NI Vision Builder for Automated Inspection 2011 Win32Eng 自动检测视觉生成器VBAI2011 LabVIEW2011版适用

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI Vision Builder for Automated Inspection 2011 Win32Eng 自动检测视觉生成器VBAI2011 LabVIEW2011版适用
NI机器视觉、图像处理软件。不需要学习太多编程知识，即时使用验证。可脱离LabVIEW编程平台，独立完成检测任务。可应用于NI智能相机、嵌入式视觉平台等。石鑫华视觉珍。百度网盘下载与NI官方下载：
NI Vision Builder for Automated Inspection 2011 VBAI2011(2011.8.2)

百度云盘下载：
ZIP版：
链接: 请注册视觉论坛会员登录后购买附件下载查看
提取码: 购买附件下载查看
ISO版：
链接: 请注册视觉论坛会员登录后购买附件下载查看
提取码: 购买附件下载查看

NI官方下载地址（可能无效或无法下载完成）：
购买附件下载查看

VBAI2011.txt (446 Bytes, 下载次数: 22, 售价: 10 元)

2020-2-13 00:42 上传

点击文件名下载附件
VBAI2011

NI Vision Builder for Automated Inspection 2011 Readme

August 2011

This file contains important information about National Instruments Vision Builder for Automated Inspection (Vision Builder AI) software and is organized into the following sections:

System Requirements
Installation Instructions
Activation Instructions
New Features
Remote Target Support
PC-Based Image Acquisition and I/O Support
Known Issues
Additional Resources

System Requirements

To configure inspections using Vision Builder AI, the host machine must meet the following requirements:

	Minimum	Recommended
Processor	Pentium 4/M or equivalent	Core Duo or equivalent
Memory	512 MB RAM	1 GB RAM
Display	1,024×768 resolution video adapter with a 24- or 32-bit display	1,280×1,024 resolution video adapter with a 24- or 32-bit display
Operating System	Microsoft Windows 7/Vista/XP/Server 2003 R2 (32-bit)/Server 2008 R2
Browser	Microsoft Internet Explorer 5.0 or later
Hard Disk Space	1 GB

Installation Instructions

Complete the following steps to install Vision Builder AI:

Note: You must be logged in with administrator privileges to install Vision Builder AI.

• Insert the Vision Builder AI DVD into your DVD-ROM drive. If the DVD does not run automatically, open Windows Explorer, right-click the DVD drive icon, and select AutoPlay.
• Select Install Vision Builder for Automated Inspection on the National Instruments Vision Builder for Automated Inspection screen.
• Vision Builder AI prompts you to enter your user information. Select one of the following options:
  
  • Install this product using the following serial number
  • Install this product for evaluation
    
  If you choose to enter a serial number, enter the serial number found on your Certificate of Ownership card. Vision Builder AI automatically uses this serial number when you run the NI Activation Wizard.
• Continue to follow the instructions on the screen.
  

Activation Instructions

If you do not activate a valid license, Vision Builder AI runs in evaluation mode and continues to prompt you to activate a license on each launch.

The evaluation period is 30 days. At the end of the evaluation period you must activate a Vision Builder AI license to continue using the product.

Note: While Vision Builder AI is in Evaluation mode, all features are available except Migrate Inspection to LabVIEW.

Complete the following steps to activate the Vision Builder AI license:

• Launch Vision Builder AI.
• Click Yes when prompted to activate Vision Builder AI.
• Ensure that Automatically activate through a secure Internet connection is selected, and click Next.
• Enter your serial number, and click Next.
• Enter your registration information, and click Next.
• You can enter an email address to receive a copy of the activation code for your records.
  

Deployment Policy for Vision Builder AI

Pursuant to the National Instruments Software License Agreement, Vision Builder AI software is licensed to run on only one machine. Deployed applications that use Vision Builder AI require that Vision Builder AI be installed and licensed on each host machine. Therefore, you must purchase a separate Vision Builder AI license for each host machine. For more information, refer to the enclosed National Instruments Software License Agreement or visit ni.com/legal/license.

