TA的每日心情 | 奋斗
3 小时前 |
|---|
签到天数: 3387 天 连续签到: 9 天 [LV.Master]2000FPS
|
楼主 |
发表于 2024-10-30 14:30:20
|
显示全部楼层
|阅读模式
来自：广东省东莞市 电信
注册登陆后可查看附件和大图，以及购买相关内容
您需要 登录 才可以下载或查看，没有账号？注册会员
x
NI RFmx VNA 2024 Q4 Win11 64bitENG RFmx矢量网络分析仪24.8.0
RFmx VNA
RFmx VNA可通过PXIe-5633矢量网络分析仪(VNA)测量单端口或双端口S参数。
RFmx VNA是一款测量专用软件，扩展了NI RF仪器软件的功能，可帮助您使用PXIe-5633矢量网络分析仪测量散射参数（S参数）。借助RFmx VNA，您可以对典型RF前端模块中的RF组件（如放大器、天线、滤波器、衰减器和其他DUT）执行复杂的单端口和2端口S参数测量。
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI RFmx VNA 2024 Q4
发布日期：2024/10/8
包含的版本：2024 Q4完整版/运行版，版本号24.8.0
受支持的操作系统：
Windows 11
Windows Server 2022 64-bit
Windows 10 64-bit
Windows Server 2019 64-bit
语言：English
应用程序位数：64位
64位完整版校验和：
文件大小: 2140813312 字节 (1.99 GB)
修改日期: 2024-10-17 11:39
MD5: f72caf71115f6fc483301e9182a9d4b2
SHA1: d4579e9affc2d0fa5b7fbc9b38732ac378414aa7
SHA256: 34d84bae1081dca64b5d871bbe1e2401677a0c74288d3a389e43ec25c4c8aa9d
CRC32: fef8e17f
百度网盘和NI官方下载地址：
请注册登录视觉机器论坛用户，购买附件查看下载地址
RFmx VNA2024Q4RTE.txt
(639 Bytes, 下载次数: 0, 售价: 5 元)
64位运行版校验和：
文件大小: 856432640 字节 (816.76 MB)
修改日期: 2024-10-17 11:37
MD5: ad8a61dbef67c4013e47d3b989580b30
SHA1: 184e0fb6adf760b6f77cb0ba354a35872237f56a
SHA256: 01458ef04c0abc79205df6f6031c6afe6ec4ae8dfc6dcf644768e687a3976d4b
CRC32: fcd8ee08
百度网盘和NI官方下载地址：
请注册登录视觉机器论坛用户，购买附件查看下载地址
RFmx VNA2024Q4Full.txt
(591 Bytes, 下载次数: 0, 售价: 10 元)
RFmx VNA 2024 Q4 New Features and Changes
New Features
- Support to specify polar format for S-parameters and Waves.
- Support to query S-parameters and waves in concise notation.
- Support for interpolation of corrected S-parameters and waves measurements.
- Support to query correction state.
Changes
- The following fetch VIs are deprecated:
- RFmxVNA SParams Fetch Real Data.vi
- RFmxVNA SParams Fetch Complex Data.vi
- RFmxVNA Waves Fetch Real Data.vi
- RFmxVNA Waves Fetch Complex Data.vi
- TipUse the following VIs to fetch measurement data:
- RFmxVNA SParams Fetch Y Data.vi
- RFmxVNA Waves Fetch Y Data.vi
TipUse the following VIs to fetch measurement frequency:- RFmxVNA SParams Fetch X Data.vi
- RFmxVNA Waves Fetch X Data.vi
- The PXIe_DStarB option for Pulse Generator Trigger terminal export is deprecated.NoteUse PXIe_DStarC instead.
- The Undefined Thru Using Defined Thru option for Correction:Calibration:Thru:Method is deprecated.
- The Delay Thru Using Defined Thru option for Correction:Calibration:Thru:Method has been replaced by vCal Thru as Unknown Thru
RFmx VNA 2024 Q3 New Features and Changes
New Features
- Support for List, Linear, and Segmented Sweep types
- Support for exporting S-parameter measurement results as SnP files
- Support for SWR, Impedance, and Admittance formats for S-parameters
- Support for exporting Pulse Generator events
- Support for aborting an ongoing calibration step
Behavior Changes
- Deprecated RFmxVNA Configure Frequency List (Start Stop Points).vi.NoteTo work around this change, configure Sweep Type to Linear, and configure Start Frequency (Hz), Stop Frequency (Hz), and Number of Frequency properties.
- You can no longer obtain the underlying list of aggregated frequencies across all active segments using the Sweep:Frequency List attribute.NoteUse the Sweep:X-Axis Values read-only attribute instead.
- The Complex format in InstrumentStudio is no longer plotted as a Smith Chart. It is now plotted as a polar chart.NoteTo plot a Smith chart, set the format to Smith Impedance or Smith Admittance.
RFmx VNA 2024 Q2 New Features and Changes
- Support for external triggers for VNA measurements
- Support for saving and loading stimulus settings along with Calset
- Support for enabling and disabling automatic scaling down of Intermediate Frequency Bandwidth (IFBW) at low frequencies for measurement speed
- Support for caching multiple signal switch for measurement speed
- Support for guided calibration using Mechanical Calkits defined by NI Calkit files (.nckt )
- Support for basic pulsed S-parameter and waves measurements with internal pulse-trigger
- Support for embed fixtures to Calsets
- Support for creating and editing Calkit files for Mechanical Calkits using the standalone Calkit Editor application.
- Obsoleted the RFmxInstr Load All Configurations VI. Use the RFmxInstr Load Configurations VI along with the appropriate RFmxInstr Load Options property, instead.
RFmx VNA 2024 Q1 New Features and Changes
- Calibration: User-defined orientation for Cal-5501
- Calsets
- Load one or more named calsets from calset files previously saved
- Select an active calset from the pool of loaded named calsets
- Query the names of all loaded named calsets
- Create a named copy of another named or unnamed calset
- Query the error terms stored in a calset
- Support for RFmxVNA SParams and RFmxVNA Waves measurements to perform as composite measurements
- Added port extension support to specify electrical-length as delay (in seconds) and compensate for constant loss
- IVI simulation support for PXIe-5633
RFmx VNA 2023 Q4 Features Overview
- Measure corrected and uncorrected 1-port or 2-port S-parameters and receiver waves for non-frequency-converting RF devices over a list of frequencies
- Fixture de-embedding
- Point averaging
- Automatic Short-Open-Load (SOL) and Short-Open-Load-Through (SOLT) calibration using Cal-5501 Vector Calibration Module
- Saving and loading calibration error terms as a calset file
- Support for PXIe-5633
- Support for obtaining unprocessed I/Q data utilized for RFmx measurements
|
|
