石鑫华视觉论坛

 找回密码
 注册会员
查看: 49|回复: 0

[NI软件产品] NI RFmx VNA 2024 Q4 Win11 64bitENG RFmx矢量网络分析仪24.8.0

[复制链接]
  • TA的每日心情

    12 小时前
  • 签到天数: 3384 天

    连续签到: 6 天

    [LV.Master]2000FPS

     楼主| 发表于 2024-10-30 14:30:20 | 显示全部楼层 |阅读模式 来自:广东省东莞市 电信

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有账号?注册会员

    x
    NI RFmx VNA 2024 Q4 Win11 64bitENG RFmx矢量网络分析仪24.8.0

    RFmx VNA
    RFmx VNA可通过PXIe-5633矢量网络分析仪(VNA)测量单端口或双端口S参数。
    RFmx VNA是一款测量专用软件,扩展了NI RF仪器软件的功能,可帮助您使用PXIe-5633矢量网络分析仪测量散射参数(S参数)。借助RFmx VNA,您可以对典型RF前端模块中的RF组件(如放大器、天线、滤波器、衰减器和其他DUT)执行复杂的单端口和2端口S参数测量。

    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

    视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

    NI RFmx VNA 2024 Q4
    发布日期:2024/10/8
    包含的版本:2024 Q4完整版/运行版,版本号24.8.0
    受支持的操作系统:
    Windows 11
    Windows Server 2022 64-bit
    Windows 10 64-bit
    Windows Server 2019 64-bit
    语言:English
    应用程序位数:64位

    64位完整版校验和:
    文件大小: 2140813312 字节 (1.99 GB)
    修改日期: 2024-10-17 11:39
    MD5: f72caf71115f6fc483301e9182a9d4b2
    SHA1: d4579e9affc2d0fa5b7fbc9b38732ac378414aa7
    SHA256: 34d84bae1081dca64b5d871bbe1e2401677a0c74288d3a389e43ec25c4c8aa9d
    CRC32: fef8e17f
    百度网盘和NI官方下载地址:
    请注册登录视觉机器论坛用户,购买附件查看下载地址
    RFmx VNA2024Q4RTE.txt (639 Bytes, 下载次数: 0, 售价: 5 元)
    64位运行版校验和:
    文件大小: 856432640 字节 (816.76 MB)
    修改日期: 2024-10-17 11:37
    MD5: ad8a61dbef67c4013e47d3b989580b30
    SHA1: 184e0fb6adf760b6f77cb0ba354a35872237f56a
    SHA256: 01458ef04c0abc79205df6f6031c6afe6ec4ae8dfc6dcf644768e687a3976d4b
    CRC32: fcd8ee08
    百度网盘和NI官方下载地址:
    请注册登录视觉机器论坛用户,购买附件查看下载地址
    RFmx VNA2024Q4Full.txt (591 Bytes, 下载次数: 0, 售价: 10 元)

    RFmx VNA 2024 Q4 New Features and Changes

    New Features

    • Support to specify polar format for S-parameters and Waves.
    • Support to query S-parameters and waves in concise notation.
    • Support for interpolation of corrected S-parameters and waves measurements.
    • Support to query correction state.
    Changes

    • The following fetch VIs are deprecated:
      • RFmxVNA SParams Fetch Real Data.vi
      • RFmxVNA SParams Fetch Complex Data.vi
      • RFmxVNA Waves Fetch Real Data.vi
      • RFmxVNA Waves Fetch Complex Data.vi
    • TipUse the following VIs to fetch measurement data:
      • RFmxVNA SParams Fetch Y Data.vi
      • RFmxVNA Waves Fetch Y Data.vi

      TipUse the following VIs to fetch measurement frequency:
      • RFmxVNA SParams Fetch X Data.vi
      • RFmxVNA Waves Fetch X Data.vi
    • The PXIe_DStarB option for Pulse Generator Trigger terminal export is deprecated.NoteUse PXIe_DStarC instead.
    • The Undefined Thru Using Defined Thru option for Correction:Calibration:Thru:Method is deprecated.
    • The Delay Thru Using Defined Thru option for Correction:Calibration:Thru:Method has been replaced by vCal Thru as Unknown Thru

    RFmx VNA 2024 Q3 New Features and Changes

    New Features

    • Support for List, Linear, and Segmented Sweep types
    • Support for exporting S-parameter measurement results as SnP files
    • Support for SWR, Impedance, and Admittance formats for S-parameters
    • Support for exporting Pulse Generator events
    • Support for aborting an ongoing calibration step
    Behavior Changes

    • Deprecated RFmxVNA Configure Frequency List (Start Stop Points).vi.NoteTo work around this change, configure Sweep Type to Linear, and configure Start Frequency (Hz), Stop Frequency (Hz), and Number of Frequency properties.
    • You can no longer obtain the underlying list of aggregated frequencies across all active segments using the Sweep:Frequency List attribute.NoteUse the Sweep:X-Axis Values read-only attribute instead.
    • The Complex format in InstrumentStudio is no longer plotted as a Smith Chart. It is now plotted as a polar chart.NoteTo plot a Smith chart, set the format to Smith Impedance or Smith Admittance.

    RFmx VNA 2024 Q2 New Features and Changes

    • Support for external triggers for VNA measurements
    • Support for saving and loading stimulus settings along with Calset
    • Support for enabling and disabling automatic scaling down of Intermediate Frequency Bandwidth (IFBW) at low frequencies for measurement speed
    • Support for caching multiple signal switch for measurement speed
    • Support for guided calibration using Mechanical Calkits defined by NI Calkit files (.nckt )
    • Support for basic pulsed S-parameter and waves measurements with internal pulse-trigger
    • Support for embed fixtures to Calsets
    • Support for creating and editing Calkit files for Mechanical Calkits using the standalone Calkit Editor application.
    • Obsoleted the RFmxInstr Load All Configurations VI. Use the RFmxInstr Load Configurations VI along with the appropriate RFmxInstr Load Options property, instead.


    RFmx VNA 2024 Q1 New Features and Changes

    • Calibration: User-defined orientation for Cal-5501
    • Calsets
      • Load one or more named calsets from calset files previously saved
      • Select an active calset from the pool of loaded named calsets
      • Query the names of all loaded named calsets
      • Create a named copy of another named or unnamed calset
      • Query the error terms stored in a calset
    • Support for RFmxVNA SParams and RFmxVNA Waves measurements to perform as composite measurements
    • Added port extension support to specify electrical-length as delay (in seconds) and compensate for constant loss
    • IVI simulation support for PXIe-5633

    RFmx VNA 2023 Q4 Features Overview

    • Measure corrected and uncorrected 1-port or 2-port S-parameters and receiver waves for non-frequency-converting RF devices over a list of frequencies
    • Fixture de-embedding
    • Point averaging
    • Automatic Short-Open-Load (SOL) and Short-Open-Load-Through (SOLT) calibration using Cal-5501 Vector Calibration Module
    • Saving and loading calibration error terms as a calset file
    • Support for PXIe-5633
    • Support for obtaining unprocessed I/Q data utilized for RFmx measurements
    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW HALCON图像处理入门教程(24.09)
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程11种全套
    《LabVIEW Vision函数实例详解2020-2024》教程-NI Vision所有函数使用方法介绍,基于NI VISION2020,兼容VDM21/22/23/24

    QQ|石鑫华视觉论坛 |网站地图

    GMT+8, 2024-11-22 20:16

    Powered by Discuz! X3.4

    © 2001-2024 Discuz! Team.

    快速回复 返回顶部 返回列表