Licensing Options

Vision Builder AI offers the following licensing options:

• Vision Builder AI Full-Featured (778649-01)—Allows full access to all Vision Builder AI features, which can be used to configure, benchmark, and deploy inspections. This license does not include the Vision Builder AI Development Toolkit.
• Vision Builder AI Run-Time (779799-03)—Allows you to deploy existing inspections to a host machine and modify the control values for steps in an inspection. This license does not allow you to add steps to or remove steps from an inspection.
• Vision Builder AI Development Toolkit (779343-03)—Licenses only the Vision Builder AI Development Toolkit, which allows you to create custom steps for use in any Vision Builder AI application.
  

New Features

The following list describes the changes and enhancements in this release of Vision Builder AI:

• NI 177x Smart Camera support. Use the Acquire Image (Smart Camera) step to configure an acquisition and acquire images from any NI 177x Smart Camera.
• New Max Caliper step. Use the Max Caliper step to obtain precise maximum distance measurements based on contour extraction.
• Updated calibration features. Vision Builder AI now supports spatial calibrations that model perspective distortion, rectilinear lens distortion, or camera model parameters such as focal length and optical axis position. You can access the NI Calibration Training Interface from the Calibrate Image step or from the Calibration tab on any acquisition step.
• New C API. Use the C API to control Vision Builder AI from C and C++ development enviroments, such as LabWindows/CVI, or .NET development environments, such as Microsoft Visual Studio 2005 or 2008.
• Updated Welcome Screen. The Vision Builder AI Welcome screen has been updated. Use the icons to the right of the target list to manage a selected target:
  
  • Refresh Target List—Refresh the list of available remote target devices.
  • Add Target—Add a new remote target device to the list.
  • Add Simulated Target—Add a simulated remote target device to the list of targets. Use a simulated to develop an inspection for deployment when the actual remote target is not available.
  • Configure Target—Configure the selected remote target device.
    
  
  

Updates

The following list describes issues in previous versions of Vision Builder AI that are fixed in this release.

ID	Fixed Issue
87420	If you click Run Once while editing the Match Pattern step, the step does not reposition the region of interest.
254434	Vision Builder AI returns an error message if you try to edit an Image Acquisition step after using a template to create a new inspection for a NI-IMAQ framegrabber while a camera is not connected.
256019	In the Vision Assistant step, the Multiply Divide operator does not work as expected.
256156	In the Vision Assistant step, the operator functions return an error if you supply two images of different types, even if the images are the same size.
256177	Initial Step Size and Final Step Size values are always reset to 1 when editing the Detect Texture Defect step.
257054	Pressing produces a response when editing the State Diagram, even if Vision Builder AI is not the active window.
257928	If a Run LabVIEW step running on a remote target calls a broken VI, the step returns error messages that cannot be interrupted without restarting Vision Builder AI.
275942	Changing remote target settings on the Date & Time tab have no effect.
276327	When using the Vision Builder AI LabVIEW API, opening the inspection can take more than 30 seconds on Windows if a mapped network drive is not reachable.
276332	The Read/Write (NI-IMAQ I/O) step does not detect changes for isolated input lines 8, 9 or 10.
277593	When migrating an inspection with a custom user interface to LabVIEW on a Windows operating system, the behavior of the resulting front panel is set to modal.
278449	Some Inspect Contours step results are not available in the Geometry step.
281223	You must reboot the device after changing the serial baud rate for a compact vision system in order for the change to take effect.
282521	The Data Logging step does not work properly after migrating an inspection to LabVIEW when the Log as Backround Task checkbox is enabled.
283246	The Image Logging step does not work properly after migrating an inspection to LabVIEW when the Log as Backround Task checkbox is enabled.
283355	In the Calculator step, the context menu does not appear when you right-click an existing function.
283579	When using the Vision Builder AI LabVIEW API, the Result Timestamp is identical for all results.
284838	In the VBAI Custom Overlay step, element names revert to original values after editing an element name and closing the step.
284907	When a Serial I/O step is inserted in the Select Inspection state, Serial I/O steps in other inspection states use the default baud rate.
285726	Maximizing VBAI when using dual displays might crop the right portion of the window.
288549	It is impossible to close the error message after trying to open the same inspection in multiple instances of Vision Builder AI.
290648	It is impossible to create custom Vision Builder AI steps after installing a Vision Development Module service pack.
292846	When using the Vision Builder AI LabVIEW API, the Vision Builder AI communication device server closes when the connection to the Vision Builder AI Engine is closed.
295365	In the Find Circular Edge step, the Edge Strength graph is not populated properly.
299239 309030	When using a Japanese-language operating system, In the Read/Verify Text step, recognized Japanese character text is not displayed properly in the Char column of the results table on the Limits tab.
304702	It is possible to create an inspection where the calibration is unusable if the inspection is opened on another device.
306858	After running an inspection that contains a Serial I/O step in the Select Inspection state from the Inspection Interface, the Serial I/O step does not function in the Configuration Interface.
307322	When using a Japanese-language operating system, Japanese characters are not displayed correctly on the Vision Builder AI Welcome screen.
307456	When opening the Adv. Straight Edge step with the Suggest Values checkbox enabled while operating on a large image, Vision Builder AI might exceed 10 % CPU usage.
307628	The Vision Builder AI LabVIEW API unnecessarily attempts to load dll files for features that are not installed.

