机器视觉论坛VISIONBBS_视觉之家VISIONHOME微信公众号:石鑫华视觉网

 找回密码
 注册会员
查看: 354|回复: 0

[NI驱动软件] NI RF Signal Generators 16.0 Win32/64Eng NI RF信号发生器NI-RFSG16.0

[复制链接]
  • TA的每日心情

    6 小时前
  • 签到天数: 2332 天

    连续签到: 4 天

    [LV.Master]2000FPS

    发表于 2021-3-1 23:50:44 | 显示全部楼层 |阅读模式

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有帐号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件模块工具包驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Acvivator来激活,以下链接可下载:
    NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
    http://visionbbs.com/thread-490-1-1.html

    视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
    文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
    http://visionbbs.com/thread-26524-1-1.html

    NI RF Signal Generators 16.0 Win32/64Eng NI RF信号发生器NI-RFSG16.0

    NI-RFSG
    NI-RFSG为使用NI PXI RF模拟信号发生器、PXI矢量信号发生器和PXI矢量信号收发仪的RF输出的客户提供支持。
    NI-RFSG是一个NI仪器驱动程序,用于配置和操作设备硬件,进行波形编程和生成,以及使用LabVIEW VI或LabWindows/CVI函数执行基本任务。NI-RFSG为大部分RF信号发生器应用提供了基于IVI的标准功能。NI-RFSG包含了交互式软面板和示例。

    Win32/64Eng
    16.0
    文件名: NI-RFSG\NIRFSG1600.zip
    文件大小: 3527569600 字节 (3.29 GB)
    修改日期: 2016-12-15 05:10
    MD5: 13e07f218e9737d0b22acc188ac7ef68(官方正确)
    SHA1: 18b7c033795e545031b8263da5c5a5d00d7f2d6c
    SHA256: 099c1a090652929f4a3827318545d65c7e5d4efdded29450a3e98ef31574f96b
    CRC32: 040a9eee

    百度网盘与NI官方下载地址:
    RFSA16.0.txt (555 Bytes, 下载次数: 0, 售价: 5 快钱)

    NI-RFSG 16.0 Readme
    August 2016

    This file contains important information about NI-RFSG and is organized into the following sections:
    New Features
    Supported Hardware
    System Requirements
    InstalLED Software, Documentation, and Examples
    Executable
    Documentation
    Accessing VIs and Functions
    Finding Examples
    NI Software Support for Microsoft Windows 7, Windows Vista, Windows XP, and Windows Server 2003
    Product Security and Critical Updates
    Driver Version Naming Changes
    Uninstalling/Modifying NI-RFSG
    Behavior Changes
    Known Issues
    Bug Fixes
    Automating the Installation of NI Products
    Using NI Software with Microsoft Windows 10
    Using NI Software with Microsoft Windows 8.1
    Legal Information

    NI RF Signal Generators Software
    This software installation provides support for customers using NI RF signal generator hardware, as specified in the Supported Hardware section. To program your NI RF signal generator, use the NI-RFSG instrument driver or NI-RFSG Soft Front Panel (SFP).

    The getting started guide for your device provides information about how to install, configure, test, and begin using an NI RF signal generator.
    New Features
    NI-RFSG 16.0 includes the following new features:
    • Support for the NI PXIe-5840 vector signal transceiver (VST)
    • Support for LabVIEW 2016 (32- and 64-bit)
    • Improvements to the initiate performance on the NI 5644R/5645R/5646R devices
    • NI-RFSG Soft Front Panel 16.0, which includes the following new features:
      • Support for configuring I/Q impairments and external gain for NI 5644R/5645R/5646R devices
      • Support for the preceding new features listed for NI-RFSG

    NI-RFSG 15.0.3 includes the following new features:
    • Improvements to the external calibration procedure for the NI 5650/5651/5652 devices
    • NI-RFSG Soft Front Panel 15.0.3, which includes the following new features:
      • Improvements to the self-calibration procedure for the NI 5670/5671/5672 devices
      • Support for reading and downloading a single precision waveform from a TDMS file in Arb Waveform generation mode

