NI Multisim Component Evaluator Analog Devices Edition 12.0.1 Win32 Eng/Ger/Jpn NI电路设计软件Miltisim CE ADE 12.0.1
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI Multisim Component Evaluator Analog Devices Edition 12.0.1 Win32 Eng/Ger/Jpn NI电路设计软件Miltisim CE ADE 12.0.1
NI Multisim Component Evaluator Analog Devices Edition电路设计软件
电路设计套件结合了Multisim和Ultiboard软件，为电路设计、仿真、验证和布局提供了一套完整的工具。
电路设计套件为您提供了直观且经济高效的设计电路工具。您可以执行交互式SPICE仿真并无缝转换到PCB布局和布线软件。该套件专为教学、科研和设计而开发，提供了先进的仿真功能，可以让您清楚地了解电路在各种场景下的性能。
Multisim_Component_Evaluator_Analog_Devices_Edition_12_0_1
文件大小: 512785096 字节 (489.03 MB)
修改日期: 2012-11-22 10:22
MD5: 57e2b10ed2e7fafa35c92095421f6ea5
SHA1: d588cb458d921092a13fef1e03c672f264f087d8
SHA256: 001d4c574f15ddd1aecde7e08fabb90196d20b6e88028010a246369491c8bd9d
CRC32: 81264798
百度网盘与NI官方下载地址：
National Instruments Multisim Component Evaluator Analog Devices Edition Readme for WindowsDecember 2012This file contains important last-minute information about Multisim Component Evaluator for Windows.Refer to the Multisim Tutorial chapter of the Getting Started with NI Circuit Design Suite manual for information about getting started with the component evaluator edition of Multisim. You can access this PDF from Start»All Programs»National Instruments»Multisim Component Evaluator 12.0»Analog Devices Edition»Documentation»Getting Started.Supported Platforms
Known Issues
Bug Fixes
Database Improvements
How to Use NI Software with Windows 8
Supported PlatformsMultisim Component Evaluator supports Windows XP 32-bit edition, Windows Vista 32-bit and 64-bit editions, Windows 7 32-bit and 64-bit editions, Windows 8 32-bit and 64-bit editions, Windows Server 2003 R2 (32-bit) and Windows Server 2008 R2 (64-bit). Multisim Component Evaluator does not support Windows NT/Me/98/95/2000, Windows XP x64, or the Windows Server non-R2 editions.Known IssuesLabVIEW
[*]LabVIEW functionality (LabVIEW instruments and grapher interpolation) will not work if the installation path uses characters that are not native to the "Language for non-Unicode programs" setting, available by selecting Start»Control Panel»Regional and Language Options and selecting the Advanced tab. In the Vista OS, use the "Current language for non-Unicode programs:" setting in the Administrative tab. LabVIEW functionality works for Unicode characters that are native to this setting.
Windows Vista
[*]You cannot install Multisim Component Evaluator on Windows Vista Starter edition.
Multisim
[*]In Pentium III machines, NI Multisim cannot load LV Instruments created in NI LabVIEW 2011 and 2012; this also affects LVM and TDM sources and export. This is due to the use of SSE2 optimizations in LV Application Builder when LabVIEW components used in Multisim were compiled. For more information, please read KB 60CCP0XL: I Get LV-related Error Messages When Opening Multisim in a Pentium III Machine.
[*]Multisim leaks GDI resource handles when used over extended periods of time, eventually leading to unpredictable user interface behaviour and crashes. This is an issue with MFC applications running on Windows XP SP2 and Windows Server 2003. For more information and workarounds, refer to KB 4JREGSXL:Multisim or Ultiboard Leaking GDI Resource Handles.
Release Notes
[*]The "snippet" feature includes code from libpng 1.4.3, licensed by a third party or parties pursuant to the libpng license. For more information, refer to Notifications.pdf at ... \National Instruments\Multisim Component Evaluator 12.0\Licenses\.
Bug FixesThe following is a subset of the issues fixed between Multisim Component Evaluator 12.0. and Multisim Component Evaluator 12.0.1.
