NI-SCOPE 3.8.1 Win32/64 Eng/Jpn NI示波器驱动程序SCOPE3.8.1

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI-SCOPE 3.8.1 Win32/64 Eng/Jpn NI示波器驱动程序SCOPE3.8.1

NI-SCOPE
NI-SCOPE为使用NI示波器产品的客户提供支持。
NI-SCOPE仪器驱动可帮助您进行多记录采集、连续采集、多板同步，并利用超过50个测量和分析函数以及传统示波器的功能。NI-SCOPE是一种兼容可互换虚拟仪器(IVI)的仪器驱动程序，提供了一系列操作和属性，可以执行波形或信号发生器的功能，并包含了交互式软件前面板和示例。

Win32/64Eng/Jpn
3.8.1
文件大小: 1513103072 字节 (1.41 GB)
修改日期: 2011-06-14 00:41
MD5: 168b508d872ba321f3f39694518043ef（官方正确）
SHA1: 26335fde7a37ded88cc509069e130bbb9d3927bd
SHA256: bfaa4fd16389328cfb652e102cdcbc534908167b1cfab64e0e25ff3ed03f1188
CRC32: b0b0f029

百度网盘与NI官方下载地址：
SCOPE3.8.1.txt (593 Bytes, 下载次数: 0, 售价: 10 圆)

2021-3-16 23:22 上传

点击文件名下载附件

NI-SCOPE ReadmeVersion 3.8

March 2011

Thank you for using NI-SCOPE. This file contains important information regarding NI-SCOPE and is organized into the following sections:

• New Features
• Supported Hardware
• System Requirements
• Installed File Names and Locations
• Installing/Uninstalling/Modifying NI-SCOPE
• Programming in NI-SCOPE
• Bug Fixes
• Known Issues
  

---

New Features in NI-SCOPE 3.8

• Added support for the NI PXIe-5185/5186, 12.5 GS/s high-speed digitizers
• Added support for including NI-SCOPE run-time in custom installers built using National Instrument Application Development Environments (ADEs). This installer contains instrument driver run-time components required to deploy applications using National Instruments high-speed digitizers.
  Notes:
  
  
  • The run-time installer does not contain support for interactively configuring or testing hardware using Measurement & Automation Explorer (MAX), NI LabVIEW Signal Express, or the NI-SCOPE Soft Front Panel.
  • The run-time installer does not support upgrading from NI-SCOPE 3.6.x or earlier and NI-DAQmx 8.9.x or earlier.
  • The run-time installer does not support the NI 5102, NI 5112, NI 5620, or NI 5621.
    
  
  

New Features in NI-SCOPE 3.7

• Added support in NI-TClk for the power edge trigger on the NI 5622.
  

---

Supported Hardware

The following table shows which hardware products are supported under particular operating systems.

Hardware Product	Windows XP	Windows Vista 32-Bit	Windows Vista 64-Bit	Windows 7 32-Bit	Windows 7 64-Bit
NI PXI/PCI-5102	Yes	Yes	No	Yes	No
NI PCMCIA/USB/AT-5102*	Yes	No	No	No	No
NI PXI/PCI-5105	Yes	Yes	Yes	Yes	Yes
NI PXI/PCI-5112	Yes	Yes	No	Yes	No
NI PXI/PCI-5114	Yes	Yes	Yes	Yes	Yes
NI PXI/PXIe/PCI-5122	Yes	Yes	Yes	Yes	Yes
NI PXI/PCI-5124	Yes	Yes	Yes	Yes	Yes
NI USB-5132/5133	Yes	Yes	Yes	Yes	Yes
NI PXI/PCI-5142	Yes	Yes	Yes	Yes	Yes
NI PXI/PCI-5152	Yes	Yes	Yes	Yes	Yes
NI PXI/PCI-5153	Yes	Yes	Yes	Yes	Yes
NI PXI/PCI-5154	Yes	Yes	Yes	Yes	Yes
NI PXIe-5185/5186	Yes	Yes	Yes	Yes	Yes
NI PXI-5620	Yes	Yes	No	Yes	No
NI PXI-5621	Yes	No	No	No	No
NI PXIe-5622	Yes	Yes	Yes	Yes	Yes
NI PXI-5900	Yes	Yes	Yes	Yes	Yes
NI PCI-5911*	Yes	No	No	No	No
NI PXI/PCI-5922	Yes	Yes	Yes	Yes	Yes
*NI PCMCIA/USB/AT-5102 and NI PCI-5911 are Legacy products.

Note: MXI-4 is supported on Windows XP and later. MXI-3 is supported only on Windows XP.

