NI-SCOPE 20.7 x64Win10 32/64bitEng/Jpn NI示波器驱动程序SCOPE20.7

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI-SCOPE 20.7 x64Win10 32/64bitEng/Jpn NI示波器驱动程序SCOPE20.7

NI-SCOPE
NI-SCOPE为使用NI示波器产品的客户提供支持。
NI-SCOPE仪器驱动可帮助您进行多记录采集、连续采集、多板同步，并利用超过50个测量和分析函数以及传统示波器的功能。NI-SCOPE是一种兼容可互换虚拟仪器(IVI)的仪器驱动程序，提供了一系列操作和属性，可以执行波形或信号发生器的功能，并包含了交互式软件前面板和示例。

20.7
发布日期：
2021/4/21
包含的版本：
20.7.0
支持操作系统：
Windows 10 64-bit
Windows Server 2016 64-bit
Windows Server 2019 64-bit
语言：
英文/日语
程序位数：
32/64位
校验和：
文件大小: 4984356864 字节 (4.64 GB)
修改日期: 2021-05-13 19:18
MD5: 7d6c7ba233ccd6c505b962e997bd839e（官方正确）
SHA1: 4102b03811c9773bd5eeb0c189f57345bcd0d922
SHA256: 4061920666fe7f6e93107ed91487862af771a060d84464ab88f32151aeda0831
CRC32: 18350d3f

百度网盘与NI官方下载地址：
SCOPE20.7.txt (1.01 KB, 下载次数: 0, 售价: 10 元)

2021-6-3 10:37 上传

点击文件名下载附件

NI-SCOPE 20.7 Readme

April 2021

This file contains installation instructions and compatibility information for NI-SCOPE.

You can find more release information on ni.com.

• NI-SCOPE Release Notes: Known issues, bugs fixed since the last release, and other notes about this release
• NI-SCOPE Manuals: New features, behavior changes, and other documentation
  

If you plan to use LabVIEW NXG, refer to LabVIEW NXG Support and Considerations.

---

Overview

System Requirements

Supported Operating Systems

Application Software Support

Installation Instructions

Product Security and Critical Updates

Supported Hardware

Accessing the Help

Finding Examples

LabVIEW NXG Support and Considerations

Automating the Installation of NI Products

Using NI Software with Microsoft Windows 10

Unsupported Windows Operating Systems

Legal Information

---

Overview

NI-SCOPE is an NI instrument driver that enables you to implement multirecord acquisition, continuous acquisition, multiboard synchronization, more than 50 measurement and analysis functions, and the functionality of traditional oscilloscopes. NI-SCOPE is an interchangeable virtual instrument (IVI)–compliant instrument driver, and it features a set of operations and properties that exercise the functionality of the oscilloscope and includes an interactive soft front panel and examples.

System Requirements

NI-SCOPE 20.7 has the following requirements:

• 1 GHz or faster 32-bit (x86) or 64-bit (x64) processor
• 1 GB RAM (32-bit) or 2 GB RAM (64-bit)
• A screen resolution of 1,024 x 768
• If you are running your application on an RT target, at least 128 MB of memory
  

Supported Operating Systems

NI-SCOPE 20.7 supports the following operating systems:

• Windows 10
• Windows Server 2016
• Windows Server 2019
• NI Linux® Real-Time1
  

1 This operating system is not supported for the following features:

• Autopopulation of resource names in LabVIEW
• Test panels as accessible from Measurement & Automation Explorer (MAX)
  

NI Software Drops Support for Phar Lap ETS Real-Time Operating System in 2022

NI Software will drop support for Phar Lap ETS Real-Time Operating System starting in 2022. Versions of this product that ship after May 1, 2022 may not install or execute correctly on this operating system. For high-level information on the support roadmap for Phar Lap and its replacement, NI Linux Real-Time, please visit ni.com/r/xf35k1. To find out what hardware is supported on PXI controllers running NI Linux Real-Time, please visit ni.com/r/b7g5wi.

