机器视觉论坛VISIONBBS_视觉之家VISIONHOME微信公众号:石鑫华视觉网

 找回密码
 注册会员
查看: 309|回复: 0

[NI应用软件] NI Multisim Component Evaluator Analog Devices Edition 12.0.1 Win32 Eng/Ger/Jpn NI电路设计软件Miltisim CE ADE 12.0.1

[复制链接]
  • TA的每日心情
    奋斗
    昨天 13:41
  • 签到天数: 2339 天

    连续签到: 11 天

    [LV.Master]2000FPS

    发表于 2021-3-13 23:14:28 | 显示全部楼层 |阅读模式

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有帐号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件模块工具包驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Acvivator来激活,以下链接可下载:
    NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
    http://visionbbs.com/thread-490-1-1.html

    视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
    文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
    http://visionbbs.com/thread-26524-1-1.html

    NI Multisim Component Evaluator Analog Devices Edition 12.0.1 Win32 Eng/Ger/Jpn NI电路设计软件Miltisim CE ADE 12.0.1

    NI Multisim Component Evaluator Analog Devices Edition电路设计软件

    电路设计套件结合了Multisim和Ultiboard软件,为电路设计、仿真、验证和布局提供了一套完整的工具。
    电路设计套件为您提供了直观且经济高效的设计电路工具。您可以执行交互式SPICE仿真并无缝转换到PCB布局和布线软件。该套件专为教学、科研和设计而开发,提供了先进的仿真功能,可以让您清楚地了解电路在各种场景下的性能。

    Multisim_Component_Evaluator_Analog_Devices_Edition_12_0_1.exe
    文件名: NI_Multisim_Component_Evaluator_Analog_Devices_Edition_12_0_1.exe
    文件大小: 512785096 字节 (489.03 MB)
    修改日期: 2012-11-22 10:22
    MD5: 57e2b10ed2e7fafa35c92095421f6ea5
    SHA1: d588cb458d921092a13fef1e03c672f264f087d8
    SHA256: 001d4c574f15ddd1aecde7e08fabb90196d20b6e88028010a246369491c8bd9d
    CRC32: 81264798

    百度网盘与NI官方下载地址:
    Multisim_Component_Evaluator_Analog_Devices_Edition12.0.1.txt (705 Bytes, 下载次数: 0, 售价: 5 快钱)

