机器视觉论坛VISIONBBS_视觉之家VISIONHOME微信公众号:石鑫华视觉网

 找回密码
 注册会员
查看: 247|回复: 0

[NI驱动软件] NI FlexRIO Adapter Module Support 1.6 Driver Win32Eng NI FlexRIO适配器模块支持驱动软件1.6下载

[复制链接]
  • TA的每日心情
    难过
    昨天 09:56
  • 签到天数: 2251 天

    连续签到: 1 天

    [LV.Master]2000FPS

    发表于 2020-12-30 23:11:08 | 显示全部楼层 |阅读模式

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有帐号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件模块工具包驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Acvivator来激活,以下链接可下载:
    NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
    http://visionbbs.com/thread-490-1-1.html

    视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
    文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
    http://visionbbs.com/thread-26524-1-1.html

    NI FlexRIO Adapter Module Support 1.6 Driver Win32Eng NI FlexRIO适配器模块支持驱动软件1.6下载

    NI FlexRIO适配器模块支持
    NI FlexRIO Adapter Module Support为FlexRIO适配器模块提供LabVIEW支持。
    NI FlexRIO Adapter Module Support是一款驱动软件,可支持并访问FlexRIO适配器模块的I/O,包括数字化仪、收发仪、信号发生器、射频和DIO适配器模块。该软件还提供示例来帮助用户开始使用各种FlexRIO适配器模块。必须安装NI-FlexRIO才可使用该软件。

    Win32Eng
    1.6
    文件名: NI FlexRIO Adapter Module Support\FAMSupport16.zip
    文件大小: 53774734 字节 (51.28 MB)
    修改日期: 2010-04-29 20:29
    MD5: 6c01a71f95aa09f8f73dbcd134472173(官方正确)
    SHA1: 36db14858001ce01e0809b5841e491378cdc1ad8
    SHA256: 2fd4d985a348c952bfaabd416e90b0be3a1b5ebb5b326cfbf6e861c2116047b5
    CRC32: c29a6993

    百度网盘和NI官方下载地址:
    FlixeRIOAMS1.6.txt (604 Bytes, 下载次数: 0, 售价: 2 快钱)

    NI FlexRIO Adapter Module Support 1.6 Readme
    December 2009
    ni.com/support
    This file contains important information about the NI FlexRIO Adapter Module Support 1.6, including installation instructions and additional support information.

    • Installing NI FlexRIO Adapter Module Support 1.6
    • Supported Platforms
    • Additional Support

    Installing NI FlexRIO Adapter Module Support 1.6 with LabVIEW 8.6 Examples
    Complete the following steps to install NI FlexRIO Adapter Module Support 1.6
    • Install LabVIEW 8.6.1
    • (Optional) Install LabVIEW Real-Time 8.6.1
    • Install LabVIEW FPGA 8.6.1
    • Install NI-RIO 3.3
    • Install NI FlexRIO Adapter Module Support 1.6 using the installation CD.
    Back to Top

    Installing NI FlexRIO Adapter Module Support 1.6 with LabVIEW 2009 Examples
    Complete the following steps to install NI FlexRIO Adapter Module Support 1.6
    • Install LabVIEW 2009
    • (Optional) Install LabVIEW Real-Time 2009
    • Install LabVIEW FPGA 2009
    • Install NI-RIO 3.3
    • Install NI FlexRIO Adapter Module Support 1.6 using the installation CD.
    Back to Top

    Supported Platforms
    NI FlexRIO Adapter Module Support 1.6 supports the following platforms:
    • Windows 7 Professional (32-bit and 64-bit versions)
    • Windows Vista Business (32-bit and 64-bit versions)
    • Windows XP Professional
    • Windows 2000 Professional (Service Pack 3 or higher)
    Back to Top

    Additional Support
    For additional FlexRIO product support and information, please refer to ni.com/flexrio.
    Back to Top

    Copyright
    © 2006–2009 National Instruments Corporation. All rights reserved.
    Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
    Trademarks
    National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.
    Patents
    For patents covering the National Instruments products, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your CD, or ni.com/patents.
    Back to Top
    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|机器视觉论坛VISIONBBS.COM|视觉之家VISIONHOME.CN|东莞市华动智能科技有限公司 ( 粤ICP备17078359号-2 )|网站地图

    GMT+8, 2021-7-27 01:06

    Powered by shixinhua.com X3.4

    © 2009-2021 VISIONBBS.COM 浏览量:

    快速回复 返回顶部 返回列表