NI OPC Servers 2016 Win32/64Eng NI OPC服务器2016

石鑫华视觉

NI OPC Servers 2016 Win32/64Eng NI OPC服务器2016

OPC Servers
OPC服务器提供单一、一致的接口，可通过OPC标准与多个设备通信。
OPC服务器是LabVIEW的一款附加软件，可将专用工业协议转换为开放式OPC Classic和OPC统一架构(UA)协议。通过该转换，LabVIEW应用程序就可以通过LabVIEW OPC UA工具包附带的OPC UA客户端，与许多不同的可编程逻辑控制器(PLC)和第三方设备进行通信，因而用户只需在一个平台上即可对工业系统进行高性能测量和控制。

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI OPC Servers 2016
发布日期：2016/1/29
包含的版本：2016完整版
受支持的操作系统
Windows 10 (32-bit and 64-bit)
Windows 8 (32-bit and 64-bit)
Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP Service Pack 3 or later
Windows Server 2008 R2 (64-bit)
Windows Server 2003 R2 (32-bit)
语言：English
应用程序位数：32/64位
校验和：
文件大小: 228811328 字节 (218.21 MB)
修改日期: 2016-03-29 00:00
MD5: 0d6b9013b5143a7a841b8b4a0a29707b（秒传）
SHA1: 23a2e62ed2845e5ccf6b84dbcd21c9d0ebc43676
SHA256: 786396cf8238cb71e6d96ca4ec0076bafd879dc8cfa7338d23a80207fe7c86ea
CRC32: c696f263

百度网盘和NI官方下载地址：
请注册登录视觉论坛账号，购买附件查看下载地址
OPC Server2016.txt (497 Bytes, 下载次数: 6, 售价: 10 元)

2022-12-1 10:37 上传

点击文件名下载附件

NI OPC Servers 2016 Readme

January 2016

This file contains important information about the NI OPC Servers, including system requirements, installation and activation instructions, and a list of new drivers.

Overview

System Requirements

Installation Instructions

Licensing and Activation

Drivers Usage

New Drivers and Changes

Accessing the Help

Automating the Installation of NI Products

Using NI Software with Microsoft Windows 10

Using NI Software with Microsoft Windows 8.1

NI Software Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003

---

Overview

NI OPC Servers provides a single consistent interface to communicate with multiple devices, saving you from learning new communication protocols and spending time understanding new applications. The combination of NI OPC Servers and other NI products, such as LabVIEW, the LabVIEW Datalogging and Supervisory Control (DSC) Module, Lookout, Measurement Studio, and LabWindows™/CVI™, provides a single platform for delivering high-performance measurements and control to new and existing industrial systems.

System Requirements

NI OPC Servers has both software and hardware minimum system requirements. This application supports the following operating systems:

• Windows 10 (32-bit and 64-bit)
• Windows 8 (32-bit and 64-bit)
• Windows 7 (32-bit and 64-bit)
• Windows Vista (32-bit and 64-bit)
• Windows XP Service Pack 3 or later
• Windows Server 2008 R2 (64-bit)
• Windows Server 2003 R2 (32-bit)
  

Note  NI OPC Servers does not support Windows NT/Me/2000/98/95 or the Windows Server non-R2 editions.

NI OPC Servers has the following minimum hardware requirements:

• 2.0 GHz processor
• 1 GB installed RAM
• 180 MB available disk space
• Ethernet card
• Super VGA (800x600) or higher resolution video card
• CD-ROM or DVD Drive
  

Application Software Support

The following table lists the application software versions, including service packs, supported by NI OPC Servers.

Application Software	Versions Supported by NI OPC Servers 2016
LabVIEW	2013, 2014, 2015
DSC Module	2013, 2014, 2015
Lookout	6.6

Note  The DSC Module must be the same version as LabVIEW.

NI OPC Servers connects through the OPC client in the DSC Module to enable you to develop a full-fledged Human Machine Interface (HMI) and Supervisory Control and Data Acquisition (SCADA) system with programmable logic controllers (PLCs), programmable automation controllers (PACs), and smart sensors.