    National Instruments Multisim Component Evaluator Analog Devices Edition Readme for Windows
    December 2012
    This file contains important last-minute information about Multisim Component Evaluator for Windows.
    Refer to the Multisim Tutorial chapter of the Getting Started with NI Circuit Design Suite manual for information about getting started with the component evaluator edition of Multisim. You can access this PDF from Start»All Programs»National Instruments»Multisim Component Evaluator 12.0»Analog Devices Edition»Documentation»Getting Started.
    Supported Platforms
    Known Issues
    Bug Fixes
    Database Improvements
    How to Use NI Software with Windows 8
    Supported Platforms
    Multisim Component Evaluator supports Windows XP 32-bit edition, Windows Vista 32-bit and 64-bit editions, Windows 7 32-bit and 64-bit editions, Windows 8 32-bit and 64-bit editions, Windows Server 2003 R2 (32-bit) and Windows Server 2008 R2 (64-bit). Multisim Component Evaluator does not support Windows NT/Me/98/95/2000, Windows XP x64, or the Windows Server non-R2 editions.
    Known IssuesLabVIEW
    • LabVIEW functionality (LabVIEW instruments and grapher interpolation) will not work if the installation path uses characters that are not native to the "Language for non-Unicode programs" setting, available by selecting Start»Control Panel»Regional and Language Options and selecting the Advanced tab. In the Vista OS, use the "Current language for non-Unicode programs:" setting in the Administrative tab. LabVIEW functionality works for Unicode characters that are native to this setting.
    Windows Vista
    • You cannot install Multisim Component Evaluator on Windows Vista Starter edition.
    Multisim
    • In Pentium III machines, NI Multisim cannot load LV Instruments created in NI LabVIEW 2011 and 2012; this also affects LVM and TDM sources and export. This is due to the use of SSE2 optimizations in LV Application Builder when LabVIEW components used in Multisim were compiLED. For more information, please read KB 60CCP0XL: I Get LV-related Error Messages When Opening Multisim in a Pentium III Machine.
    • Multisim leaks GDI resource handles when used over extended periods of time, eventually leading to unpredictable user interface behaviour and crashes. This is an issue with MFC applications running on Windows XP SP2 and Windows Server 2003. For more information and workarounds, refer to KB 4JREGSXL:Multisim or Ultiboard Leaking GDI Resource Handles.
    Release Notes
    • The "snippet" feature includes code from libpng 1.4.3, licensed by a third party or parties pursuant to the libpng license. For more information, refer to Notifications.pdf at ... \National Instruments\Multisim Component Evaluator 12.0\Licenses\.
    Bug Fixes
    The following is a subset of the issues fixed between Multisim Component Evaluator 12.0. and Multisim Component Evaluator 12.0.1.
    Multisim ( 33 )
    Bug IDDescription
    363133Expand/collapse tree items in Rename/Renumber dialog may crash in some cases.
    360449Power variable should not appear in the analysis variables list.
    349258Simulation throws errors found by the netlist generator after using the In Use List.
    348533Right-click does not cancel wiring unless the first junction has been placed/connected.
    348103Some long equation models may cause simulator failures.
    347337Thermal noise source doesn't accept values from the dialog.
    346778Pulse current source not generating correct output in some cases.
    343779Noise analysis is generating incorrect spice statement.
    342877New wire names are in random order when using drag drop a component to link a set of pins.
    342841Incorrect pin assignment in the NI-sbRIO-9605 and NI-sbRIO-9606 symbols.
    335504Time delayed switch gives incorrect results.
    335288Autowire component on move list box in the Global preferences allows for invalid values to be entered.
    329492Relay doesn't behave as expected in some cases.
    328669Grid does not appear in Multisim for some magnifications.
    327944Adding spaces before component names using Multisim's component search yields no results.
    326744Multi-select deleting empty rows in digital Grapher doesn't delete the selections.
    325947Deleting a wired up component causes net names to get mixed up in some cases.
    324614Aligning parts with wires sometimes aligns them to the edge of the design.
    321970F1 doesn't go to the right topic for the text block.
    321715Automatic wiring produces scrambled paths when connections are too close.
    318565Using Undo after searching the component browser will not restore the browser to the previously selected family and group.
    317110Pressing the Escape key In Component Wizard Quits Without Prompting.
    315848"Auto Resize" changes comments so that they are cut off.
    314297Short Fault does not allow more than 2 shorted connections.
    313574Digital Clock and Digital Ground do not work together in purely digital circuits.
    301516The schematic symbol for the NDS8858H is incorrect.
    296710Multisim is slow when wiring to a component with high pin count.
    274870Dummy pin names showing up for connectors.
    274775Canceling the action to create a floating wire on schematic, will leave a floating junction behind.
    274530Multisim leaves junctions behind if user cancels place wire command.
    372125Printing unsaved designs or the spreadsheet view does not work in Windows 8.
    377814Noise analysis does not appear in Analyses toolbar.
    358660Japanese installer has duplicate text in the destination directory description.
    Database Improvements
    This edition of Multisim Component Evaluator includes 80+ new Analog Devices components, including 14 new simulation models, 56 new simulation-only photodiodes (models provided by Analog Devices), and 70+ new NI components, including GPIB, M-series DAQ, and connectors.
    Refer to NI Multisim Component Evaluator Analog Devices Edition Components for a detailed list of the components included in Multisim Component Evaluator Analog Devices Edition.
    How to Use NI Software with Microsoft Windows 8
    When you install National Instruments software on Microsoft Windows 8, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products such as NI LabVIEW, and the Measurement & Automation Explorer (MAX).
    Note  Unlike previous versions of Microsoft Windows, MAX does not appear as a desktop shortcut. You can launch MAX from the Start screen.
    Pinning Frequently Used Applications
    For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:
    Current ApplicationIcon LocationPin to Action
    Windows 8 DesktopDesktop TaskbarRight-click application and select Pin to Taskbar
    Windows 8 DesktopStart screenRight-click application and select Pin to Start
    Windows 8 Start screenDesktop TaskbarRight-click application and select Pin to taskbar from the menu bar on the bottom of the screen
    Finding All Programs
    If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files by right-clicking anywhere on the Start screen and selecting All apps. A list of all installed software and related files appears, in alphabetical order by creator or type.

    Important Information
    Copyright
    © 2007–2012 National Instruments. All rights reserved.
    National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
    End-User License Agreements and Third-Party Legal Notices
    You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
    • Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
    • EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
    • Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
    Trademarks
    National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments. Electronics Workbench, Multisim and Ultiboard are trademarks of National Instruments. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.
    Other product and company names mentioned herein are trademarks or trade names of their respective companies.
    The EKV MOST model used in this software was developed, implemented and tested by the Electronics Laboratory (LEG) of the Swiss Federal Institute of Technology (EPFL).
    Patents

    For patents covering the National Instruments products/technology, refer to the appropriate location: Help&#187;Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    《LabVIEW Vision函数实例详解》教程-NI Vision所有函数使用方法介绍,基于NI VISION2020,兼容VDM2021
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程10种全套
    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|机器视觉论坛VISIONBBS.COM|视觉之家VISIONHOME.CN|东莞市华动智能科技有限公司 ( 粤ICP备17078359号-2 )|网站地图

    GMT+8, 2021-10-28 06:59

    Powered by shixinhua.com X3.4

    © 2009-2021 VISIONBBS.COM 浏览量:

    快速回复 返回顶部 返回列表