    NI-RFSG 15.0.2 includes the following new features:
    • Improvements to the self-calibration procedure for NI 5644R/5645R/5646R devices
    • Support for Windows 10 (32- and 64-bit)
    NI-RFSG 15.0 includes the following new features:
    • Support for LabVIEW 2015 (32- and 64-bit)
    • Support removed for LabVIEW 2011
    NI-RFSG 14.5 includes the following new features:
    • Support for the NI PXIe-5654 RF signal generator
    • Support for the NI PXIe-5654 with NI PXIe-5696 amplitude extender (AE)
    • Support for LabVIEW 2014 SP1 (32- and 64-bit)
    • Support for I/Q impairments with VST devices
    • NI-RFSG Soft Front Panel 14.5, which includes the following new features:
      • Support for Arb Waveform generation mode with the NI 5644R/5645R/5646R and NI 5673E
      • Support for the preceding new features listed for NI-RFSG

    NI-RFSG 14.0 includes the following new features:
    • Support for LabVIEW 2014 (32- and 64-bit)
    • Support removed for LabVIEW 2010
    • NI-RFSG Soft Front Panel 14.0
    NI-RFSG 1.9.7 includes the following new features:
    • Support for the NI PXIe-5646R VST
    • Support for downloading a custom bitfile to a VST device
    • Support for 64-bit application software with VST devices
    • NI-RFSG Soft Front Panel 1.9.7, which includes support for the other new features in NI-RFSG 1.9.7
    Supported Hardware
    The following table shows which hardware products are supported in the NI-RFSG instrument driver and the NI-RFSG SFP. The following hardware products are supported in all operating systems listed in the Supported Operating Systems section.
    Hardware ProductNI-RFSGNI-RFSG SFP
    NI PXI-5610
    NI PXIe-5611
    NI PXIe-5644R
    NI PXIe-5645R
    NI PXIe-5646R
    NI PXI/PXIe-5650
    NI PXI/PXIe-5651
    NI PXI/PXIe-5652
    NI PXIe-5653
    NI PXIe-5654
    NI PXIe-5654 with NI PXIe-5696
    NI PXI-5670
    NI PXI-5671
    NI PXIe-5672
    NI PXIe-5673/5673E
    NI PXIe-5840
    Note  Some hardware products are not supported by the NI-DAQmx-based runtime. Visit ni.com/info and enter the Info Code rfsgdevices for more information about which NI-RFSG devices are supported by the NI-DAQmx-based runtime.
    Note  MXI Express and MXI-4 are supported on Windows 10/8.1/7.
    System RequirementsSupported Operating Systems
    NI-RFSG 16.0 and NI-RFSG Soft Front Panel 16.0 support the following operating systems:
    • Windows 10/8.11/7 SP12 (32-bit and 64-bit)
    • Windows Server 2012 R21 (64-bit)
    • Windows Server 2008 R2 SP12 (64-bit)
    1 NI software installs VC2015 Runtime and .NET 4.6.1. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.
    2 NI software is signed with a SHA-256 certificate. Windows 7 SP1 and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.
    Note  NI-RFSG 16.0 does not support Windows Server non-R2 editions.
    NI recommends that you have the most recent service pack for your operating system installed.
    Supported Real-Time Operating Environments
    NI-RFSG 16.0 supports the following real-time operating environments:
    • LabVIEW Real-Time Module
    • LabWindows™/CVI™ Real-Time Module
    Note:When using NI-RFSG with LabVIEW Real-Time Module or LabWindows/CVI Real-Time Module, the NI 5644R/5645R/5646R/5654/5654 with NI 5696 devices are not supported.

