| Operators |
find_scaled_shape_models — Find the best matches of multiple isotropically scaled shape models.
find_scaled_shape_models(Image : : ModelIDs, AngleStart, AngleExtent, ScaleMin, ScaleMax, MinScore, NumMatches, MaxOverlap, SubPixel, NumLevels, Greediness : Row, Column, Angle, Scale, Score, Model)
The operator find_scaled_shape_models finds the best NumMatches instances of the isotropically scaled shape models that are passed in ModelIDs in the input image Image. The models must have been created previously by calling create_scaled_shape_model or read_shape_model. In contrast to find_scaled_shape_model, multiple models can be searched in the same image in one call.
The position, rotation, and scale of the found instances of the model are returned in Row, Column, Angle, and Scale. The score of each found instance is returned in Score. The type of the found instances of the models is returned in Model. For details see respective sections below.
Compared to find_scaled_shape_model, the semantics of all input parameters have changed to some extent. All input parameters must either contain one element, in which case the parameter is used for all models, or must contain the same number of elements as ModelIDs, in which case each parameter element refers to the corresponding element in ModelIDs. (NumLevels may also contain either two or twice the number of elements as ModelIDs.) More details can be found below in the sections containing information for the respective parameters. Note that a call to find_scaled_shape_models with multiple values for ModelIDs, NumMatches and MaxOverlap has the same effect as multiple independent calls to find_scaled_shape_model with the respective parameters. However, a single call to find_scaled_shape_models is considerably more efficient.
The domain of the Image determines the search space for the reference point of the model, i.e., for the center of gravity of the domain (region) of the image that was used to create the shape model with create_scaled_shape_model. A different origin set with set_shape_model_origin is not taken into account. The model is searched within those points of the domain of the image, in which the model lies completely within the image. This means that the model will not be found if it extends beyond the borders of the image, even if it would achieve a score greater than MinScore (see below). Note that, if for a certain pyramid level the model touches the image border, it might not be found even if it lies completely within the original image. As a rule of thumb, the model might not be found if its distance to an image border falls below . This behavior can be changed with set_system('border_shape_models','true') for all models or with set_shape_model_param(ModelID, 'border_shape_models','true') for a specific model, which will cause models that extend beyond the image border to be found if they achieve a score greater than MinScore. Here, points lying outside the image are regarded as being occluded, i.e., they lower the score. It should be noted that the runtime of the search will increase in this mode. Note further, that in rare cases, which occur typically only for artificial images, the model might not be found also if for certain pyramid levels the model touches the border of the reduced domain. Then, it may help to enlarge the reduced domain by using, e.g., dilation_circle.
As usual, the domain of the input Image is used to restrict the search space for the reference point of the models ModelIDs. Consistent with the above semantics, the input Image can therefore contain a single image object or an image object tuple containing multiple image objects. If Image contains a single image object, its domain is used as the region of interest for all models in ModelIDs. If Image contains multiple image objects, each domain is used as the region of interest for the corresponding model in ModelIDs. In this case, the images have to be identical except for their domains, i.e., Image cannot be constructed in an arbitrary manner using concat_obj, but must be created from the same image using add_channels or equivalent calls. If this is not the case, an error message is returned.
The parameters AngleStart and AngleExtent determine the range of rotations for which the model is searched. The parameters ScaleMin and ScaleMax determine the range of scales for which the model is searched. If necessary, both ranges are clipped to the range given when the model was created with create_scaled_shape_model. In particular, this means that the angle ranges of the model and the search must overlap.
Note that in some cases instances with a rotation or scale that is slightly outside the specified range are found. This may happen if the specified range is smaller than the range given during the creation of the model. AngleStart and AngleExtent as well as ScaleMin and ScaleMax are checked only at the highest pyramid level. Matches that are found on the highest pyramid level are refined to the lowest pyramid level. For performance reasons, however, during the refinement it is no longer checked whether the matches are still within the specified ranges.
The parameter MinScore determines what score a potential match must at least have to be regarded as an instance of the model in the image. The larger MinScore is chosen, the faster the search is. If the model can be expected never to be occluded in the images, MinScore may be set as high as 0.8 or even 0.9. If the matches are not tracked to the lowest pyramid level (see below) it might happen that instances with a score slightly below MinScore are found.
