NI-SLSC 2022 Q4 Driver Win11 32/64bitEng NI开关负载信号调理设备驱动22.8版下载

石鑫华视觉

NI-SLSC 2022 Q4 Driver Win11 32/64bitEng NI开关负载信号调理设备驱动22.8版下载

NI-SLSC
NI-SLSC驱动用于支持在NI数据采集设备（如PXI和CompactRIO）上使用开关、负载和信号调理(SLSC)设备。
NI-SLSC是一种仪器驱动程序，为SLSC（开关、负载和信号调理）硬件提供支持。它集成了开关、负载和信号调理功能，可扩展基于PXI和C系列平台的系统功能。SLSC可将连接标准化，并提供模块化方法，适用于信号调理、故障插入和其他测试需求。NI-SLSC还包括一个开关路由API，使您能够在LabVIEW中控制和配置NI和第三方SLSC开关。

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

发布日期：2022/10/12
包含的版本：2022 Q4完整版，版本号22.8.0
受支持的操作系统：
Windows 11
Windows Server 2022 64-bit
Windows 10 64-bit
Windows Server 2016 64-bit
Windows Server 2019 64-bit
语言：English
应用程序位数：32/64位
校验和：
文件大小: 1250316288 字节 (1.16 GB)
修改日期: 2022-10-13 09:54
MD5: a96b07d004c5ecb29fb249390e053aa4
SHA1: 1ce32b9b9df1ae7a87867d0dedebcc6b1756efd2
SHA256: d0d5a33221833eaede571959f35e235322c347ae4d9430d9e65e2b88655cc6fb
CRC32: e175121b

百度网盘和NI官方下载地址：
请注册登录视觉论坛账号，购买附件查看下载地址
NI-SLSC 2022Q4.txt (514 Bytes, 下载次数: 0, 售价: 10 元)

2022-11-21 16:18 上传

点击文件名下载附件

NI-SLSC 2022 Q4 Readme

October 2022

This file contains installation instructions and compatibility information for NI-SLSC 2022 Q4.

You can find more release information on ni.com.

• NI-SLSC Release Notes: Known issues, bugs fixed since the last release, and other notes about this release
• NI-SLSC Documentation: New features, behavior changes, and other documentation
  

---

Supported Operating Systems

Application Software Support

Installation Instructions

Product Security and Critical Updates

New Features

Supported Hardware

Behavior Changes

Accessing the Documentation

Automating the Installation of NI Products

Using NI Software with Microsoft Windows 11

Unsupported Windows Operating Systems

NI Software Drops Support for Phar Lap ETS Real-Time Operating System in 2022

Legal Information

---

Supported Operating Systems

NI-SLSC 2022 Q4 supports the following operating systems:

• Windows 11
• Windows 10
• Windows Server 2022
• Windows Server 2019
• Windows Server 2016
• NI Linux® Real-Time
  

Note  Refer to Unsupported Windows Operating Systems for more information about support for Microsoft Windows OSes.

Application Software Support

NI-SLSC 2022 Q4 supports the following application software versions, including service packs.

Application Software	Versions Supported by NI-SLSC
LabVIEW	2019 and later
LabVIEW Real-Time Module	2019 and later

Installation Instructions

Download the NI-SLSC installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using Package Manager.

After installing your software, you will need to activate it. Activating your software verifies the licenses associated with your NI account, so you can start using your software. You have different options for activation, based on your software and how it was purchased. Please visit ni.com/activate for more information on activation methods.

Note  If Windows Update is enabled, the installation process might hang if Windows Update interferes with the installation of Microsoft Visual C++ 2015 Run-Time. Visit ni.com/r/exjq43 for more information and steps to resolve this issue.

Updated LabVIEW Compatibility Policy

The "NI-SLSC Support for LabVIEW" package supports applications using NI-SLSC ​with LabVIEW 2023 or later. When installing NI-SLSC, this package will be recommended if you have already installed LabVIEW 2023 or later and installs to the LVAddons directory.

LVAddons directory location: C:\Program Files\NI\LVAddons

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about NI products. For information about critical updates from NI, refer to Available Critical and Security Updates for NI Software.

Supported Hardware

Visit NI Hardware and Operating System Compatibility to view driver, desktop operating system, and real-time operating system support for individual hardware devices.

To view information for your device:

• Select your hardware model in the dropdown list on the page to view compatibility information for your device.
• Type your hardware model number in the dropdown list on the web page to filter the list of available devices.
  

Note: Some compatibility information may only be available in the archive attached to the NI Hardware and Operating System Compatibility page. For historic driver and OS support information, refer to the readme for the relevant driver version.

Behavior Changes

The default device reservation timeout for the SLSC Initialize and SLSC Reserve nodes has been increased to five seconds. This change improves the robustness of device reservation in typical scenarios. Previously, the default reservation timeout value was zero seconds.

For existing code that does not explicitly wire a reservation timeout, this change could cause the program to stall for up to 5 seconds upon an attempted reservation (a stall will occur only if the device in question is already reserved). If desired, the previous behavior can be restored by explicitly setting the timeout to zero seconds.

Accessing the Documentation

Refer to the NI-SLSC Help, accessible by navigating to the Start»National Instruments»NI-SLSC Documentation, for information about the NI-SLSC driver software. You can also refer to the NI-SLSC VI Reference Help, accessible by selecting Help»NI-SLSC VI Reference Help in LabVIEW, for information about SLSC VIs.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.

If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.

For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.

Using NI Software with Microsoft Windows 11

Microsoft Windows 11 is the latest version of the Windows operating system and features significant changes compared to previous versions. For more information about NI support for Windows 11, refer to NI Product Compatibility for Microsoft Windows 11.

Unsupported Windows Operating Systems

NI-SLSC no longer supports Windows Vista/XP/7/8.x, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit https://www.ni.com/r/win32bitsupport.

NI No Longer Supports Phar Lap ETS Real-Time Operating System

NI Software no longer supports Phar Lap ETS Real-Time Operating System. Versions of this product that ship after May 1, 2022, may not install or execute correctly on this operating system. For high-level information on the support roadmap for Phar Lap and its replacement, NI Linux Real-Time, visit ni.com/r/xf35k1. To find out what hardware is supported on PXI controllers running NI Linux Real-Time, visit ni.com/r/b7g5wi.

---

Legal Information

Copyright

© 2016–2022 National Instruments Corporation. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

• Notices are located in the \_Legal Information and directories.
• EULAs are located in the \Shared\MDF\Legal\license directory.
• Review \_Legal Information.txt for information on including legal information in installers built with NI products.
  

U.S. Government Restricted Rights

If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.

IVI Foundation Copyright Notice

Content from the IVI specifications reproduced with permission from the IVI Foundation.

The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.