机器视觉论坛VISIONBBS_视觉之家VISIONHOME微信公众号:石鑫华视觉网

 找回密码
 注册会员
查看: 361|回复: 0

[运行时与补丁] NI System Configuration 1.1.4 RTE Win32/64bit 中文/德语/日语/法语/英文/韩语 NI系统配置nisycfg1.1.4运行版

[复制链接]
  • TA的每日心情
    擦汗
    昨天 18:51
  • 签到天数: 2336 天

    连续签到: 8 天

    [LV.Master]2000FPS

    发表于 2021-3-19 23:21:43 | 显示全部楼层 |阅读模式

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有帐号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件模块工具包驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Acvivator来激活,以下链接可下载:
    NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
    http://visionbbs.com/thread-490-1-1.html

    视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
    文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
    http://visionbbs.com/thread-26524-1-1.html

    NI System Configuration 1.1.4 RTE Win32/64bit 中文/德语/日语/法语/英文/韩语 NI系统配置nisycfg1.1.4运行版

    System Configuration系统配置
    System Configuration包含了一些实用程序,使您可以监视和控制系统中的各种NI设备。
    System Configuration包含Measurement&Automation Explorer (MAX)、I/O Trace和Device Monitor。MAX是一个配置实用程序,用于访问NI设备。I/O Trace用于监测、记录和显示应用程序发出的NI API调用。Device Monitor可在系统检测到NI设备时启动应用程序。System Configuration支持LabVIEW和LabWindows/CVI等应用软件以及Microsoft Visual Studio和相关的编程语言。LabWindows标志经Microsoft公司授权使用。Windows是Microsoft公司在美国和其他国家的注册商标。

    Win32/64中文, 德语, 日语, 法语, 英文, 韩语
    1.1.4RTE
    文件名: System Configuration系统配置\Win\syscfg114runtime.zip
    文件大小: 54805771 字节 (52.27 MB)
    修改日期: 2019-06-25 03:15
    MD5: 919e9c8f1b9fe0133e887f18a5582702(官方正确)
    SHA1: 5b18a75e0e25dbe924d91e0c2734cb1fabdb74cc
    SHA256: 8fca26f93d298f494911f73f40fb318fd84f6fbbc8369798b6b6578e7cafc5d0
    CRC32: 3040eba9

    百度网盘与NI官方下载地址:
    SYSCFG Win 1.1.4RTE.txt (643 Bytes, 下载次数: 0)

    NI System Configuration 1.1 Readme
    NI System Configuration 1.1 also includes Measurement & Automation Explorer (MAX) 4.7 and NI Network Browser 1.1. This file contains important information about NI System Configuration 1.1 and included products.

    Contents
    Installing System Configuration 1.1
    Supported Platforms
    Using System Configuration 1.1
    Supported Development Environments
    Using Measurement & Automation Explorer 4.7
    Supported Development Environments
    Using Network Browser 1.1
    Supported Browsers
    Known Issues and Bug Fixes
    Licenses and Notices

    Installing System Configuration 1.1
    To install System Configuration 1.1 and included components, run setup.exe on your Windows host machine. To install onto a Real-Time OS, use the LabVIEW Real-Time Software Wizard in Measurement and Automation Explorer from your local system. Visit ni.com/support for the latest version of System Configuration.
    Supported Platforms
    System Configuration 1.1 and components support the following platforms:
    • Windows XP
    • Windows Vista x86, x64
    • Windows 7 x86, x64
    • Windows Server 2003 R2 (x86) 1,2
    • Windows Server 2008 R2 (x64) 1
    • VxWorks 6.3
    • PharLap 2010, 2009, 8.6, 8.5
    1 System Configuration does not support non-R2 versions of Windows Server.
    2 Support for Windows Server 2003 R2 may require disabling physical address extensions (PAE). To learn how this might affect your use of Windows Server 2003 and what actions you might have to take, visit ni.com/info and enter the Info Code PAESupport.
    Using System Configuration 1.1
    System Configuration 1.1 contains an application programming interface (API) that can be used to programmatically control various National Instruments devices in a system. The following sections describe this API.
    Supported Development Environments
    System Configuration 1.1 supports the following development environments:
    • LabVIEW 2010/2009/8.6/8.5
    • LabVIEW Real-Time 2010/2009/8.6/8.5
    Using Measurement & Automation Explorer 4.7
    Measurement & Automation Explorer (MAX) is a configuration utility that provides access to your National Instruments devices. Also included is an API that can be used to programmatically perform certain tasks specific to MAX. The following sections describe this API.
    Supported Development Environments
    MAX 4.7 API supports the following development environments:
    • LabWindows™/CVI™ 10.0/9.0/8.5/8.1
    • Microsoft Visual Studio 2008/2005/2003
    Using Network Browser 1.1
    Network Browser is a utility for discovering and configuring National Instruments network-based devices and remote systems. The following sections describe this utility.
    Supported Browsers
    Network Browser 1.1 will work with the following browsers:
    • Internet Explorer 7 and later
    • Mozilla Firefox 3 and later
    • Google Chrome
    Network Browser 1.1 will NOT currently work with the following browsers:
    • Safari
    Known Issues and Bug Fixes
    For a listing of Known Issues of System Configuration 1.1, visit ni.com/info and enter the Info Code SysCfg11KnownIssues.
    For a listing of Bug Fixes for System Configuration 1.1, visit ni.com/info and enter the Info Code SysCfgFixList.
    For a listing of Known Issues of Measurement & Automation Explorer 4.7, visit ni.com/info and enter the Info Code MAX47KnownIssues.
    For a listing of Bug Fixes for Measurement & Automation Explorer 4.7, visit ni.com/info and enter the Info Code MAXFixList.
    Licenses and Notices
    These products contain third-party software for which the following licenses and notices apply:
    • MAX FOSS notices
    • mDNS Responder FOSS notices
    • NI Network Browser FOSS notices
    • Info-ZIP License

    Copyright
    © 2010 National Instruments Corporation. All rights reserved.
    Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
    National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
    Trademarks
    CVI, LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.
    FireWire® is the registered trademark of Apple Inc.
    Handle Graphics®, MATLAB®, Real-Time Workshop®, Simulink®, Stateflow®, and xPC TargetBox® are registered trademarks, and TargetBox™ and Target Language Compiler™ are trademarks of The MathWorks, Inc.
    Tektronix® and Tek are registered trademarks of Tektronix, Inc.
    The Bluetooth® word mark is a registered trademark owned by the Bluetooth SIG, Inc.
    The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
    Other product and company names mentioned herein are trademarks or trade names of their respective companies.
    Members of the National Instruments Alliance Partner Program are business entities independent from National Instruments and have no agency, partnership, or joint-venture relationship with National Instruments.
    Patents
    For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    《LabVIEW Vision函数实例详解》教程-NI Vision所有函数使用方法介绍,基于NI VISION2020,兼容VDM2021
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程10种全套
    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|机器视觉论坛VISIONBBS.COM|视觉之家VISIONHOME.CN|东莞市华动智能科技有限公司 ( 粤ICP备17078359号-2 )|网站地图

    GMT+8, 2021-10-25 00:38

    Powered by shixinhua.com X3.4

    © 2009-2021 VISIONBBS.COM 浏览量:

    快速回复 返回顶部 返回列表