Note  In 2016, NI-SCOPE dropped support for Windows Vista, Windows XP, Windows Server 2003, and installations of Windows 7 without any service packs. NI-SCOPE will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI-SCOPE to an unsupported OS. Additionally, after installing NI-SCOPE 20.7, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.

For more information about the changes to our OS support for 2016, refer to Why Does My NI ADE Installer Fail on Windows XP/Vista and Windows Server 2003?.

Application Software Support

NI-SCOPE supports the following application software versions, including service packs. If you are not using NI application software, refer to Microsoft Visual Studio Support.

Application Software	Versions Supported by NI-SCOPE
LabVIEW	2017, 2018, 2019, and 2020
LabVIEW Real-Time Module1	2017, 2018, 2019, and 2020
LabVIEW NXG	5.1
LabWindows™/CVI™	2013 SP1 or later
LabWindows/CVI Real-Time Module3	2013 SP1 or later

1No support for the PXIe-5110/5111/5113, the PXIe-5163, or the PXIe-5164 and PXIe-517x reconfigurable oscilloscopes.

Microsoft Visual Studio Support

If you are using the NI-SCOPE .NET Class Library, the .NET Framework 4.0 (minimum) is required. The NI-SCOPE .NET Class Library can be used with the Visual C# or Visual Basic .NET programming languages in any Visual Studio version that can target the .NET Framework 4.0 or the .NET Framework 4.5.

To use the .NET API, you must select the .NET Framework 4.0 Languages Support or the .NET Framework 4.5 Languages Support packages in the NI-SCOPE installer to install the .NET class libraries in addition to the NI device driver. For information about versions of the .NET Framework and the drivers each supports, as well as the download location of the installer files, refer to National Instruments .NET Driver Support.

Installation Instructions

NI installs NI-SCOPE using NI Package Manager. If you do not already have NI software installed, NI-SCOPE installs NI Package Manager to handle the installation of your NI software. Visit ni.com/r/NIPMDownload to download NI Package Manager. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.

NI-SCOPE is available for download from ni.com/downloads/drivers. NI-SCOPE installs NI-DAQmx if it is not already installed or if an earlier version of NI-DAQmx is installed. NI-DAQmx support files will be installed if you have LabVIEW or LabWindows/CVI in your system. However, the only component that NI-SCOPE needs from NI-DAQmx is the device driver.

Upgrading from a Previous Version of NI-SCOPE

• From NI-SCOPE 1.0 and 1.1—NI-SCOPE does not install over NI-SCOPE 1.0 or 1.1. You must uninstall these versions of NI-SCOPE before installing a later version of NI-SCOPE.
• From NI-SCOPE 1.5 and later—NI-SCOPE automatically uninstalls any previous version that is greater or equal to 1.5. If you have modified any old examples, these will be overwritten by the new versions.
  

Uninstalling NI-SCOPE

As part of the NI-SCOPE installation, the following software is installed. To completely remove the NI-SCOPE installation from your system, you must also remove all of the following packages:

• NI-DAQmx
• NI Measurement & Automation Explorer
• NI Hierarchical Waveform Storage
• NI I/O Trace
  

Notice  Several of the software packages listed above are shared with other NI software packages. If you attempt to remove a piece of software that something else is dependent on, a message launches to warn you about the software dependencies. You can choose to either uninstall all of the software or to leave the shared software installed. If you choose to uninstall the shared software, some of your other NI software may no longer function correctly.

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.

Supported Hardware

The following table details the hardware models supported in NI-SCOPE 20.7.

Hardware Device	Supported Under Windows 10 (64-bit)1
NI-DAQmx-Based Oscilloscopes
PXI/PXIe/PCI-5105	Yes
PXI/PXIe/PCI-5114	Yes
PXI/PXIe/PCI-5122	Yes
PXI/PCI-5124	Yes
USB-5132/5133	Yes
PXI/PCI-5142	Yes
PXI/PCI-5152	Yes
PXI/PCI-5153	Yes
PXI/PCI-5154	Yes
PXIe-5160/5162	Yes
PXIe-5185/5186	Yes
PXIe-5622	Yes
PXI-5900	Yes
PXI/PCI-5922	Yes
SDI-Based Oscilloscopes
PXIe-5110	Yes
PXIe-5111	Yes
PXIe-5113	Yes
516x Oscilloscopes
PXIe-5163	Yes
PXIe-5164	Yes
517x Oscilloscopes
PXIe-5170	Yes
PXIe-5171	Yes
PXIe-5172	Yes
1When you install NI-SCOPE 20.7 and later, InstrumentStudio is installed instead of the SCOPE soft front panel. Use InstrumentStudio to monitor and control your oscilloscope.

