NI-HSDIO 1.8.1 Driver Win32/62 Eng/Jpn NI高速数字输入输出仪器驱动程序1.8.1

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI-HSDIO 1.8.1 Driver Win32/62 Eng/Jpn NI高速数字输入输出仪器驱动程序1.8.1

NI-HSDIO
NI-HSDIO为使用NI PXI数字波形仪器或数字波形设备的客户提供支持。
NI-HSDIO是与数字波形硬件进行通信的NI仪器驱动程序，用于执行高速DIO  (HSDIO)任务。该驱动程序软件包含基于IVI准则的灵活API、完整的硬件支持文档，以及配置和测试实用程序。

Win32/64Eng/Jpn
1.8.1
文件大小: 1798775776 字节 (1.68 GB)
修改日期: 2012-04-06 00:21
MD5: 91ddf90b58a87aa35a0ebe03a85efa0d（官方正确）
SHA1: 607ecda38e1aaeb640610558dd7e854b8fc81e00
SHA256: aed4e89c8ea47b42e77bf93d97265d5d6170d06e982c9b9f053c0ab2256b94a1
CRC32: dabb8748

百度网盘与NI官方下载地址：
HSDIO1.8.1.txt (578 Bytes, 下载次数: 0, 售价: 10 元)

2021-1-19 00:10 上传

点击文件名下载附件

NI-HSDIO Instrument Driver Readme

Version 1.8.1

---

Thank you for using NI-HSDIO. This file contains important information about NI-HSDIO and is organized into the following sections:

• New Features
• Supported Hardware
• System Requirements
• Installed File Names and Locations
• Updates and Notifications
• Documentation
• Uninstalling/Modifying NI-HSDIO
• Known Issues
• Bug Fixes
• Notice Regarding Microsoft Silverlight Installation and Redistribution
  

---

New Features

NI-HSDIO 1.8 includes the following new features:

• Support for NI PXIe-6556 devices.
• Support for PPMU force and sense functionality.
  

NI-HSDIO 1.7.3 includes the following new features:

• Support for LabVIEW 2010 (32-bit) and LabVIEW 2010 (64-bit).
  

NI-HSDIO 1.7.1 includes the following new features:

• Fixed fatal issue when upgrading NI-HSDIO on Windows 7 (64-bit) and Windows Server 2008 R2.
  

NI-HSDIO 1.7 includes the following new features:

• Support for LabVIEW 2009 (64-bit)
• Support for 64-bit user mode
• Support for multibank data delay on NI 6547/6548 devices only
• Additional support for hardware comparison on NI 6547/6548 devices
• Additional support for per pin, per cycle tristate on NI 6547/6548 devices
  

NI-HSDIO 1.6.1 includes the following new features:

• Support for LabVIEW 2009 (32-bit)
  

NI-HSDIO 1.6 includes the following new features:

• Support for the NI 6544/6545/6547/6548 devices
• Added localized Japanese software and documentation
• Desktop PC support for the LabVIEW Real-Time Module
• Support for detecting NI Modular Instrument devices in LabWindowsTM/CVITM
• Support to continuously stream data while using the Pause trigger
• New source synchronous acquisition and generation examples for LabVIEW and LabWindows/CVI
• Added fetch optimizations for NI-HSDIO dynamic acquisitions
• Support for generation Stop trigger
  

Supported Hardware

The following table shows which hardware products are supported under particular operating systems.

Hardware Product	Supported Under Windows 7 (32-bit)/Vista (32-bit)/XP1	Supported Under Windows 7 (64-bit)/Vista (64-bit)
NI PXI/PCI-6541	√	√
NI PXI/PCI-6542	√	√
NI PXIe-6544	√	√
NI PXIe-6545	√	√
NI PXIe-6547	√	√
NI PXIe-6548	√	√
NI PXI/PCI-6551	√	√
NI PXI/PCI-6552	√	√
NI PXIe-6556	√	√
NI PXI/PCI-6561	√	√
NI PXI/PCI-6562	√	√
1 MXI Express and MXI-4 are supported on Windows 7/Vista/XP, but MXI-3 is supported on only Windows XP.

Note:  Device-specific information about these modules is included in the NI Digital Waveform Generator/Analyzer Help.

System RequirementsSupported Operating Systems

NI-HSDIO 1.8.1 and later supports the following operating systems:

• Windows 7 (32-bit and 64-bit)
• Windows Vista (32-bit and 64-bit)
• Windows XP Service Pack 2 (32-bit)
• Windows Server 2003 R2 (32-bit)
• Windows Server 2008 R2 (64-bit)
  

Note:  NI-HSDIO 1.8 and later does not support Windows Server non-R2 editions.

It is recommended that you have the most recent service pack for your operating system installed. Windows 2000 users must use NI-HSDIO 1.7.2 or earlier.