---

System Requirements

This section lists the minimum system and the recommended system for using NI-SCOPE.

Supported Operating Systems

NI-SCOPE 3.8 and later support the following operating systems:

• Windows 7 (32-bit and 64-bit)
• Windows Vista (32-bit and 64-bit)
• Windows XP (32-bit)
• Windows Server 2003 R2 (32-bit)
• Windows Server 2008 R2 (64-bit)
  

It is recommended that you have the most recent service pack for your operating system installed. Windows 2000 users must use NI-SCOPE 3.6 or earlier.

Supported Real-Time Operating Environments

NI-SCOPE 3.8 and later support the following real-time operating environments:

• LabVIEW Real-Time Module
• LabWindows™/CVI™ Real-Time Module
  

Minimum System Requirements

• Processor—Pentium III/Celeron 600 MHz or equivalent
• RAM—
  Windows XP: 128 MB
  Windows 7/Vista: 512 MB
• Microsoft Internet Explorer 5.5 or later
• A screen resolution of 800 x 600 with 256 colors
  

Recommended System

• Processor—Pentium 4 or equivalent
• RAM—
  Windows XP: 256 MB
  Windows 7/Vista: 1 GB
• A screen resolution of 1024 x 768
• One of the following application development environments (ADEs):
  
  • LabVIEW 8.5.1, 8.6.1, 2009 (32-bit), 2009(64-bit), 2010 (32-bit), or 2010 (64-bit)
  • LabVIEW Real-Time Module 8.5.1 or later (If you are running your application on an RT target, at least 128 MB of memory is required)
    Note: Not all devices are supported by the LabVIEW Real-Time Module.

    LabVIEW Real-Time Module Supported Hardware

    NI 5105

    NI 5114

    NI 5122

    NI 5124

    NI 5142

    NI 5152

    NI 5153

    NI 5154

    NI 5185

    NI 5186

    NI 5622

    NI 5900

    NI 5922

    
    
• LabWindows/CVI 8.1.1 or later
• LabWindows/CVI Real-Time Module (If you are running your application on an RT target, at least 128 MB of memory is required)
• Microsoft Visual C++ (MSVC) 6.0 or later
• Microsoft Visual Basic 6.0
  

---

Installed File Names and Locations

• National Instruments file folder location, :
  
  • Windows XP: Documents and Settings\All Users\Shared Documents\National Instruments
  • Windows 7/Vista: Users\Public\Documents\National Instruments
    
• National Instruments file folder location, :
  
  • Windows XP and Windows 7/Vista 32-bit: Program Files\IVI Foundation\IVI\
  • Windows 7/Vista 64-bit: Program Files (x86)\IVI Foundation\IVI\

    NOTES:	$(IVIROOTDIR32) is configured as an environment variable on the target system.
    	If you upgraded an installation of IVI, your files may be located in the following location: Windows XP and Windows 7/Vista 32-bit: Program Files\IVI\ Windows 7/Vista 64-bit: Program Files (x86)\IVI\

    
    
• National Instruments file folder location, :
  
  • Windows 7/Vista 64-bit: Program Files\IVI Foundation\IVI\

    NOTE:

    $(IVIROOTDIR64) is configured as an environment variable on the target system.

    
    
  
  

File Locations

Item	Installed Location on Windows XP/2000 and Windows 7/Vista 32-bit
NI-SCOPE	\Drivers\niScope
NI-SCOPE Function Panel	\Drivers\niScope\niScope.fp
NI-SCOPE Examples	\niScope\Examples
NI-SCOPE Header files	\Include
NI-SCOPE Import Library files (32-bit)	\Lib
NI-SCOPE Import Library files (64-bit)	\Lib_x64
NI-SCOPE DLL (32-bit)	\Bin
NI-SCOPE Firmware Updaters	Program Files\NI-DAQ\fpgafiles

Additional File Locations for Windows 7/Vista 64-bit

Item	Installed Location on Windows Vista 64-bit
NI-SCOPE Function Panel	\Drivers\niScope\niScope.fp
NI-SCOPE Header files	\Include
NI-SCOPE Import Library files (64-bit)	\Lib_x64
NI-SCOPE DLL (64-bit)	\Bin
NI-SCOPE Firmware Updaters	Program Files (x86)\NI-DAQ\fpgafiles

Documentation

Most documentation is available at Start»All Programs»National Instruments»NI-SCOPE»Documentation. The documentation set is composed of the following documents:

• NI High-Speed Digitizers Getting Started Guide
• NI High-Speed Digitizers Help
• Device Specifications
• Calibration Procedures
  

Note: Printed copies of device specifications are shipped with each device.

