机器视觉论坛VISIONBBS_视觉之家VISIONHOME微信公众号:石鑫华视觉网

 找回密码
 注册会员
查看: 53|回复: 0

[LV工具模块] LabVIEW Modulation Toolkit 21.0 Win32/64Eng LabVIEW调制工具包2021

[复制链接]
  • TA的每日心情

    昨天 09:01
  • 签到天数: 2312 天

    连续签到: 35 天

    [LV.Master]2000FPS

    发表于 2021-9-6 11:20:01 | 显示全部楼层 |阅读模式

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有帐号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件模块工具包驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Acvivator来激活,以下链接可下载:
    NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
    http://visionbbs.com/thread-490-1-1.html

    视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
    文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
    http://visionbbs.com/thread-26524-1-1.html

    LabVIEW Modulation Toolkit 21.0 Win32/64Eng LabVIEW调制工具包2021

    LabVIEW调制工具包
    LabVIEW调制工具包为LabVIEW提供了调制信号生成和分析功能,适用于研究、设计、原型,验证和测试应用。
    LabVIEW调制工具包是LabVIEW的一个软件附件,提供了用于生成、分析、处理和可视化模拟和数字调制信号的功能和工具。该工具包可让您使用各种调制方案(包括AM、FM、PM、ASK、FSK、MSK、PSK和QAM)对信号进行调制和解调。使用LabVIEW调制工具包,您可以执行信道编码、交织编码和均衡等等高级信号处理,也可以测量频率误差、误差矢量幅度(EVM)和误码率(BER)等参数,以验证信号质量。使用LabVIEW调制工具包,您还可以应用常见的信号减损,并通过星座图、眼图和网格图等可视化工具查看信号。

    LabVIEW Modulation Toolkit调制工具包21.0
    发布日期
    2021/8/3
    包含的版本
    21.0.0完整版
    受支持的操作系统
    Windows 10 64-bit
    Windows Server 2016 64-bit
    Windows Server 2019 64-bit
    应用程序位数
    32/64位
    语言
    英文
    校验和
    文件大小: 702980096 字节 (670.41 MB)
    修改日期: 2021-08-04 09:26
    MD5: 4d356662286ec648f1fa97a11f6d441b
    SHA1: cccb6aa4a7d85d221192b31c214fdf97f0259575
    SHA256: e1fdb6fd94031774499d7341033bef964c71fd1f75ef80f63202a1769ed4ad04
    CRC32: 64a55f41

    百度网盘与NI官方下载地址:
    Modulation21.0.txt (608 Bytes, 下载次数: 0, 售价: 5 快钱)

    Modulation Toolkit 21.0 Readme
    July 2021
    This file contains installation instructions and compatibility information for Modulation Toolkit 21.0.
    You can find more release information on ni.com.
    • LabVIEW Modulation Toolkit Release Notes: Known issues, bugs fixed since the last release, and other notes about this release
    • LabVIEW Modulation Toolkit Manuals: New features, behavior changes, and other documentation

    Overview
    New Features
    Supported Hardware
    System Requirements
    Supported Operating Systems
    Application Software Support
    Installation Instructions
    Accessing the Help
    Finding Examples
    Product Security and Critical Updates
    Automating the Installation of NI Products
    Using NI Software with Microsoft Windows 10
    Legal Information