Multisim ( 33 )
Bug IDDescription
363133Expand/collapse tree items in Rename/Renumber dialog may crash in some cases.
360449Power variable should not appear in the analysis variables list.
349258Simulation throws errors found by the netlist generator after using the In Use List.
348533Right-click does not cancel wiring unless the first junction has been placed/connected.
348103Some long equation models may cause simulator failures.
347337Thermal noise source doesn't accept values from the dialog.
346778Pulse current source not generating correct output in some cases.
343779Noise analysis is generating incorrect spice statement.
342877New wire names are in random order when using drag drop a component to link a set of pins.
342841Incorrect pin assignment in the NI-sbRIO-9605 and NI-sbRIO-9606 symbols.
335504Time delayed switch gives incorrect results.
335288Autowire component on move list box in the Global preferences allows for invalid values to be entered.
329492Relay doesn't behave as expected in some cases.
328669Grid does not appear in Multisim for some magnifications.
327944Adding spaces before component names using Multisim's component search yields no results.
326744Multi-select deleting empty rows in digital Grapher doesn't delete the selections.
325947Deleting a wired up component causes net names to get mixed up in some cases.
324614Aligning parts with wires sometimes aligns them to the edge of the design.
321970F1 doesn't go to the right topic for the text block.
321715Automatic wiring produces scrambled paths when connections are too close.
318565Using Undo after searching the component browser will not restore the browser to the previously selected family and group.
317110Pressing the Escape key In Component Wizard Quits Without Prompting.
315848"Auto Resize" changes comments so that they are cut off.
314297Short Fault does not allow more than 2 shorted connections.
313574Digital Clock and Digital Ground do not work together in purely digital circuits.
301516The schematic symbol for the NDS8858H is incorrect.
296710Multisim is slow when wiring to a component with high pin count.
274870Dummy pin names showing up for connectors.
274775Canceling the action to create a floating wire on schematic, will leave a floating junction behind.
274530Multisim leaves junctions behind if user cancels place wire command.
372125Printing unsaved designs or the spreadsheet view does not work in Windows 8.
377814Noise analysis does not appear in Analyses toolbar.
358660Japanese installer has duplicate text in the destination directory description.
Database ImprovementsThis edition of Multisim Component Evaluator includes 80+ new Analog Devices components, including 14 new simulation models, 56 new simulation-only photodiodes (models provided by Analog Devices), and 70+ new NI components, including GPIB, M-series DAQ, and connectors.Refer to NI Multisim Component Evaluator Analog Devices Edition Components for a detailed list of the components included in Multisim Component Evaluator Analog Devices Edition.How to Use NI Software with Microsoft Windows 8When you install National Instruments software on Microsoft Windows 8, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products such as NI LabVIEW, and the Measurement & Automation Explorer (MAX).
NoteUnlike previous versions of Microsoft Windows, MAX does not appear as a desktop shortcut. You can launch MAX from the Start screen.
Pinning Frequently Used ApplicationsFor convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:
Current ApplicationIcon LocationPin to Action
Windows 8 DesktopDesktop TaskbarRight-click application and select Pin to Taskbar
Windows 8 DesktopStart screenRight-click application and select Pin to Start
Windows 8 Start screenDesktop TaskbarRight-click application and select Pin to taskbar from the menu bar on the bottom of the screen
Finding All ProgramsIf you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files by right-clicking anywhere on the Start screen and selecting All apps. A list of all installed software and related files appears, in alphabetical order by creator or type.Important InformationCopyright© 2007–2012 National Instruments. All rights reserved.National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
[*]Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
[*]EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
[*]Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
TrademarksNational Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments. Electronics Workbench, Multisim and Ultiboard are trademarks of National Instruments. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.Other product and company names mentioned herein are trademarks or trade names of their respective companies.The EKV MOST model used in this software was developed, implemented and tested by the Electronics Laboratory (LEG) of the Swiss Federal Institute of Technology (EPFL).Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
页:
[1]