Installation Instructions

Note  By default, NI OPC Servers installs with the DSC Module for a two-hour evaluation period and with Lookout fully-licensed.

Complete the following steps to install NI OPC Servers if you purchased NI OPC Servers separately from the DSC Module or Lookout.

Note  Some virus detection programs interfere with the installer. Disable any automatic virus detection programs before the installation. After installation, check your computer for viruses and enable any virus detection programs you disabled.

• Log on as an administrator or as a user with administrator privileges.
• Insert the NI OPC Servers installation media and follow the instructions that appear on the screen.
• Activate NI OPC Servers using the NI License Manager.
  

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.

Licensing and Activation

NI OPC Servers installed with Lookout is licensed. NI OPC Servers installed with the DSC Module provides a temporary license for a two-hour evaluation period. You must activate a valid license to continue using NI OPC Servers after the evaluation period expires.

Use the NI License Manager, available by selecting Start»All Programs»National Instruments»NI License Manager, to activate NI products.

Drivers Usage

NI OPC Servers supports numerous drivers for communication to third-party devices. You can connect to one driver at a time or an unlimited number of drivers simultaneously. To learn about driver usage in NI OPC Servers and to determine the number of drivers you can simultaneously connect to, visit ni.com/info and enter the info code opcdriverusage.

New Drivers and Changes

NI OPC Servers 2016 supports the following new drivers:

• Allen-Bradley ControlLogix Unsolicited
• Allen-Bradley Micro800 Serial
• Allen-Bradley Micro800 Ethernet
• Omron NJ Ethernet
• OPC XML DA Client
  

For a complete list of drivers that NI OPC Servers supports, visit ni.com/info and enter the info code opcdriverlist.

Accessing the Help

Refer to the NI website at ni.com/opc or the NI OPC Servers Help, available by selecting Start»All Programs»National Instruments»OPC Servers 2016»OPC Servers Help, for more information about NI OPC Servers.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:

• For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
• For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.
• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My NI Installer?.
  

Using NI Software with Microsoft Windows 10

Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.

Using NI Software with Microsoft Windows 8.1

When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher.

Using NI Launcher

NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile in the Apps view. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.

Note  NI MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8.1. You can launch NI MAX either from the Apps view or from within NI Launcher.

Pinning Frequently Used Applications

For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:

Current Application	Icon Location	Pin to Action
Windows 8.1 Desktop	Desktop Taskbar	Right-click application and select Pin to Taskbar
Windows 8.1 Desktop	Start screen	Right-click application and select Pin to Start
Windows 8.1 Start screen	Desktop Taskbar	Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen

Finding All Programs

If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files from the Apps view. To get to the Apps view, click the down arrow on the bottom left of the screen.

For more information about NI support for Windows 8.1, visit ni.com/windows8.

NI OPC Servers Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016

NI OPC Servers will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of NI OPC Servers that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:

Product	Info Code
LabVIEW	lifecycle
LabWindows™/CVI™	cvi_lifecycle
Measurement Studio	mstudiolifecycle
TestStand	tslcp
DIAdem	ddlcp
SignalExpress	selcp
VeriStand	nivslifecycle

---

Important Information

Copyright

© 2007–2016 National Instruments. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

For copyright notices, conditions, and disclaimers, including information regarding certain third-party components used in NI OPC Servers, refer to the NI_OPC_Servers_notice.pdf file located in the National Instruments\Shared\NI OPC Servers\V5 directory.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

• Notices are located in the \_Legal Information and directories.
• EULAs are located in the \Shared\MDF\Legal\license directory.
• Review \_Legal Information.txt for information on including legal information in installers built with NI products.
  

U.S. Government Restricted Rights

If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.

IVI Foundation Copyright Notice

Content from the IVI specifications reproduced with permission from the IVI Foundation.

The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.

375754A-01