机器视觉论坛VISIONBBS_视觉之家VISIONHOME微信公众号:石鑫华视觉网

 找回密码
 注册会员
查看: 48|回复: 0

[NI驱动软件] NI-VISA 21.0 Driver Win32/64Eng 美国国家仪器虚拟仪器软件架构NI-VISA21.0 Windows版驱动下载

[复制链接]
  • TA的每日心情
    慵懒
    11 小时前
  • 签到天数: 2306 天

    连续签到: 29 天

    [LV.Master]2000FPS

    发表于 2021-9-3 10:19:01 | 显示全部楼层 |阅读模式

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有帐号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件模块工具包驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Acvivator来激活,以下链接可下载:
    NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
    http://visionbbs.com/thread-490-1-1.html

    视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
    文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
    http://visionbbs.com/thread-26524-1-1.html

    NI-VISA 21.0 Driver Win32/64Eng 美国国家仪器虚拟仪器软件架构NI-VISA21.0 Windows版驱动下载

    NI-VISA为使用GPIB、串行、PXI和其他类型仪器的用户提供支持。
    NI-VISA是一个NI仪器驱动程序,是虚拟仪器软件架构(VISA) I/O标准的具体实现。虚拟仪器软件架构(VISA)这一标准用于配置和编程基于GPIB、VXI、PXI、串口(RS232/485)、以太网/LXI和/或USB接口的仪器系统以及故障分析。NI-VISA包括实用程序、底层控制功能和范例,可帮助您快速创建应用程序
    注意,NI-VISA从VISA14.0版开始,使用年代名称来命名,即14代表的是2014年,不再延续之前的5.X之类的名称。而在VISA5.4.1及之前的版本,则是使用数字版本来命名的,5并不是代表着2005年之类的。

    NI-VISA 21.0
    发布日期
    21-8-3
    包含的版本
    21.0.0
    受支持的操作系统
    Windows 10 64-bit
    Windows Server 2016 64-bit
    Windows Server 2019 64-bit
    语言
    中文, 德语, 日语, 法语, 英文, 韩语
    校验和
    文件大小: 1193064448 字节 (1.11 GB)
    修改日期: 2021-08-04 10:01
    MD5: 5ae7cdd0a413d507a671bb093ecad0e8
    SHA1: 25e530e90060f42c27398cd1667a625bda5dda42
    SHA256: 9f7f42d4f559d67f59790520e956232aafc182c703524370fb32efe5dfc801cd
    CRC32: d429bf96

    百度网盘和NI官方下载地址:
    请注册视觉论坛会员登陆后购买附件下载查看,充值请备注论坛用户名UID或联系在线客服
    VISA21.0.txt (550 Bytes, 下载次数: 0, 售价: 5 快钱)

    NI-VISA 21.0 for Windows Readme
    June 2021
    This file contains installation instructions and compatibility information for NI-VISA 21.0.
    You can find more release information on ni.com.
    • NI-VISA Release Notes: Known issues, bugs fixed since the last release, and other notes about this release
    • NI-VISA Manuals: New features, behavior changes, and other documentation
    If you plan to use LabVIEW NXG, refer to LabVIEW NXG Support and Considerations.
    Overview
    Supported Operating Systems
    Supported Platforms
    Application Software Support
    Installation Instructions
    Product Security and Critical Updates
    New Features
    Accessing the Help
    Finding Examples
    LabVIEW NXG Support and Considerations
    Automating the Installation of NI Products
    Using NI Software with Microsoft Windows 10
    Legal Information

    Overview
    NI-VISA is the NI implementation of the Virtual Instrument Software Architecture (VISA), a standard for configuring, programming, and troubleshooting instrumentation systems comprising GPIB, VXI, PXI, Serial, Ethernet, and/or USB interfaces.
    Supported Operating Systems
    NI-VISA 21.0 for Windows supports the following platforms:
    • Windows 10
    • Windows Server 2019
    • Windows Server 2016
    • NI Real-Time Phar Lap ETS
    • NI Linux® Real-Time
    While this distribution targets all of these platforms, you can run setup.exe only on the Windows variants.
    Note    NI-VISA no longer supports Windows Vista/XP/7/8.1, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. NI-VISA 21.0 will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI-VISA 21.0 to an unsupported OS. Additionally, after installing NI-VISA 21.0 on a supported OS computer, you cannot create any installers containing any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio for an unsupported OS computer.
    For detaiLED information about NI operating system support, visit http://www.ni.com/r/win32bitsupport.
    NI Software Drops Support for Phar Lap ETS Real-Time Operating System in 2022
    NI Software will drop support for Phar Lap ETS Real-Time Operating System starting in 2022. Versions of this product that ship after May 1, 2022, may not install or execute correctly on this operating system. For high-level information on the support roadmap for Phar Lap and its replacement, NI Linux Real-Time, please visit ni.com/r/xf35k1. To find out what hardware is supported on PXI controllers running NI Linux Real-Time, please visit ni.com/r/b7g5wi.
    Supported Platforms
    NI-VISA currently supports the frameworks and programming languages shown in the following table.