    Minimum Runtime/Deployment System
    • Processor—1 GHz or faster 32-bit (x86) or 64-bit (x64) processor
    • RAM—1 GB RAM (32-bit) or 2 GB RAM (64-bit)
      Note:Depending on the amount of data generated or processed, a larger amount of RAM may be required.
    • A screen resolution of 1,024 x 768
    • Windows 10/8.1/7, with all available critical updates and service packs
    • Guest accounts are not supported under any OS.
    Application Development Environments
    Note:You should install ADEs, such as NI LabVIEW, NI LabWindows/CVI or Microsoft Visual Studio®, before installing NI-RFSG. To add support for ADEs installed after installing NI-RFSG, modify your NI-RFSG installation or launch the NI-RFSG installer again.

    NI Application SoftwareVersions Supported by NI-RFSG
    NI LabVIEW2013 SP1, 2014 SP1, 2015 SP1, or 2016
    NI LabVIEW Real-Time Module2013 SP1, 2014 SP1, 2015 SP1, or 2016
    NI LabWindows/CVI2010 or later
    NI LabWindows/CVI Real-Time Module2010 or later
    Note:Install any toolkits or add-on software you intend to use with the NI-RFSG instrument driver after NI-RFSG installation is complete. Refer to the getting started guide for your device for more information about software and hardware installation.
    Note:MXI users must install the software included with the MXI hardware.
    Installed Software, Documentation, and ExamplesInstalled Software
    • <NIDocDir> is an alias for the following National Instruments file folder location: Users\Public\Public Documents\National Instruments
    • <IVIROOTDIR32> is an alias for the following National Instruments file folder location:
      • (32-bit) Program Files\IVI Foundation\IVI\
      • (64-bit) Program Files (x86)\IVI Foundation\IVI\
        Note$(IVIROOTDIR32) is configured as an environment variable on the target system.
        If you upgraded an installation of IVI, your files may be located in the following location:
        • (32-bit) Program Files\IVI\
        • (64-bit) Program Files (x86)\IVI\

    • <IVIROOTDIR64> is an alias for the following National Instruments file folder location:
      • (64-bit) Program Files\IVI Foundation\IVI\
        Note$(IVIROOTDIR64) is configured as an environment variable on the target system.



    File Locations
    ItemInstalled Location
    NI-RFSG<IVIROOTDIR32>\Drivers\niRFSG
    NI-RFSG Function Panel<IVIROOTDIR32>\Drivers\niRFSG\niRFSG.fp
    NI-RFSG Examples<NIDocDir>\NI-RFSG\Examples
    NI-RFSG Header files<IVIROOTDIR32>\Include
    NI-RFSG Import Library files (32-bit)<IVIROOTDIR32>\Lib
    NI-RFSG DLL (32-bit)<IVIROOTDIR32>\Bin
    NI-RFSG SFP<IVIROOTDIR32>\Drivers\niRFSG
    NI-RFSG SFP Example Waveforms<NIDocDir>\NI-RFSG Soft Front Panel\examples\Waveforms
    Additional File Locations for 64-bit Operating Systems
    ItemInstalled Location
    NI-RFSG Function Panel<IVIROOTDIR64>\Drivers\niRFSG\niRFSG.fp
    NI-RFSG Header files<IVIROOTDIR64>\Include
    NI-RFSG Import Library files (64-bit)<IVIROOTDIR64>\Lib_x64
    NI-RFSG DLL (64-bit)<IVIROOTDIR64>\Bin

    Executable
    To launch the NI-RFSG SFP, navigate to Start&#187;All Programs&#187;National Instruments&#187;NI-RFSG&#187;NI-RFSG Soft Front Panel.