Remote Target Support

You can use Vision Builder AI to remotely configure and control a supported remote target. Vision Builder AI supports the following remote targets:

• NI 17xx Smart Cameras
• NI 177x Smart Cameras
• NI CVS-1450 Series Compact Vision Systems
• NI EVS-1463RT Embedded Vision Systems
• NI EVS-1464RT Embedded Vision Systems
  

To use Vision Builder AI with a remote target, you must use Vision Builder AI to configure the remote target. For more information about using Vision Builder AI to configure the remote target, refer to the documentation included with the remote target.

The following table illustrates when a remote target requires you to install driver software on the development computer.

Remote Target Camera Type	Requires Driver Software Installed on Development Computer
NI Smart Camera	No
IEEE 1394	No
GigE Vision	No
Camera Link	Yes

Note: To acquire images from a Camera Link camera attached to a NI EVS-1463RT device, you must use MAX to associate a camera file with the camera. For information about how to associate a camera file with a Camera Link camera connected to a remote target, visit ni.com/info and enter the info code rtcamerafile.

---

PC-Based Image Acquisition and I/O Support

Vision Builder AI supports the following image acquisition and I/O devices:

• National Instruments image acquisition devices
• IEEE 1394 industrial digital cameras
• GigE Vision cameras
• DirectShow-compatible USB cameras
• IP cameras
• digital or analog I/O from NI data acquisition (DAQ) devices
• serial devices
  

Note: You must install driver software to acquire images from an image acquisition device connected to the development computer.

National Instruments Image Acquisition Devices

This version of Vision Builder AI supports the following National Instruments image acquisition devices:

NI PCI-1405 NI PXI/PCI-1407 NI PXI/PCI-1409 NI PXI/PCI-1410

NI PXI/PCI-1411 NI PXI/PCI-1422 NI PCI-1424 NI PCI-1426

NI PCIe-1427 NI PXI/PCI-1428 NI PCIe-1429 NI PCIe-1430

NI PCIe-1433 NI PXIe-1435

Note: If you are using an image acquisition device, you must install NI Vision Acquisition Software before you install the image acquisition device. NI Vision Acquisition Software gives you access to Measurement & Automation Explorer (MAX), which is software you can use to configure National Instruments devices.