    Windows 10
    Server 2019
    Server 2016
    LabVIEW RT (Phar Lap ETS)
    NI Linux Real-Time
    GPIB
    ✔
    ✔
    ✔1
    Serial
    ✔
    ✔
    ✔
    PXI/PCI
    ✔
    ✔
    ✔1
    TCPIP
    ✔
    ✔
    ✔
    Remote Client
    ✔
    ✔
    ✔
    Remote Server
    ✔
    ✔
    ✔
    ENET Serial
    ✔
    ✔
    ✔
    USB
    ✔
    ✔
    ✔
    VISA Interactive Control
    ✔

    NI I/O Trace
    ✔

    1Support limited to PXI and PXIe targets.
    Notes
    • NI-VISA supports the WINNT, GWINNT, WIN64, and GWIN64 frameworks defined by the VXIplug&play Systems Alliance and the IVI Foundation.
    • The VXIplug&play Systems Alliance developed the concept of a framework to categorize operating systems, programming languages, and I/O software libraries to bring the most useful products to the most end-users. A framework is a logical grouping of the choices that you face when designing a VXI system. You must always choose an operating system and a programming language along with an application development environment (ADE) when building a system. There are trade-offs associated with each of these decisions; many configurations are possible. The VXIplug&play Systems Alliance grouped the most popular operating systems, programming languages, and ADEs into distinct frameworks and defined in-depth specifications to guarantee interoperability of the components within each framework. To claim VXIplug&play compliance, a component must be compliant within a given framework.
    Application Software Support
    NI-VISA 21.0 supports the following application software versions, including service packs. If you are not using NI application software, refer to Microsoft Visual Studio Support.
    Application Software
    Versions Supported by NI-VISA
    LabVIEW2018, 2019, 2020, 2021
    LabVIEW NXG5.0, 5.1
    LabWindows/CVI2017 and later
    Measurement Studio2019 and later
    Microsoft Visual Studio Support for the IVI-Compliant NI-VISA .NET Class Library
    If you are using the IVI-compliant NI-VISA .NET Class Library, the .NET 4.6.2 Framework (minimum) is required. You can use the NI-VISA .NET Class Library with the Visual C# or Visual Basic .NET programming languages in any Visual Studio version that can target the .NET 4.0 Framework or later. You can use the NI-VISA .NET Class Library in 32-bit or 64-bit applications.
    Microsoft Visual Studio Support for the VisaNS .NET Class Library
    Note: The Measurement Studio VisaNS .NET Class Library is being deprecated and superseded by an IVI-compliant NI-VISA .NET Class Library. Refer to the New Features section for more information.
    Installation InstructionsInstalling NI-VISA for LabVIEW
    You can install all of your LabVIEW products—including NI-VISA—using the LabVIEW 2021 platform media.
    To request additional LabVIEW platform media, visit ni.com/r/media.
    Note
    • If Windows Update is enabled, the installation process might hang if Windows Update interferes with the installation of Microsoft Visual C++ 2015 Run-Time. Visit ni.com/r/exjq43 for more information and steps to resolve this issue.
    • If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.
    Before you install NI-VISA 21.0, NI recommends that you uninstall any versions of VISA prior to NI-VISA 2.0.1.
    After uninstalling NI-VISA, some DLLs and executables may remain in the NI-VISA directories. To complete the uninstall process, you must restart your machine.
    Note: The uninstaller application does not notify you when rebooting is necessary. If you plan to reinstall NI-VISA, you always should reboot the machine after running the uninstaller.
    Agilent/HP Controller Support
    NI-VISA now works with Agilent/HP GPIB and VXI controller cards. To use this feature, go into MAX, select Tools»NI-VISA»VISA Options, choose the Passports tab, and enable the NiVisaTulip.dll Passport. NI-VISA automatically finds and accesses any GPIB or VXI devices. However, NI-VISA does not configure the Agilent/HP hardware; you still must do that with the Agilent/HP I/O Config utility.
    If you have both NI and Agilent/HP controllers in the same system, you must configure the cards at different system addresses, such as GPIB0 and GPIB1. If both vendors try to use the same interface address, NI-VISA reports an error from viFindRsrc or VISA Find Resources.
    Creating and Digitally Signing Catalog Files
    (Windows 10) If you generate an INF file using the NI-VISA Driver Wizard, you must create and digitally sign a Windows Catalog (.cat) file before you can install the INF file on a Windows 10 machine. For more information about digitally signing a .cat file for Windows 10, visit ni.com/r/infwin8.