    Overview
    Modulation Toolkit provides signal generation and analysis capabilities for analog and digital modulation schemes.
    New Features
    • Modulation Toolkit 21.0 adds support for LabVIEW 2021 (32- and 64-bit)
    • Modulation Toolkit 20.0 adds support for LabVIEW 2020 (32- and 64-bit)
    • Modulation Toolkit 19.0 adds support for LabVIEW 2019 (32- and 64-bit)
    Supported HardwareVector Signal Generators
    • PXI-5670
    • PXI-5671
    • PXIe-5672
    • PXIe-5673
    • PXIe-5673E
    Device-specific information about these modules is included in the NI RF Signal Generators Help.
    Arbitrary Waveform Generators
    • PXIe-5442
    • PXIe-5450
    • PXIe-5451
    Vector Signal Analyzers
    • PXI-5661
    • PXIe-5663
    • PXIe-5663E
    • PXIe-5665
    • PXIe-5668
    Device-specific information about these modules is included in the NI RF Vector Signal Analyzers Help.
    Vector Signal Transceivers
    • PXIe-5644
    • PXIe-5645
    • PXIe-5646
    Device-specific information about these modules is included in the NI RF Vector Signal Transceivers Help.
    Digitizers
    • PXI-5122
    • PXI-5124
    • PCI-5122
    • PCI-5124
    • PXI-5922
    • PXI-5142
    • PXIe-5122
    Device-specific information about these modules is included in the NI High-Speed Digitizers Help.
    System Requirements
    Modulation Toolkit has the following system requirements:
    • Processor—1 GHz or faster 64-bit (x64) Processor or equivalent
    • RAM—4 GB
    • A screen resolution of 1,024 x 768
    • Windows 10 with all available critical updates and service packs
    • If your application runs on an RT target, NI recommends that you have at least 128 MB of RAM
    Supported Operating Systems
    Modulation Toolkit 21.0 supports the following operating systems:
    • Windows 10
    • Windows Server 2016
    • Windows Server 2019
    Note  Modulation Toolkit no longer supports Windows Vista/XP/7/8.1, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. Modulation Toolkit 21.0 will not install or run on an unsupported OS. You cannot deploy or distribute applications that use Modulation Toolkit 21.0 to an unsupported OS. Additionally, after installing Modulation Toolkit 21.0, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.
    For more information about the changes to our OS support, visit https://www.ni.com/r/win32bitsupport.
    Application Software Support
    Modulation Toolkit 21.0 supports the following application software versions, including service packs.
    • NI LabVIEW 2018 SP1, 2019 SP1, 2020 SP1, or 2021
    • NI LabVIEW Real-Time Module 2018 SP1, 2019, 2020, or 2021
    Installation Instructions
    Download the Modulation Toolkit installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.
    Note   If Windows Update is enabLED, the installation process might hang if Windows Update interferes with the installation of Microsoft Visual C++ 2015 Run-Time. Visit ni.com/r/exjq43 for more information and steps to resolve this issue.
    Accessing the Help
    Refer to the Modulation Toolkit Help, accessible from Start»National Instruments»Modulation Toolkit»Modulation Toolkit Documentation, for information about the Modulation Toolkit Help.
    Finding Examples
    In LabVIEW, you can use the NI Example Finder to search or browse examples. Modulation Toolkit examples are classified by keyword, so you can search for a particular device or measurement function. In LabVIEW, select Help»Find Examples to launch the NI Example Finder. The NI Example Finder offers two ways to access all installed LabVIEW example VIs (including NI–RFSG and Modulation Toolkit examples) and their descriptions:
    • Click the Browse tab to locate modulation examples by task at Toolkit and Modules»Modulation or by directory structure at Modulation.
    • Click the Search tab to search all installed examples by keyword. For example, search for "Modulation" to locate all Modulation Toolkit examples.
    You can also access all the installed Modulation Toolkit examples for LabVIEW at Start»National Instruments»Modulation Toolkit»Modulation Toolkit Examples.
    Examples also are available online that demonstrate integrating NI RF signal generators with NI RF signal analyzers and NI toolkit software including the Modulation Toolkit. Refer to ni.com/examples for these examples and for more information.
    Select Help»Find Examples from LabVIEW to launch the NI Example Finder. LabVIEW examples for the Modulation Toolkit are located in the labview\examples\Modulation directory. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.
    Product Security and Critical Updates
    Visit ni.com/security to view and subscribe to receive security notifications about NI products. For information about critical updates from NI, refer to Available Critical and Security Updates for NI Software.
    Automating the Installation of NI Products
    You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
    If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.
    For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.
    Using NI Software with Microsoft Windows 10
    Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.

    Legal Information
    Copyright
    © 2002–2021 National Instruments Corporation. All rights reserved.
    Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
    NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
    End-User License Agreements and Third-Party Legal Notices
    You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
    • Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
    • EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
    • Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
    U.S. Government Restricted Rights
    If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
    IVI Foundation Copyright Notice
    Content from the IVI specifications reproduced with permission from the IVI Foundation.
    The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
    Trademarks
    Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
    Patents
    For patents covering the NI products/technology, refer to the appropriate location: Help&#187;Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.

    375435G-01

    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    《LabVIEW Vision函数实例详解》教程-NI Vision所有函数使用方法介绍,基于NI VISION2020,兼容VDM2021
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程10种全套
    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|机器视觉论坛VISIONBBS.COM|视觉之家VISIONHOME.CN|东莞市华动智能科技有限公司 ( 粤ICP备17078359号-2 )|网站地图

    GMT+8, 2021-9-27 08:13

    Powered by shixinhua.com X3.4

    © 2009-2021 VISIONBBS.COM 浏览量:

    快速回复 返回顶部 返回列表