---

Installing/Uninstalling/Modifying NI-SCOPEInstalling NI-SCOPE

This section provides information on installing NI-SCOPE and NI-DAQ and upgrading from previous versions of NI-SCOPE.

NI-SCOPE installs NI-DAQ if it is not already installed, or if an earlier version of NI-DAQ is installed. NI-DAQ support files will be installed if you have LabVIEW or LabWindows/CVI in your system. However, the only component that NI-SCOPE needs from NI-DAQ is the device driver.

Upgrading from a Previous Version of NI-SCOPE

Upgrading from NI-SCOPE 1.0 and 1.1—NI-SCOPE does not install over NI-SCOPE 1.0 or 1.1. You must uninstall these versions of NI-SCOPE before installing a later version of NI-SCOPE.

Upgrading from NI-SCOPE 1.5 and later—NI-SCOPE automatically uninstalls any previous version that is greater or equal to 1.5. If you have modified any old examples, these will be overwritten by the new versions.

Uninstalling/Modifying NI-SCOPE

For Windows XP, complete the following steps:

• Launch the Control Panel by selecting Start»Control Panel.
• Double-click Add or Remove Programs.
• Select National Instruments Software.
• Click Change/Remove.
• Select NI-SCOPE 3.8 from the dialog box that appears.
• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

For Windows Vista, complete the following steps:

• Launch the Control Panel by selecting Start»Control Panel.
• Double-click Programs and Features.
• Select National Instruments Software.
• Click the Uninstall/Change button.
• Select NI-SCOPE 3.8 from the dialog box that appears.
• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

Do not attempt to uninstall by deleting files, which may be shared with other programs. The following additional software packages may have been installed as part of the NI-SCOPE installation. Exercise care when removing these packages because they may be used by other NI products:

• IVI Compliance Package 4.3
• NI-VISA 5.0
• NI-DAQmx 9.1.7
• Traditional NI-DAQ 7.4.4
• Measurement & Automation Explorer 4.7
• NI Hierarchical Waveform Storage 1.4.8
• NI Spy 2.7.2
  

---

Programming in NI-SCOPE

NI-SCOPE provides an intuitive, full-featured interface for programming your hardware. NI-SCOPE is IVI-Scope compliant. For more information, refer to niScopeIVIComplianceDocument.txt.

Software Examples

NI-SCOPE ships with several examples for LabVIEW, LabWindows/CVI, Measurement Studio, MSVC, Visual C++, and Microsoft Visual Basic that will help you develop your software. These examples illustrate how to perform the most common operations with your hardware. To find the examples, go to Start» Programs»National Instruments»NI-SCOPE»Examples.

NI-SCOPE Soft Front Panel

The NI-SCOPE Soft Front Panel (SFP) is a software oscilloscope application for NI high-speed digitizers. It has the following features:

• Familiar interactive user interface
• Robust architecture
• Scalar measurements
• Save/load waveforms
• Save/load configurations
• Low CPU usage
  

The NI-SCOPE SFP demonstrates some of the capabilities of NI high-speed digitizers and enables you to start using your new digitizer immediately without the need to know a programming language. The NI-SCOPE SFP is installed by default as a feature of the NI-SCOPE installation. To remove the NI-SCOPE SFP use the Add/Remove Programs option.

---

Bug Fixes

The following list contains changes from earlier versions of NI-SCOPE to NI-SCOPE 3.8. If you have a Bug ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of NI-SCOPE.

Bug ID	Fixed Issue
NI-SCOPE
258710	Fixed an issue where if you configured an acquisition and then called self-calibration with the same session, and then initiated another acquisition, the acquisition would use the old calibration data.
255378	Fixed an issue where the NI USB-5133 fetch rate was nearly 10 times slower after upgrading from NI-SCOPE 3.5.2 to in NI-SCOPE 3.6.
249733	Fixed a memory alignment issue introduced in NI-SCOPE 3.6.2 that adversely affected the performance of stream-to-disk operations.
249495	Fixed an issue where if you tried to perform continuous acquisition with the NI USB-513x and also configured a start trigger, the program would throw an error if a fetch was called before the acquisition began.
248516	Fixed an issue where one of the examples (niScope EX Simulated Acquisition) did not list all devices.
284933	Fixed an issue with the the calibration constants that were written to the EEPROM during external calibration of the NI 5622.

---

Known Issues

You can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in NI-SCOPE 3.8.

---

Copyright

© 1999–2011 National Instruments Corporation. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

Trademarks

CVI, LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.