    For more information about creating and signing catalog files, Microsoft has a Kernel-Mode Code Signing Walkthrough whitepaper that describes the details of this process. The generated catalog file should reference only the INF file.
    Product Security and Critical Updates
    Visit ni.com/security to view and subscribe to receive security notifications about NI products. For information about critical updates from NI, refer to Available Critical and Security Updates for NI Software.
    New FeaturesNI-VISA 21.0
    Added support for LabVIEW NXG 5.1
    NI-VISA 20.0
    Added support for LabVIEW NXG 5.0
    NI-VISA 19.5
    Added support for LabVIEW NXG 4.0
    Accessing the Help
    Refer to the NI-VISA Help, accessible from LabVIEW by selecting Help>>LabVIEW Help, for information about NI-VISA.
    Finding Examples
    Select Help>>Find Examples from LabVIEW to launch the NI Example Finder. LabVIEW examples for NI-VISA are located in the labview\examples\Instrument IO\VISA directory. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.
    LabVIEW NXG Support and Considerations
    The following sections detail considerations for using LabVIEW NXG with NI-VISA.
    LabVIEW NXG Operating Systems and System Requirements
    Software support for LabVIEW NXG differs in the following ways:
    • System requirements—Only 64-bit (x64) processors are supported.
    • Operating system—Only 64-bit operating systems are supported. Refer to the Supported Operating Systems section for more information.
    Installing NI-VISA
    NI automates LabVIEW NXG installation using a package manager. Complete the following steps to install NI-VISA for LabVIEW NXG.
    • Visit ni.com/r/nxgdownload to access the LabVIEW NXG download page.
    • Click Download LabVIEW NXG.
    • NI Package Manager installs, then automatically opens a download window.
    • Select LabVIEW NXG Suite and click the green Install button.
    • Select LabVIEW NXG 5.1 and NI-VISA.
    • Complete the installer instructions to download LabVIEW NXG 5.1 and NI-VISA.
    Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.
    LabVIEW NXG Help
    View context help in LabVIEW by pressing <Ctrl-H> and hovering over an object.
    Search for items using the search bar in the upper right corner of the LabVIEW window. You can also view context help for the search results.
    Additional documentation is available online at ni.com/manuals.
    LabVIEW NXG Examples
    Launch LabVIEW and click the Learning tab.
    LabVIEW lessons are located in the Lessons tab, and LabVIEW Examples are located in the Examples tab. Follow the instructions in the lessons and examples.
    Automating the Installation of NI Products
    You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
    If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.
    For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.
    Using NI Software with Microsoft Windows 10
    Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.

    Legal Information
    Copyright
    &#169; 1995–2021 National Instruments Corporation. All rights reserved.
    Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
    NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
    End-User License Agreements and Third-Party Legal Notices
    You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
    • Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
    • EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
    • Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
    U.S. Government Restricted Rights
    If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
    IVI Foundation Copyright Notice
    Content from the IVI specifications reproduced with permission from the IVI Foundation.
    The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
    Trademarks
    Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
    Patents
    For patents covering the NI products/technology, refer to the appropriate location: Help>>;Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
    374899N-01



    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    《LabVIEW Vision函数实例详解》教程-NI Vision所有函数使用方法介绍,基于NI VISION2020,兼容VDM2021
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程10种全套
    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|机器视觉论坛VISIONBBS.COM|视觉之家VISIONHOME.CN|东莞市华动智能科技有限公司 ( 粤ICP备17078359号-2 )|网站地图

    GMT+8, 2021-9-20 21:23

    Powered by shixinhua.com X3.4

    © 2009-2021 VISIONBBS.COM 浏览量:

    快速回复 返回顶部 返回列表