机器视觉论坛VISIONBBS_视觉之家VISIONHOME微信公众号:石鑫华视觉网

 找回密码
 注册会员
查看: 182|回复: 0

[LabVIEW下载] NI LabVIEW 2018SP1 Pro Linux OS LV2018SP1Linux系统专业版下载

[复制链接]
  • TA的每日心情
    难过
    13 小时前
  • 签到天数: 2251 天

    连续签到: 1 天

    [LV.Master]2000FPS

    发表于 2021-5-14 17:49:48 | 显示全部楼层 |阅读模式

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有帐号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件模块工具包驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Acvivator来激活,以下链接可下载:
    NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
    http://visionbbs.com/thread-490-1-1.html

    视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
    文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
    http://visionbbs.com/thread-26524-1-1.html

    NI LabVIEW 2018SP1 Pro Linux OS LV2018SP1Linux系统专业版下载

    本文件为ISO文件,集成了LabVIEW2018SP1 Pro Linux 专业版,提取文件自NI官方的LabVIEW2018SP1-LMPro.iso(官方的是Linux与MAC合在一起的,因部分用户只需要Linux,单独提取上传,因此没有官方下载地址,只有百度网盘地址),可在Linux系统中安装使用(使用范围参考下面的Readme)。完整版与专业版比较,会少应用生成功能、VI分析器等功能,具体请查看自述文件。

    校验和:
    文件名: lv2018SP1pro-linux.iso
    文件大小: 570832896 字节 (544.39 MB)
    修改日期: 2018-09-27 11:05
    MD5: 99a9b6d647fdcb2212ac7338d63b5ca9
    SHA1: 5ff615b83a044f069c9d690676dfad28cbe1b1e2
    SHA256: 9e2651d9dea8abc9a1ada9979c4e68df50f9d6d7a5b58ff4fb34fb2f64dbf809
    CRC32: 6194ca6f

    百度网盘下载:
    请注册视觉论坛会员登陆后购买附件下载查看

    LV2018SP1ProLinux.txt (375 Bytes, 下载次数: 3, 售价: 25 快钱)

    LabVIEW 2018 Service Pack 1 Media Readme for macOS/Linux
    September 2018
    With the LabVIEW media for macOS/Linux, one installation gives you access to the LabVIEW Development System and nearly all the LabVIEW for macOS/Linux modules and toolkits. This file contains important information about the LabVIEW 2018 Service Pack 1 (SP1) media for macOS/Linux, including supported operating systems and installation instructions.
    Supported Operating Systems
    Products Included on the LabVIEW Media for macOS/Linux
    Installation Instructions
    Product Security and Critical Updates
    Accessing the Help
    Legal Information

    Supported Operating Systems
    You can run the LabVIEW for macOS/Linux installer on the following operating systems:
    • (macOS) macOS 10.12 or 10.13
    • (Linux)
      • openSUSE LEAP 15.0
      • openSUSE LEAP 42.2
      • openSUSE LEAP 42.3
      • Red Hat Enterprise Linux Desktop + Workstation 6.x
      • Red Hat Enterprise Linux Desktop + Workstation 7.x
      • CentOS 7

    Refer to the LabVIEW Readme for additional system requirements and supported operating systems for LabVIEW 2018 SP1.
    Products Included on the LabVIEW Media for macOS/Linux
    The LabVIEW media for macOS/Linux includes the following products. You can refer to the readme for each product in the Product ReadMes directory for information including system requirements, known issues, and bug fixes.
    • LabVIEW Full and Professional Development Systems
    • Control Design and Simulation Module1
    • MathScript RT Module2
    • VI Analyzer Toolkit3
    • Application Builder3
    1 The Control Design and Simulation Module does not support the System Identification VIs, System Identification Assistant, and Control Design Assistant.
    2 The MathScript RT Module does not support the libraries class of MathScript RT Module functions.
    3 The VI Analyzer Toolkit and Application Builder install with the LabVIEW Professional Development System. For the LabVIEW Full Development System, you can purchase and install the VI Analyzer Toolkit and Application Builder with their own separate media. Follow the installation instructions in this readme to install these products.
    Installation Instructions
    You can install your LabVIEW products—including the modules and toolkits—using the LabVIEW 2018 SP1 media for macOS/Linux.
    To request additional LabVIEW media, refer to the NI website.
    Installing the LabVIEW Development System
    Complete the following steps to install the LabVIEW Development System.
    (macOS)
    • Insert the LabVIEW media for macOS/Linux and open LabVIEW2018SP1-Full.dmg or LabVIEW2018SP1-Pro.dmg located under the LabVIEW/macOS directory.
    • Select Continue to run a program to determine if the LabVIEW Development System can be instalLED on your system.
    • Follow the instructions that appear on the screen to install LabVIEW.
    (Linux)
    • Log into the system as root.
    • Insert the LabVIEW media for macOS/Linux. Mount lv2018SP1full-linux.iso or lv2018SP1pro-linux.iso located under the LabVIEW/Linux directory.
      • Create the directory which is the mount point:

        # mkdir -p /mnt/lv2018SP1
      • Use the following mount command to mount the ISO file:

        # mount -o loop <path to lv2018SP1full-linux.iso or lv2018SP1pro-linux.iso> /mnt/lv2018SP1
      • Change the directory to list files stored in the ISO image:

        # cd /mnt/lv2018SP1

    • On the mounted media, to run the installation script, enter the following command:

      sh ./INSTALL

      To uninstall the LabVIEW Development System on Linux, enter the following command:

      sh ./UNINSTALL

    Installing the Control Design and Simulation Module
    Complete the following steps to install the Control Design and Simulation Module.
    (macOS)
    • Insert the LabVIEW media for macOS/Linux and double-click CD&Sim2018.iso located under the LabVIEW Add-ons/Control Design and Simulation directory.
    • Open NI LabVIEW 2018 Control Design and Simulation Module 64-bit.pkg located under the macOS directory.
    • Select Continue to run a program to determine if the Control Design and Simulation Module can be installed on your system.
    • Follow the instructions that appear on the screen and continue to the Installation Type screen.
    • In the Installation Type screen, select Change Install Location to select the location where a compatible version of LabVIEW is installed. Otherwise, the installation will not complete.
    • After you select the installation location, continue to follow the instructions that appear on the screen.
    (Linux)
    • Log into the system as root.
    • Insert the LabVIEW media for macOS/Linux. Mount CD&Sim2018.iso. Refer to the Installing the LabVIEW Development System section to mount an ISO image on Linux.
    • On the mounted media, find the Control Design and Simulation Module installer in the Linux directory.
    • To run the installation script, enter the following command:

      sh ./INSTALL

      To uninstall the Control Design and Simulation Module on Linux, enter the following command:

      sh ./UNINSTALL

    Installing the MathScript RT Module
    Complete the following steps to install the MathScript RT Module.
    (macOS)
    • Insert the LabVIEW media for macOS/Linux and double-click MathScript2018.iso located under the LabVIEW Add-ons/MathScript RT directory.
    • Open NI LabVIEW 2018 MathScript RT Module 64-bit.pkg located under the macOS directory.
    • Select Continue to run a program to determine if the MathScript RT Module can be installed on your system.
    • Follow the instructions that appear on the screen and continue to the Installation Type screen.
    • In the Installation Type screen, select Change Install Location to select the location where a compatible version of LabVIEW is installed. Otherwise, the installation will not complete.
    • After you select the installation location, continue to follow the instructions that appear on the screen.
    (Linux)
    • Log into the system as root.
    • Insert the LabVIEW media for macOS/Linux. Mount MathScript2018.iso. Refer to the Installing the LabVIEW Development System section to mount an ISO image on Linux.
    • On the mounted media, find the MathScript RT Module installer in the Linux directory.
    • To run the installation script, enter the following command:

      sh ./INSTALL

      To uninstall the MathScript RT Module on Linux, enter the following command:

      sh ./UNINSTALL

    Installing the VI Analyzer Toolkit
    The VI Analyzer Toolkit installs with the LabVIEW Professional Development System. Refer to the Installing the LabVIEW Development System section to install the LabVIEW Professional Development System.
    If you use the LabVIEW Full Development System, refer to the LabVIEW VI Analyzer Toolkit Readme to install the VI Analyzer Toolkit.
    Installing the Application Builder
    The Application Builder installs with the LabVIEW Professional Development System. Refer to the Installing the LabVIEW Development System section to install the LabVIEW Professional Development System.
    If you use the LabVIEW Full Development System, complete the following steps to install the Application Builder.
    (macOS)
    • Insert the LabVIEW Application Builder media and open LabVIEW2018SP1-AppBuilder.dmg located under the macOS directory.
    • Select Continue to run a program to determine if the Application Builder can be installed on your system.
    • Follow the instructions that appear on the screen and continue to the Installation Type screen.
    • In the Installation Type screen, select Change Install Location to select the location where a compatible version of LabVIEW is installed. Otherwise, the installation will not complete.
    • After you select the installation location, continue to follow the instructions that appear on the screen.
    (Linux)
    • Log into the system as root.
    • Insert the LabVIEW Application Builder media. Mount lv2018SP1ab-linux.iso located under the Linux directory. Refer to the Installing the LabVIEW Development System section to mount an ISO image on Linux.
    • On the mounted media, to run the installation script, enter the following command:

      sh ./INSTALL

      To uninstall the Application Builder on Linux, enter the following command:

      sh ./UNINSTALL

    Product Security and Critical Updates
    Visit ni.com/security for security information about NI products. Visit ni.com/critical-updates for information about critical updates from NI.
    Accessing the Help
    Refer to the LabVIEW Help, accessible by selecting Help&#187;LabVIEW Help from LabVIEW, for information about LabVIEW.

    Legal Information
    Copyright
    &#169; 2018 National Instruments. All rights reserved.
    Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
    NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
    End-User License Agreements and Third-Party Legal Notices
    You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
    • Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
    • EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
    • Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
    U.S. Government Restricted Rights
    If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
    IVI Foundation Copyright Notice
    Content from the IVI specifications reproduced with permission from the IVI Foundation.
    The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
    Trademarks
    Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
    Patents
    For patents covering the NI products/technology, refer to the appropriate location: Help&#187atents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|机器视觉论坛VISIONBBS.COM|视觉之家VISIONHOME.CN|东莞市华动智能科技有限公司 ( 粤ICP备17078359号-2 )|网站地图

    GMT+8, 2021-7-26 23:56

    Powered by shixinhua.com X3.4

    © 2009-2021 VISIONBBS.COM 浏览量:

    快速回复 返回顶部 返回列表