    Documentation
    Documentation for NI-RFSG is located at Start&#187;All Programs&#187;National Instruments&#187;NI-RFSG&#187;Documentation. The documentation set is composed of the following documents.
    DocumentFormatDescription
    NI RF Signal Generators HelpHTML/Windows HelpContains primary help content for NI-RFSG products. The help is an HTML version of a traditional user manual that includes the following information:
    • An introduction to RF Fundamentals
    • Hardware device overviews
    • How to get started with application development
    • The NI-RFSG Soft Front Panel Help
    • A complete reference for all NI-RFSG programming VIs and functions
    Getting Started Guide for your devicePrinted and PDFContains software and hardware installation, MAX configuration, signal connection, and troubleshooting information for your device.
    Specifications for your devicePDFLists technical specifications for your device.
    Calibration Procedure for your devicePDFContains calibration instructions for your device.
    NI-RFSG ReadmeHTML (this document)Contains information about supported hardware and operating systems, new features, fixed issues, and legal notices.
    Introduction to niRFSGHTMLContains information about driver documentation, examples, connecting to your instrument, configuring instrument settings, and known issues.
    NI-RFSG IVI Compliance DocumentTXTContains information about IVI compliance.
    For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.
    To use the .NET API, you must install the the .NET class libraries or the .NET Wrapper in addition to the NI device driver. For information about versions of the .NET Framework and the drivers each supports, as well as the download location of the installer files, refer to the National Instruments .NET Driver Support document at ni.com/info and enter Info Code NETAPIdriversupport.
    Note  To view PDFs, you need to have Adobe Acrobat Reader installed. You can install the viewer from www.adobe.com/acrobat.

    Accessing VIs and Functions
    NI-RFSG VIs are available in LabVIEW from the Functions&#187;Measurement I/O&#187;NI-RFSG palette.
    NI-RFSG functions are available in LabWindows/CVI from the Instrument menu. To load the NI-RFSG function panel (.fp), select Instrument&#187;Load, and navigate to <IVIROOTDIR32>\Drivers\niRFSG\niRFSG.fp or <IVIROOTDIR64>\Drivers\niRFSG\niRFSG.fp.

