机器视觉论坛VISIONBBS_视觉之家VISIONHOME微信公众号:石鑫华视觉网

 找回密码
 注册会员
查看: 241|回复: 0

[NI应用软件] NI License Manager 3.7.0 Win32Eng NI许可证管理器NILM3.7.0

[复制链接]
  • TA的每日心情

    7 小时前
  • 签到天数: 2332 天

    连续签到: 4 天

    [LV.Master]2000FPS

    发表于 2021-7-1 11:41:26 | 显示全部楼层 |阅读模式

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有帐号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件模块工具包驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Acvivator来激活,以下链接可下载:
    NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
    http://visionbbs.com/thread-490-1-1.html

    视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
    文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
    http://visionbbs.com/thread-26524-1-1.html

    NI License Manager 3.7.2 Win32Eng NI许可证管理器NILM3.7.2

    License Manager可帮助您管理许可的NI软件资产。
    许可证管理器是实用程序软件,您可以使用它来激活、停用和传输带有许可证激活代码或许可证文件的软件许可证。许可证管理员可以使用许可证管理器自动激活产品并添加批量许可证服务器。
    License Manager helps you manage licensed NI software assets.
    License Manager is utility software that you can use to activate, deactivate, and transfer software licenses with license activation codes or license files. License administrators can use License Manager to automate product activation and add volume license servers.

    Win32Eng
    3.7
    文件名: NILM_3.7.2.zip
    文件大小: 77704590 字节 (74.10 MB)
    修改日期: 2019-06-25 03:01
    MD5: 5e08976d1d836a8c0d9906ff09715c21(官方正确)
    SHA1: 7b7b0df01faae4188c8b6477b075b28e03804da5
    SHA256: f3cbeb062ccfe2d939976b252eef6fdee3325ea776ea77e835a12315b5389504
    CRC32: aadc08fe

    百度网盘和NI官方下载地址:
    注册登陆视觉论坛会员购买附件查看下载地址
    LM3.7.2.txt (456 Bytes, 下载次数: 0, 售价: 5 快钱)

    NI License Manager Readme
    Use the National Instruments License Manager to activate and manage your licenses or configure NI products on your system to obtain licenses from volume license servers.
    Known Issues
    The following table contains a list of known issues in NI License Manager 3.7 and any available workarounds.
    IDKnown Issue
    136355, 136356Computers using older versions of NI software, such as NI TestStand 3.0, NI LabVIEW 7.1, or NI LabWindows™/CVI™ 7.0 cannot check out a license from a volume license server.

    Workaround: Contact NI technical support at support@ni.com for assistance in resolving this issue. Refer to KnowLEDgeBase article 475FE2QA for more information.

    Bug Fixes
    The following table contains the IDs and titles of a subset of issues fixed in NI License Manager 3.7. This table is not an exhaustive list of issues fixed.
    IDFixed Issue
    220216Fixed an issue where disconnected licenses were not accounted for in NI License Manager in-use count.

    Note:  Requires NI Volume License Manager 3.0 or later.
    306393Fixed an issue where a Try Again/Continue/Cancel Media prompt appeared during activation if the media is changed.
    300220Fixed an issue where a bad network adapter caused activation to fail.
    129588Fixed an issue with enforcing the End User License Agreement (EULA) properly with temporary named-user licenses obtained from a volume license server.

    Automating the Installation of NI Products
    You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
    If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
    For more information, refer to the following KnowledgeBase articles:
    • For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
    • For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
    • To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.


    Important Information
    Copyright
    ©2004–2012 National Instruments Corporation. All rights reserved.
    Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
    National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
    End-User License Agreements and Third-Party Legal Notices
    You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:
    • Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
    • EULAs are located in the <National Instruments>\Shared\MDF\EULAs directory.
    • Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
    Trademarks
    LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.
    Other product and company names mentioned herein are trademarks or trade names of their respective companies.
    Patents
    For patents covering the National Instruments products/technology, refer to the appropriate location: Help&#187;Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.


    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    《LabVIEW Vision函数实例详解》教程-NI Vision所有函数使用方法介绍,基于NI VISION2020,兼容VDM2021
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程10种全套
    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|机器视觉论坛VISIONBBS.COM|视觉之家VISIONHOME.CN|东莞市华动智能科技有限公司 ( 粤ICP备17078359号-2 )|网站地图

    GMT+8, 2021-10-20 15:47

    Powered by shixinhua.com X3.4

    © 2009-2021 VISIONBBS.COM 浏览量:

    快速回复 返回顶部 返回列表