IEEE 1394 Cameras, GigE Vision Cameras, DirectShow-Compatible USB Cameras, and IP Cameras

Vision Builder AI supports IEEE 1394 cameras, GigE Vision cameras, DirectShow-compatible USB cameras, and IP cameras. To acquire an image from one of these camera types when the camera is connected to the host computer, use the Acquire Image (1394, GigE, or USB) step. The Acquire Image (1394, GigE, or USB) step requires NI-IMAQdx, which can be installed from the NI Vision Acquisition Software DVD included with Vision Builder AI. The following table lists the minimum version of NI-IMAQdx required for each camera type:

Vision Builder AI Camera Support

Camera Type	Minimum Required NI-IMAQdx Version	Supported NI Host Adapters
IEEE 1394 Cameras	3.0	NI PXI/PCI-8252, NI PCI-8254R, NI PCIe-8253, NI PCIe-8255R
GigE Vision Cameras	3.0	NI PCIe-8231, NI PCIe-8235, NI PXIe-8234
DirectShow-Compatible USB Cameras*	3.4	—
IP Cameras	3.5	—
*Verify that the camera driver supports DirectShow and that the camera driver is installed correctly. For specific information about drivers and camera compatibility, consult your camera manufacturer documentation.

You must configure an IEEE 1394 camera to use the NI-IMAQdx driver. Complete the following steps to use MAX to configure an IEEE 1394 camera to use the NI-IMAQdx driver.

• Launch MAX.
• In the MAX configuration tree, expand Devices and Interfaces to obtain a list of installed devices.
• Expand NI-IMAQdx Devices to obtain a list of available cameras.
• Right-click the camera and select Driver»NI-IMAQdx IIDC Digital Camera.
  

National Instruments no longer supports Legacy NI-IMAQ for IEEE 1394 Cameras driver software. Installing NI-IMAQdx from the NI Vision Acquisition Software DVD included with Vision Builder AI uninstalls Legacy NI-IMAQ for IEEE 1394 Cameras driver software. If you have an existing inspection that uses the Acquire Image (IEEE 1394) step or you want to use the Acquire Image (IEEE 1394) step to acquire images from an IEEE 1394 camera connected to the host computer, you must download and install Legacy NI-IMAQ for IEEE 1394 Cameras driver software. Visit ni.com/info and enter the info code legacy1394 for information about how to install Legacy NI-IMAQ for IEEE 1394 Cameras driver software.

Note: The Vision Builder AI software image for the NI CVS-1450 Series Compact Vision System includes all necessary driver software. You do not need to download and install Legacy NI-IMAQ for IEEE 1394 Cameras driver software to configure a CVS-1450 Series Compact Vision System.

NI Analog and Digital I/O Devices

This version of Vision Builder AI supports digital and analog I/O from any National Instruments data acquisition (DAQ) device using NI-DAQmx Global Virtual Channels. To support NI DAQ devices, Vision Builder AI requires NI-DAQmx 8.0 or later.

Serial Communication

To support serial communication, Vision Builder AI requires NI-VISA 2.6.0 or later, which is included with Vision Builder AI. You can use the serial ports built into the PC or one of the following NI serial interfaces: NI PCI-232/x, NI PXI-8420/x, or NI PXI-8422/x. You do not need to install NI-VISA to use the serial port on a remote target.

---

Known Issues

National Instruments is aware of the following issues you may encounter while using Vision Builder AI.

General

• Vision Builder AI does not support U16 images.
• Vision Builder AI behaves unexpectedly or may not display an inspection image if the image is large and your computer is low on available memory.
• If you configure a step to generate a status based on pixel values and subsequently calibrate the image, the step will compare calibrated values against pixel-based limits and might fail.
• The Geometric Matching step generates an initialization error if the range specified for Scaled matches is large enough to cause the target to run out of memory.
• When connected to a remote target in the Configuration interface, the TCP Communication Terminal is not updated if you select an Operate»Run Inspection option.
• When connected to a remote target in the Configuration interface, the Serial Communication Terminal is not updated if you select an Operate»Run Inspection option.
• Calculator step performance may decrease if the Display Result Image for this State checkbox is enabled.
• The number of logged images resets if an inspection that contains an Image Logging step is closed and opened.
• When connected to a remote target, the Configuration interface does not execute the Cleanup state.
• After connecting to a remote target and starting an inspection in the Vision Builder AI Configuration interface, if you lose communication and reconnect to the target the inspection opens in the Vision Builder AI Inspection interface.
  

