注册登陆后可查看附件和大图，以及购买相关内容
您需要 登录 才可以下载或查看，没有账号？注册会员
x
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI-RIO 3.2.1旧版设备驱动Windows系统32位Eng/Jpn完整版
NI-RIO（旧版）
NI-RIO用于为可重配置硬件设备提供支持。
NI-RIO是一个设备驱动，用于支持可重配置I/O (RIO)硬件的识别、编程和部署。它为CompactRIO模块、多功能可重配置I/O设备、PXI多功能可重配置I/O模块和FlexRIO仪器提供了支持。
3.2.1
文件大小: 1205125477 字节 (1.12 GB)
修改日期: 2014-08-28 02:27
MD5: 9b74ed0958e63805e7f79df3821949e6（官方正确）
SHA1: 2115cb7eff45b7e56b9bd991222f393c2594d1ac
SHA256: e965f6a454d572e90a4c815172fd7b9988aff01adff0874f56f32acb29230adb
CRC32: 68f00788
NIRIOWin3.2.1.txt
(286 Bytes, 下载次数: 0, 售价: 10 元)
NI-RIO 3.2.1 ReadmeAugust 2009 ni.com/support This file contains important information about NI-RIO 3.2.1, including information on installing NI-RIO 3.2.1, descriptions of known issues for installing and using NI-RIO 3.2.1, and information about the hardware and software supported by NI-RIO 3.2.1.
- Installing NI-RIO 3.2.1
- Bug Fixes in NI-RIO 3.2.1
- Known Issues for Using NI-RIO 3.2.1
- No Support for LabVIEW 8.0.x
- No Support for LabVIEW 7.x
- Supported Platforms
- Supported Hardware and Software
Installing NI-RIO 3.2.1Complete the following steps to install NI-RIO 3.2.1 for use with LabVIEW FPGA 2009. - Install LabVIEW 2009.
- Install LabVIEW Real-Time 2009.
- Install LabVIEW FPGA 2009.
- Install NI-RIO 3.2.1 using the two installation CDs or the NI Driver DVD.
Back to Top
Bug Fixes in NI-RIO 3.2.1Refer to the KnowledgeBase at ni.com for a list of bug fixes in this release. Back to Top
Known Issues for using NI-RIO 3.2.1Refer to the KnowledgeBase at ni.com for a current list of all known issues in this release. Back to Top
No Support for LabVIEW 8.0.xNI-RIO 3.2.1 does not support LabVIEW 8.0.x. If you are using LabVIEW 8.0.x, install NI-RIO 2.x. Back to Top
No Support for LabVIEW 7.xNI-RIO 3.2.1 does not support LabVIEW 7.x. If you are using LabVIEW 7.x, install NI-RIO 3.1.1 or earlier. Back to Top
Supported PlatformsNI-RIO 3.2.1 supports the following platforms: - Windows Vista Business (32-bit and 64-bit versions)
- Windows XP Professional
- Windows 2000 Professional (Service Pack 3 or higher)
Back to Top
Supported Hardware and SoftwareRefer to the NI Developer Zone at ni.com for a complete list of the hardware that is supported by this and previous versions of NI-RIO as well as what versions of LabVIEW software are supported by each version of NI-RIO. For additional CompactRIO product support and information, refer to ni.com/compactrio.
For additional R Series product support and information, refer to ni.com/dataacquisition/rseries.
For additional FlexRIO product support and information, refer to ni.com/flexrio.
Back to Top
Copyright © 2006–2009 National Instruments Corporation. All rights reserved. Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation. Trademarks National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks. Patents For patents covering the National Instruments products, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your CD, or ni.com/patents.
Back to Top | 
发表于 2020-10-28 20:32:01
