机器视觉论坛VISIONBBS_视觉之家VISIONHOME微信公众号:石鑫华视觉网

 找回密码
 注册会员
查看: 229|回复: 0

[LV工具模块] NI Software Calibration Management Toolkit 2015 Win32Eng NI软件标准管理工具包SCM2015

[复制链接]
  • TA的每日心情
    难过
    昨天 21:04
  • 签到天数: 2257 天

    连续签到: 7 天

    [LV.Master]2000FPS

    发表于 2021-3-20 23:35:38 | 显示全部楼层 |阅读模式

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有帐号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件模块工具包驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Acvivator来激活,以下链接可下载:
    NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
    http://visionbbs.com/thread-490-1-1.html

    视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
    文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
    http://visionbbs.com/thread-26524-1-1.html

    NI Software Calibration Management Toolkit 2015 Win32Eng NI软件标准管理工具包SCM2015

    2015
    文件名: SCM\NI_SCM_2015.exe
    文件大小: 367158144 字节 (350.15 MB)
    修改日期: 2015-08-26 10:05
    MD5: 9d30dcc2b0f006f567c00574ac8ba841(可秒传)
    SHA1: b795869320948a2815cbfd8c245f9ec09742ce2a
    SHA256: acc9837cc02103596e6df1a533a03a6f33a65253778d4ba263f1f0a6c75bf8ec
    CRC32: 986e9a0c

    百度网盘与NI官方下载地址:
    SCM2015.txt (592 Bytes, 下载次数: 0, 售价: 5 快钱)

    NI Software Calibration Management Toolkit Readme
    The Software Calibration Management is a LabVIEW-based calibration interface toolkit for efficiently communicating and calibrating data parameters (CalPoints) and faults (FaultPoints) between a LabVIEW target and a Windows host via Ethernet.
    Automating the Installation of NI Products
    You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
    If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
    For more information, refer to the following KnowLEDgeBase articles:
    • For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
    • For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
    • To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.


    Important Information
    Copyright
    ©2013–2014 National Instruments Corporation. All rights reserved.
    Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
    National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
    End-User License Agreements and Third-Party Legal Notices
    You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:
    • Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
    • EULAs are located in the <National Instruments>\Shared\MDF\EULAs directory.
    • Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
    Trademarks
    LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.
    Other product and company names mentioned herein are trademarks or trade names of their respective companies.
    Patents
    For patents covering the National Instruments products/technology, refer to the appropriate location: Help&#187;Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|机器视觉论坛VISIONBBS.COM|视觉之家VISIONHOME.CN|东莞市华动智能科技有限公司 ( 粤ICP备17078359号-2 )|网站地图

    GMT+8, 2021-8-2 02:24

    Powered by shixinhua.com X3.4

    © 2009-2021 VISIONBBS.COM 浏览量:

    快速回复 返回顶部 返回列表