机器视觉论坛VISIONBBS_视觉之家VISIONHOME微信公众号:石鑫华视觉网

 找回密码
 注册会员
查看: 110|回复: 0

[运行时与补丁] LabVIEW Electric Motor Simulation Toolkit 2014 Patch Win32Eng LabVIEW电动机仿真工具包补丁NIEMsim2014F1patch

[复制链接]
  • TA的每日心情
    无聊
    12 小时前
  • 签到天数: 2330 天

    连续签到: 2 天

    [LV.Master]2000FPS

    发表于 2021-9-8 22:28:49 | 显示全部楼层 |阅读模式

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有帐号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件模块工具包驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Acvivator来激活,以下链接可下载:
    NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
    http://visionbbs.com/thread-490-1-1.html

    视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
    文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
    http://visionbbs.com/thread-26524-1-1.html

    LabVIEW Electric Motor Simulation Toolkit 2014f1Patch Win32Eng LabVIEW电动机仿真工具包补丁NIEMsim2014F1patch
    LabVIEW电动机仿真工具包提供了开发桌面和硬件在环电动机系统仿真模型所需的建模元件。
    LabVIEW电机仿真工具包是LabVIEW和VeriStand的软件附件。它为电子仿真、控制和硬件在环(HIL)提供了LabVIEW项目模板,以及适用于各种电机类型的VeriStand软件附件。该工具包可帮助您在主机上执行模型,以进行桌面仿真、LabVIEW实时仿真和基于FPGA的仿真。电动机仿真工具包包括开关磁阻电动机(SRM)、应电机和永磁同步电机模型,这些模型可以是近乎线性的简单模型也可以是更高保真度的模型。

    NIEMsim2014f1patch
    发布日期
    2015/5/5
    包含的版本
    2014f1patch
    受支持的操作系统
    Windows 8
    Windows 7
    Windows Vista
    Windows XP
    Windows Server 2008 R2 64-bit
    Windows Server 2003 R2 32-bit
    应用程序位数
    32位
    语言
    英文
    校验和
    文件大小: 48662987 字节 (46.41 MB)
    修改日期: 2019-06-25 02:53
    MD5: 7cf145c88f6481378381a270adf8872b(官方正确)
    SHA1: 589820789be5168aba644883516aff32c316db60
    SHA256: ee040d8925e23d28f56b3651294c0e6bcf3552f4196192d190a0ef9017cd9dec
    CRC32: 25d017ba

    百度网盘和NI官方下载地址:
    EMsim2014patch.txt (634 Bytes, 下载次数: 0, 售价: 2 快钱)

    NI Electric Motor Simulation Toolkit 2014 f1 Patch Readme
    This file introduces you to the NI Electric Motor Simulation Toolkit 2014 f1 patch, which includes one fix.
    System Requirements
    Fixed Issues
    Modified Files
    Installation Instructions

    System Requirements
    You must install the NI Electric Motor Simulation Toolkit 2014 before you can install this patch. The same system requirements for the NI Electric Motor Simulation Toolkit 2014 apply to this patch. Refer to the NI Electric Motor Simulation Toolkit 2014 readme for more information about system requirements.
    Fixed Issues
    This patch fixes the following issue.
    • CAR 518078–FPGA PMSM FEA model can output incorrect torque and current values.
    Modified Files
    This patch modifies the following instalLED files. <NI DIR> is the location on the computer where NI software installs, such as C:\Program Files\National Instruments.
    LabVIEW Support
    • <NI DIR>\LabVIEW\vi.lib\addons\E-Motor Simulation\MotorClass\PMSM_FEA\Generate FPGA Data_Constants.vi
    • <NI DIR>\LabVIEW\vi.lib\addons\E-Motor Simulation\PMSM FEA FXP\Access DRAM_Prepare.vi
    • <NI DIR>\LabVIEW\vi.lib\addons\E-Motor Simulation\Utility\Convert Fractional Index to U16.vi
    • <NI DIR>\LabVIEW\vi.lib\addons\E-Motor Simulation\Utility\Generate Index LUT_Delta.vi
    VeriStand Support
    • Documents\National Instruments\VeriStand\Custom Devices\EMSim\PMSM FEA Model\PMSM FEA Model Configuration.llb
    • Documents\National Instruments\VeriStand\Custom Devices\EMSim\PMSM FEA Model\PMSM FEA Model Engine.llb
    • Documents\National Instruments\VeriStand\Custom Devices\EMSim\PMSM FEA Model\FPGA\PXIe-7965R PMSM FEA Model Simulator.lvbitx
    • Documents\National Instruments\VeriStand\Custom Devices\EMSim\PMSM FEA Model\FPGA\PXIe-7966R PMSM FEA Model Simulator.lvbitx
    • Documents\National Instruments\VeriStand\Custom Devices\EMSim\PMSM Variable Parameter Model\PMSM Variable Parameter Model Configuration.llb
    • Documents\National Instruments\VeriStand\Custom Devices\EMSim\PMSM Variable Parameter Model\PMSM Variable Parameter Model Engine.llb
    • Documents\National Instruments\VeriStand\Custom Devices\EMSim\SRM FEA Model\SRM FEA Model Configuration.llb
    • Documents\National Instruments\VeriStand\Custom Devices\EMSim\SRM FEA Model\SRM FEA Model Engine.llb
    Installation Instructions
    Complete the following steps to install the NI Electric Motor Simulation Toolkit 2014 f1 patch:
    Note  Some virus detection programs interfere with the installer. Disable any automatic virus detection programs before you install. After installation, check your computer for viruses and enable any virus detection programs you disabled.
    • Log in as an Administrator or as a user with administrator privileges.
    • Close LabVIEW.
    • Run the patch installer.
    • Restart LabVIEW.
    • Recompile the bitfile for PMSM FEA model simulation and download the bitfile to the FPGA target.

    Legal Information
    Copyright
    &#169; 2013–2015 National Instruments. All rights reserved.
    Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
    National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
    End-User License Agreements and Third-Party Legal Notices
    You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
    • Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
    • EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
    • Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
    U.S. Government Restricted Rights
    If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
    IVI Foundation Copyright Notice
    Content from the IVI specifications reproduced with permission from the IVI Foundation.
    The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
    Trademarks
    Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
    Patents
    For patents covering the National Instruments products/technology, refer to the appropriate location: Help&#187;Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    《LabVIEW Vision函数实例详解》教程-NI Vision所有函数使用方法介绍,基于NI VISION2020,兼容VDM2021
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程10种全套
    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|机器视觉论坛VISIONBBS.COM|视觉之家VISIONHOME.CN|东莞市华动智能科技有限公司 ( 粤ICP备17078359号-2 )|网站地图

    GMT+8, 2021-10-18 21:11

    Powered by shixinhua.com X3.4

    © 2009-2021 VISIONBBS.COM 浏览量:

    快速回复 返回顶部 返回列表