Supported Real-Time Operating Environments

NI-HSDIO 1.8.1 and later supports the following real-time operating environments:

• LabVIEW Real-Time Module
• LabWindows/CVI Real-Time Module
  

Minimum System Requirements

• Processor—Pentium III/Celeron 600 MHz or equivalent
• RAM—
  
  • Windows XP: 128 MB
  • Windows 7/Vista: 512 MB
    
• Microsoft Internet Explorer 5.5 or later
• A screen resolution of 800 x 600 with 256 colors
• Windows 7/Vista/XP, with all available critical updates and service packs
  

Recommended System

• Processor—Pentium 4 or equivalent
• RAM—
  
  • Windows XP: 256 MB
  • Windows 7/Vista: 1 GB
    
• A screen resolution of 1024 x 768
• Windows 7/Vista/XP, with all available critical updates and service packs
  

Application Development Environments (ADEs)

• LabVIEW  8.5.1, 8.6.1, 2009 SP1 (32-bit), 2009 SP1 (64-bit), 2010 SP1 (32-bit), or 2010 SP1 (64-bit)
• LabVIEW Real-Time Module 8.5.1, 8.6.1, 2009 SP1, or 2010 SP1
  
  • Note: Calibration of NI 6555/6556 devices is not supported on LabVIEW Real-Time Module.
    
• LabWindows™/CVI™ 8.5.1 or later
• LabWindows/CVI Real-Time Module 9.0 or later
• Microsoft Visual C++ (MSVC) 6.0 or later
  
• If you are running your application on an RT target, 128 MB of memory or more is required.
  

Installed File Names and Locations

• is an alias for the following National Instruments file folder location:
  
  • Windows XP: Documents and Settings\All Users\Shared Documents\National Instruments
  • Windows 7/Vista: Users\Public\Documents\National Instruments
    
• is an alias for the following National Instruments file folder location:
  
  • Windows 7 (32-bit)/Vista (32-bit)/XP: Program Files\IVI Foundation\IVI\
  • Windows 7 (64-bit)/Vista (64-bit): Program Files (x86)\IVI Foundation\IVI\

    NOTES:	$(IVIROOTDIR32) is configured as an environment variable on the target system.
    	If you upgraded an installation of IVI, your files may be located in the following location: Windows 7 (32-bit)/Vista (32-bit)/XP: Program Files\IVI\ Windows 7 (64-bit)/Vista (64-bit): Program Files (x86)\IVI\

    
    
• is an alias for the following National Instruments file folder location:
  
  • Windows 7 (64-bit)/Vista (64-bit): Program Files\IVI Foundation\IVI\

    NOTE:

    $(IVIROOTDIR64) is configured as an environment variable on the target system.

    
    
  
  

File Locations

Item	Installed Location on Windows 7 (32-bit)/Vista (32-bit)/XP
NI-HSDIO	\Drivers\niHSDIO
NI-HSDIO Function Panel	\Drivers\niHSDIO\niHSDIO.fp
NI-HSDIO Examples	\niHSDIO\Examples
NI-HSDIO Header files	\Include
NI-HSDIO Import Library files (32-bit)	\Lib
NI-HSDIO Import Library files (64-bit)	\Lib_x64
NI-HSDIO DLL (32-bit)	\Bin

Additional File Locations for Windows 7 (64-bit)/Vista (64-bit)

Item	Installed Location on Windows 7 (64-bit)/Vista (64-bit)
NI-HSDIO Function Panel	\Drivers\niHSDIO\niHSDIO.fp
NI-HSDIO Header files	\Include
NI-HSDIO Import Library files (64-bit)	\Lib_x64
NI-HSDIO DLL (64-bit)	\Bin

Updates and Notifications

National Instruments releases critical software updates after product release using the NI Update Service. Visit ni.com/info and enter updates to view a list of all currently available updates.

National Instruments provides notification of certain critical issues at install time. Visit ni.com/info and enter notifications to view a list of current product notifications.

Documentation

The product documentation is available at Start» Programs»National Instruments»NI-HSDIO»Documentation. Visit ni.com/manuals for the latest versions of product documentation. The documentation for NI-HSDIO and NI Digital Waveform Generator/Analyzer modules includes the following items:

• NI Digital Waveform Generator/Analyzer Getting Started Guide—Explains how to install, configure, and test a National Instruments digital waveform generator/analyzer.
• NI Digital Waveform Generator/Analyzer Help—Contains instructions for opening, configuring, initiating signal generation, and closing the session. Also, contains information about programming and fundamentals.
• Specifications document for your device—Contains specifications for the capabilities and valid operating conditions of your NI device.
  

Note  To view the specifications, you need to have Adobe Acrobat Reader installed. You can install the viewer from www.adobe.com/acrobat.