    Finding Examples
    In LabVIEW, you can use the NI Example Finder to search or browse examples. NI-RFSG examples are classified by keyword, so you can search for a particular device or measurement function. In LabVIEW, select Help&#187;Find Examples to launch the NI Example Finder. The NI Example Finder offers two ways to access all installed LabVIEW example VIs (including NI-RFSG and Modulation Toolkit examples) and their descriptions:
    • Click the Browse tab to locate modulation examples by task at Hardware Input and Output&#187;Modular Instruments&#187;NI-RFSG or by directory structure at instr&#187;niRFSG.
    • Click the Search tab to search all installed examples by keyword. For example, search for "RFSG" to locate all NI RF signal generator examples.
    The NI Example Finder is also available in LabWindows/CVI by selecting Help&#187;Find Examples.
    You can also access all the installed NI-RFSG examples for LabVIEW and LabWindows/CVI at Start&#187;All Programs&#187;National Instruments&#187;NI-RFSG&#187;Examples.
    Examples are also available online that demonstrate integrating NI RF signal generators with NI RF signal analyzers and NI toolkit software including the Modulation Toolkit. Refer to ni.com/examples for these examples and for more information.
    NI-RFSG 16.0 Drops Support for Microsoft Windows 7 RTM, Windows Vista, Windows XP, and Windows Server 2003
    With this release, NI-RFSG drops support for Microsoft Windows 7 RTM (with no service pack), Windows Vista, Windows XP, and Windows Server 2003. NI-RFSG 16.0 and later will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI-RFSG 16.0 to an unsupported OS. Additionally, after installing NI-RFSG 16.0, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows&#8482;/CVI&#8482;, NI TestStand&#8482;, or Measurement Studio on an unsupported OS.
    For more information about the changes to our OS support for 2016, refer to KB 79UC78LS, Why Does my LabVIEW, LabWindows/CVI, Measurement Studio, or TestStand Built Installer Fail on Windows XP/Vista and Server 2003?.
    Product Security and Critical Updates
    Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.
    Driver Version Naming Changes
    NI-RFSG versions are now aligned with the versions of major NI application software products. This alignment gives you information about the year the driver was released and the most recent software version the driver was designed to work with. Driver versions now start with a two-digit year indicator: <;ProductName><Year-BasedVersion>. For example, NI-RFSG 14.0 is the version released with LabVIEW 2014. The last version released under the old numbering scheme is NI-RFSG 1.9.8. The first version released under the new numbering scheme is NI-RFSG 14.0.
    Uninstalling/Modifying NI-RFSG
    For Windows 7, complete the following steps:
    • Launch the Control Panel by selecting Start&#187;Control Panel.
    • Double-click Programs and Features.
    • Select National Instruments Software.
    • Click the Uninstall/Change button.
    • Select NI-RFSG 16.0 from the dialog box that appears.
    • Click Remove to uninstall the product; click Modify to change the components that are installed.
    For Windows 10/8.1, complete the following steps:
    • Right-click on the Start button.
    • Select Control Panel.
    • Select Programs&#187;Programs and Features.
    • Select National Instruments Software.
    • Click the Uninstall button.
    • Select NI-RFSG 16.0 from the dialog box that appears.
    • Click Remove to uninstall the product; click Modify to change the components that are installed.
    As part of the NI-RFSG 16.0 installation, the following software is installed. To completely remove the NI-RFSG 16.0 installation from your system, you must also remove all of the following packages:
    • NI-RFSG Runtime 16.0 for DAQmx-Based Devices
    • NI-RFSG Runtime 16.0 for NI PXIe-5654
    • NI-RFSA/NI-RFSG Runtime 16.0 for NI PXIe-5644R/5645R/5646R
    • NI-RFSA/NI-RFSG Runtime 16.0 for NI PXIe-5840
    • NI VST Runtime 16.0 for NI PXIe-5644R/5645R/5646R
    • NI VST Runtime 16.0 for NI PXIe-5840
    • NI-RFSG Soft Front Panel 16.0
    • NI-DAQmx Runtime 15.0.1 with Configuration Support
    • NI-FGEN Runtime 16.0
    • NI-RIO 16.0
    • NI IVI Compliance Package 16.0
    • NI-VISA Runtime 16.0
    • NI Measurement & Automation Explorer (MAX) 16.0
    • NI I/O Trace 16.0
    • NI System Configuration Runtime 16.0
    • NI Hierarchical Waveform Storage 16.0
    Caution:Several of the software packages listed above are shared with other NI software packages. If you attempt to remove a piece of software that something else is dependent upon, a message warns you about the software dependencies. You can choose to either uninstall all of the software or to leave the shared software installed. If you choose to uninstall the shared software, some of your other NI software may no longer function correctly.
    Note:Do not attempt to uninstall by manually deleting files.

    Behavior Changes
    NI-RFSG 15.0.3
    • Removed the reference level and resolution bandwidth outputs from niRFSG 5652 Configure Attenuator Calibration VI, which reflects changes to the NI PXIe-5650/5651/5652 Calibration Procedure (part number 373084F-01) and NI PXI-5650/5651/5652 Calibration Procedure (part number 375104F-01).
    NI-RFSG 14.5
    • When you delete a configuration list, NI-RFSG automatically resets the Active Configuration List property or NIRFSG_ATTR_ACTIVE_CONFIGURATION_LIST attribute to "" (empty string), which indicates no list is active, and the Active Configuration List Step property or NIRFSG_ATTR_ACTIVE_CONFIGURATION_LIST_STEP attribute to 0. Both properties or attributes immediately return an error if you try to set an invalid active list or active step.
    NI-RFSG 1.9
    • The NI-RFSG Soft Front Panel (SFP) replaces the MAX test panel functionality for your device. In NI-RFSG 1.8.5 and earlier, you could use the MAX test panel with LabVIEW Real-Time targets. NI-RFSG SFP 1.9.5 does not support Real-Time applications.
    • The NI-RFSG SFP 1.9.5 does not support the NI PXI-5610 with an external arbitrary waveform generator (AWG) module. In NI-RFSG 1.8.5 and earlier, the MAX test panel supported the NI PXI-5610 with an external AWG module.

