LabVIEW examples are installed in the <LabVIEW>\examples\instr\niHSDIO\ directory unless you select a different location during installation.
    C examples are installed in the <;Program Files>\IVI\Drivers\niHSDIO\Examples\c\ directory.
    The product documentation is available at Start&#187;Programs&#187;National Instruments&#187;NI-HSDIO&#187;Documentation. Visit ni.com/manuals to find the latest versions of product documentation. The documentation for NI-HSDIO and NI  Digital Waveform Generator/Analyzer modules include the following items:
    • NI Digital Waveform Generator/Analyzer Getting Started Guide–Explains how to install, configure, and test a National Instruments signal sources module to generate various waveforms.
    • NI Digital Waveform Generator/Analyzer Help–Contains instructions for opening, configuring, initiating signal generation, and closing the session. Also, contains information about programming and fundamentals.
    • NI PXI-6552/6551 Specifications–Contains specifications for the capabilities and valid operating conditions of the NI PXI-6551/6552.

    For Windows 2000/NT/XP/Me/9x, complete the following steps:
    • Launch the Control Panel by selecting Start&#187;Settings.
    • Double-click Add/Remove Programs.
    • Select National Instruments Software.
    • Click Change or Modify.
    • Select NI-HSDIO 1.0.
    • Click Uninstall.

    Caution  Several of the software packages listed above are shared with other NI software packages. If you attempt to remove a piece of software that something else is dependent on, a message launches to warn you about the software dependencies. You can choose to either uninstall all of the software or to leave the shared software installed. If you choose to uninstall the shared software, some of your other NI software may no longer function correctly.
    Supported Hardware
    Device-specific information about these modules is included in the NI Digital Waveform Generator/Analyzer Help.
    Known Issues
    Note  Review the specifications document at Start&#187;Programs&#187;National Instruments&#187;NI-HSDIO&#187;Documentation to ensure that the clock and trigger signals you connect to the instrument meet the amplitude, jitter, and duty cycle requirements of your device.
    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|机器视觉论坛VISIONBBS.COM|视觉之家VISIONHOME.CN|东莞市华动智能科技有限公司 ( 粤ICP备17078359号-2 )|网站地图

    GMT+8, 2021-7-30 03:25

    Powered by shixinhua.com X3.4

    © 2009-2021 VISIONBBS.COM 浏览量:

    快速回复 返回顶部 返回列表