LabVIEW Project Integration

• You can create a new VI in the context of a remote target added in Vision Builder AI Mode. A VI created in this context cannot run or support shared variables. If you try to add a shared variable to the VI, the VI generates an error message indicating that the target does not support shared variables. Always create a VI in the context of My Computer or a remote target added in LabVIEW Real-Time Mode.
• When you add a NI Smart Camera or NI 1460RT Series Embedded Vision System to a LabVIEW project in Vision Builder AI Mode and the target and development computer are located on different subnets, shared variables are not automatically listed for the target. To list shared variables, right-click the target and select Connect.
  

Vision Builder AI Development Toolkit

• When using the Vision Builder AI Development Toolkit, you must close all open LabVIEW VIs before attempting to create a new step or importing a step from a previous version of Vision Builder AI.
  

---

Windows Firewall

If you are using the Windows Firewall, you may notice the following behavior:

• Microsoft Windows 7, Windows Vista, Windows Server 2008, Windows Server 2003, or Windows XP with Service Pack 2 (SP2) or later installed
  When you launch Vision Builder AI, a dialog box may prompt you to allow Vision Builder AI to receive information over the network. Depending on your operating system, select Allow access or Unblock this program so that Vision Builder AI can communicate with your remote target.
• Microsoft Windows XP with Service Pack 1 (SP1) installed
  If the Microsoft Windows XP Internet Connection Firewall (ICF) is enabled, Vision Builder AI cannot discover or configure remote targets unless you disable the ICF. Perform the following steps to disable the Internet Connection Firewall:
  
  • From your desktop, open Network Connections by selecting Start»Control Panel»Network Connections.
  • Double-click the connection you want to modify.
  • Click Properties.
  • On the Advanced tab, clear the Protect my computer and network by limiting or preventing access to this computer from the Internet checkbox.
    
  
  

---

Additional ResourcesHow do I get started?

Read the NI Vision Builder for Automated Inspection Tutorial, which provides exercises for learning how to perform basic machine vision techniques using Vision Builder AI.

Where can I find reference information?

Reference information for Vision Builder AI is available from within Vision Builder AI by clicking the Show Context Help button, or selecting Start»All Programs»National Instruments»Vision Builder AI»Documentation.

The following documents are provided with Vision Builder AI as online help:

• NI Vision Concepts Help—Contains basic concepts of image analysis, image processing, and machine vision. This document also contains in-depth discussions about imaging functions for advanced users.
• NI Vision Builder for Automated Inspection: Configuration Help—Contains information about the Vision Builder AI Configuration interface, managing inspections and images, and creating steps for an inspection.
• NI Vision Builder for Automated Inspection: Inspection Help—Contains information about using the Vision Builder AI Inspection interface to run inspections.
• NI Vision Builder for Automated Inspection: ActiveX Component Reference Help—Contains information about the ActiveX objects available to embed Vision Builder AI inspections into ActiveX applications.
  

Use the Search tab in the help files to quickly locate specific information. For information about how to use the search functionality, refer to the Using Help»Searching Help topic in the help file.

The following documents are provides with Vision Builder AI as Adobe PDF documents:

• Vision Builder for Automated Inspection Tutorial—Describes Vision Builder for Automated Inspection and provides step-by-step instructions for solving common visual inspection tasks, such as inspection, gauging, part presence, guidance, and counting.
• NI Vision Builder for Automated Inspection Development Toolkit Tutorial—Contains instructions for using LabVIEW to create custom steps for Vision Builder AI.
  

Where can I find examples?

Examples of common Vision Builder AI inspections are installed to the \Examples directory, where is the location to which you installed Vision Builder AI.

Where else can I go for Vision Builder AI information?

Visit ni.com/vision and the NI Developer Zone at ni.com/zone for the most up-to-date information about Vision Builder AI.

---

Copyright

© 2002–2011 National Instruments Corporation. All right reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

Trademarks

National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Members of the National Instruments Alliance Partner Program are business entities independent from National Instruments and have no agency, partnership, or joint-venture relationship with National Instruments.

Patents

For patents covering the National Instruments products, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your DVD, or ni.com/patents.

kuner

:):):):):):)谢啦

liyixun

过来看看还能不能愉快的下载了