Device-specific information about these modules is included in the NI High-Speed Digitizers Help.

Accessing the Help

• For help with the NI-SCOPE driver, refer to the NI High-Speed Digitizers Help, accessible by selecting Help»NI High-Speed Digitzers Help.
• For help with InstrumentStudio, used to configure and monitor NI-SCOPE devices, refer to the InstrumentStudio help at ni.com.
  

Finding Examples

NI-SCOPE ships with several examples for LabVIEW, LabWindows/CVI, Measurement Studio, MSVC, Visual C++, and Microsoft Visual Basic that will help you develop your software. These examples illustrate how to perform the most common operations with your hardware. To find the examples, go to Start» Programs»National Instruments»NI-SCOPE»Examples.

For LabVIEW examples, select Help»Find Examples from LabVIEW to launch the NI Example Finder. LabVIEW examples for NI-SCOPE are located in the labview\examples\instr\niScope directory. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.

LabVIEW NXG Support and Considerations

The following sections detail considerations for using LabVIEW NXG with NI-SCOPE.

LabVIEW NXG Hardware Support

The following table details the hardware models supported in NI-SCOPE with LabVIEW NXG.

[tr][/tr]

Hardware Module	Supported Under Windows 10
NI-DAQmx-Based Oscilloscopes
PXI/PXIe/PCI-5105	Yes
PXI/PXIe/PCI-5114	Yes
PXI/PXIe/PCI-5122	Yes
PXI/PCI-5124	Yes
USB-5132/5133	Yes
PXI/PCI-5142	Yes
PXI/PCI-5152	Yes
PXI/PCI-5153	Yes
PXI/PCI-5154	Yes
PXIe-5160/5162	Yes
PXIe-5185/5186	Yes
PXIe-5622	Yes
PXI-5900	Yes
PXI/PCI-5922	Yes
SDI-Based Oscilloscopes
PXIe-51101	Yes
PXIe-51111	Yes
PXIe-51131	Yes
516x Oscilloscopes
PXIe-51631	Yes
PXIe-51641	Yes
517x Oscilloscopes
PXIe-51701	Yes
PXIe-51711	Yes
PXIe-51721	Yes
1External calibration of this module is not supported in LabVIEW NXG.

LabVIEW NXG Help

View context help in LabVIEW by pressing and hovering over an object.

Search for items using the search bar in the upper right corner of the LabVIEW window. You can also view context help for the search results.

Additional documentation is available online at ni.com/manuals.

LabVIEW NXG Examples

Launch LabVIEW and click the Learning tab.

LabVIEW lessons are located in the Lessons tab, and LabVIEW Examples are located in the Examples tab. Follow the instructions in the lessons and examples.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:

• For more information about silent installations of individual NI products, refer to Customize and Automate Installation of a Single Installer.
• For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to Customize and Automate Installation of a Suited Installer.
• To determine what version of NI Installers your product contains, refer to Determine Type and Version of My National Instruments Installer.
  

Using NI Software with Microsoft Windows 10

Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.

Unsupported Windows Operating Systems

NI-SCOPE no longer supports Windows Vista/XP/7/8.x, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit http://www.ni.com/r/win32bitsupport.

---

Legal Information

Copyright

© 1999–2021 National Instruments. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

• Notices are located in the \_Legal Information and directories.
• EULAs are located in the \Shared\MDF\Legal\license directory.
• Review \_Legal Information.txt for information on including legal information in installers built with NI products.
  

U.S. Government Restricted Rights

If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.

IVI Foundation Copyright Notice

Content from the IVI specifications reproduced with permission from the IVI Foundation.

The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the NI products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.

375360AB-01