    Known Issues
    You can access the software and documentation known issues list online. Refer to the following locations at ni.com for an up-to-date list of known issues in NI-RFSG 16.0 and NI-RFSG SFP 16.0.
    • NI-RFSG Known Issues
    • NI-RFSG Soft Front Panel Known Issues

    Bug FixesNI-RFSG Instrument Driver
    The following items are the IDs and titles of a subset of issues fixed between NI-RFSG instrument driver revisions. This table is not an exhaustive list of issues fixed in the current version of NI-RFSG.
    NI-RFSG 16.0
    IDFixed Issue
    560185Fixed an issue where the power level is incorrect until the amplification path is specified on the NI 5654 with NI 5696.
    570905Fixed an issue where after first commit, changes to the Waveform Repeat Count property or NIRFSG_ATTR_WAVEFORM_REPEAT_COUNT attribute and Waveform Repeat Count Is Finite property or NIRFSG_ATTR_WAVEFORM_REPEAT_COUNT_IS_FINITE attribute are ignored.
    NI-RFSG 15.0.3
    IDFixed Issue
    N/AFixed an issue where some NI 5650/5651/5652 devices fail calibration verification after calibration adjustment.
    562364Fixed an issue where incorrect power output occurred on the NI 5670/5671/5672 for signals less than 2.5 MHz during Arb Waveform generation mode with digital equalization enabled.
    NI-RFSG 14.5
    IDFixed Issue
    489122Fixed an issue where the NI 5652 appears outside of the composite device in MAX.
    NI-RFSG 14.0.1
    IDFixed Issue
    492490Fixed an issue where LabVIEW Run-Time Engine 2013 SP1 does not install with NI-RFSG.
    NI-RFSG 14.0
    IDFixed Issue
    466905Fixed an issue where set frequency and power level execution time takes longer than expected on the NI 5644R/5645R/5646R.


    NI-RFSG Soft Front Panel
    The following items are the IDs and titles of a subset of issues fixed between NI-RFSG SFP revisions. This table is not an exhaustive list of issues fixed in the current version of the NI-RFSG SFP.
    NI-RFSG SFP 16.0
    Bug IDFixed Issue
    575506Fixed an issue where changing external gain was not available for the NI 5644R/5645R/5646R.
    NI-RFSG SFP 15.0.3
    Bug IDFixed Issue
    549309Fixed an issue where incorrect power output occurred after self-calibration on the NI 5672.

    Automating the Installation of NI Products
    You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
    If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
    For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
    • For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
    • For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.
    • To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
    Using NI Software with Microsoft Windows 10
    Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
    Using NI Software with Microsoft Windows 8.1
    When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.

    Legal Information
    Copyright
    &#169; 2004–2016 National Instruments. All rights reserved.
    Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
    NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
    End-User License Agreements and Third-Party Legal Notices
    You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
    • Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
    • EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
    • Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
    U.S. Government Restricted Rights
    If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
    IVI Foundation Copyright Notice
    Content from the IVI specifications reproduced with permission from the IVI Foundation.
    The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
    Trademarks
    Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
    Patents
    For patents covering the NI products/technology, refer to the appropriate location: Help&#187;Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
    374769G-01
    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    《LabVIEW Vision函数实例详解》教程-NI Vision所有函数使用方法介绍,基于NI VISION2020,兼容VDM2021
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程10种全套
    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|机器视觉论坛VISIONBBS.COM|视觉之家VISIONHOME.CN|东莞市华动智能科技有限公司 ( 粤ICP备17078359号-2 )|网站地图

    GMT+8, 2021-10-20 15:04

    Powered by shixinhua.com X3.4

    © 2009-2021 VISIONBBS.COM 浏览量:

    快速回复 返回顶部 返回列表