Uninstalling/Modifying the Instrument Driver

Perform the following procedure to uninstall NI-HSDIO 1.8.1:

For Windows XP, complete the following steps:

• Launch the Control Panel by selecting Start»Control Panel.
• Double-click Add or Remove Programs.
• Select National Instruments Software.
• Click Change/Remove.
• Select NI-HSDIO 1.8.1 from the dialog box that appears.
• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

For Windows 7/Vista, complete the following steps:

• Launch the Control Panel by selecting Start»Control Panel.
• Double-click Programs and Features.
• Select National Instruments Software.
• Click the Uninstall/Change button.
• Select NI-HSDIO 1.8.1 from the dialog box that appears.
• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

As part of the NI-HSDIO installation, the following software is installed. To completely remove the NI-HSDIO installation from your system, you must also remove all of the following packages:

• NI LabVIEW SignalExpress 2010
• NI IVI Compliance Package 4.2
• NI Measurement & Automation Explorer 4.7.2
• NI-DAQmx 9.1.7
• NI-VISA 5.0
• NI-SPY 2.7.2
  

Caution  Several of the software packages listed above are shared with other NI software packages. If you attempt to remove a piece of software that something else is dependent on, a message launches to warn you about the software dependencies. You can choose to either uninstall all of the software or to leave the shared software installed. If you choose to uninstall the shared software, some of your other NI software may no longer function correctly.

Note  Do not attempt to uninstall by manually deleting files.

Obsolete Properties and Attributes

The Hardware Compare Mode property and the NIHSDIO_ATTR_HWC_HARDWARE_COMPARE_MODE attribute are obsolete. They are replaced by the Supported Data States property and the NIHSDIO_ATTR_SUPPORTED_DATA_STATES attribute.

Known Issues

You can access the software and documentation known issues list online. Refer to the NI-HSDIO 1.8.1 Known Issues List at ni.com for an up-to-date list of known issues in NI-HSDIO 1.8.1.

Bug Fixes

The following items are changes in NI–HSDIO 1.8.1 from NI–HSDIO 1.7. This table is not an exhaustive list of issues fixed in the current version of NI–HSDIO.

ID	Fixed Issue
327476	Fixed an issue in which, in certain cases, the clock frequency or requested source may not be the same clock used when acquiring or generating data on NI 6545/6548 devices.
246065	Fixed an issue in which an NI-HSDIO kernel crash occurred when waking up from sleep mode.
208009	Fixed an issue in which a crash occurs when upgrading NI-HSDIO on Windows 7/Vista (64-bit).
293330	Fixed an issue in which the niHSDIO HWC Fetch Sample Errors (U32) VI was broken on LabVIEW (64-bit).
245495	Fixed an issue in which NI PXI High-Speed Digital I/O devices may fail to initialize when using an NI PXIe-8133 controller. This may manifest itself as an error when initializing a new device session or by not being properly identified in Measurement and Automation Explorer.
209053	Fixed an issue in which the installer needs to stop service nidevldu before upgrading binaries.
195356	Fixed an issue in which the Test Panel in Measurement & Automation Explorer (MAX) reported an unsupported device error when using the NI PXI-6561 hardware.
193283	Fixed an issue in which NI 6545/6548 devices may experience the internal underflow error -200316 when running scripted generation above 100 MHz with the following statements: repeat until, if else, and break. For more information, search ni.com/kb using the code 52RESNHB.
181331	Fixed an issue in which setting the data position of higher channels to Delay from Sample Clock Rising Edge caused lower channels to change from falling edge to rising edge.
183454	Removed support for round trip delay values from 22 to 24 because they are not properly supported in hardware.
176994	NI-HSDIO can now be deployed to Industrial Controller Real Time (NI 31xxRT) targets.
37746	Added shipping examples that demonstrate setting up a triggered acquisition and generation session on the same device using NI-TClk.

Notice Regarding Microsoft Silverlight Installation and RedistributionInstalling Microsoft Silverlight

Some NI components require Microsoft Silverlight. If you do not have Silverlight installed on your computer, but you do have Internet access, you can download the installer from Microsoft at http://www.microsoft.com/silverlight/. If you do not have Internet access, you can install Silverlight from this NI distribution media.

Using Microsoft Silverlight

You may not use any H.264/MPEG-4 AVC and/or VC-1 technology or codecs included in or with Microsoft Silverlight software which may be provided by NI as Third Party Software, including for the purpose of encoding or decoding video in compliance with, or making use of, the H.264/AVC visual standard or the VC-1 video standard.

Redistribution of Microsoft Silverlight

If you create and distribute software applications that contain NI components that also use Microsoft Silverlight, you may be authorized to include Silverlight in installers or on physical media as long as you comply with certain requirements. Refer to the notice.txt file in the \_Legal Information\Microsoft Silverlight 4.0 directory or the NI standard End User License Agreement (EULA) located in the \Common\MDF\EULADepot\NIReleased directory for more information.

---

Important Information

Copyright

© 2003–2011 National Instruments Corporation. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

Trademarks

CVI, National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.

The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.