The maximum number of instances to be found can be determined with NumMatches. If more than NumMatches instances with a score greater than MinScore are found in the image, only the best NumMatches instances are returned. If fewer than NumMatches are found, only that number is returned, i.e., the parameter MinScore takes precedence over NumMatches. If all model instances exceeding MinScore in the image should be found, NumMatches must be set to 0.
If NumMatches contains one element, find_scaled_shape_models returns the best NumMatches instances of the model irrespective of the type of the model. If, for example, two models are passed in ModelIDs and NumMatches = 2 is selected, it can happen that two instances of the first model and no instances of the second model, one instance of the first model and one instance of the second model, or no instances of the first model and two instances of the second model are returned. If, on the other hand, NumMatches contains multiple values, the number of instances returned of the different models corresponds to the number specified in the respective entry in NumMatches. If, for example, NumMatches = [1,1] is selected, one instance of the first model and one instance of the second model is returned.
When tracking the matches through the image pyramid, on each level, some less promising matches are rejected based on NumMatches. Thus, it is possible that some matches are rejected that would have had a higher score on the lowest pyramid level. Due to this, for example, the found match for NumMatches set to 1 might be different from the match with the highest score returned when setting NumMatches to 0 or > 1.
If multiple objects with a similar score are expected, but only the one with the highest score should be returned, it might be preferable to raise NumMatches, and then select the match with the highest score.
If the model exhibits symmetries it may happen that multiple instances with similar positions but different rotations are found in the image. The parameter MaxOverlap determines by what fraction (i.e., a number between 0 and 1) two instances may at most overlap in order to consider them as different instances, and hence to be returned separately. If two instances overlap each other by more than MaxOverlap only the best instance is returned. The calculation of the overlap is based on the smallest enclosing rectangle of arbitrary orientation (see smallest_rectangle2) of the found instances. If MaxOverlap=0, the found instances may not overlap at all, while for MaxOverlap=1 all instances are returned.
If a single value is passed in MaxOverlap, the overlap is computed for all found instances of the different models, irrespective of the model type, i.e., instances of the same or of different models that overlap too much are eliminated. If, on the other hand, multiple values are passed in MaxOverlap, the overlap is only computed for found instances of the model that have the same model type, i.e., only instances of the same model that overlap too much are eliminated. In this mode, models of different types may overlap completely.
The parameter SubPixel determines whether the instances should be extracted with subpixel accuracy. If SubPixel is set to 'none' (or 'false' for backwards compatibility) the model's pose is only determined with pixel accuracy and the angle and scale resolution that was specified with create_scaled_shape_model. If SubPixel is set to 'interpolation' (or 'true') the position as well as the rotation and scale are determined with subpixel accuracy. In this mode, the model's pose is interpolated from the score function. This mode costs almost no computation time and achieves an accuracy that is high enough for most applications. In some applications, however, the accuracy requirements are extremely high. In these cases, the model's pose can be determined through a least-squares adjustment, i.e., by minimizing the distances of the model points to their corresponding image points. In contrast to 'interpolation', this mode requires additional computation time. The different modes for least-squares adjustment ('least_squares', 'least_squares_high', and 'least_squares_very_high') can be used to determine the accuracy with which the minimum distance is being searched. The higher the accuracy is chosen, the longer the subpixel extraction will take, however. Usually, SubPixel should be set to 'interpolation'. If least-squares adjustment is desired, 'least_squares' should be chosen because this results in the best tradeoff between runtime and accuracy.
Objects that are slightly deformed with respect to the model, in some cases cannot be found or are found but only with a low accuracy. For such objects it is possible to additionally pass a maximal allowable object deformation in the parameter SubPixel. The deformation must be specified in pixels. This can be done by passing the optional parameter value 'max_deformation ' followed by an integer value between 0 and 32 (in the same string), which specifies the maximum deformation. For example, if the shape of the object may be deformed by up to 2 pixels with respect to the shape that is stored in the model, the value 'max_deformation 2' must be passed in SubPixel in addition to the above described mode for the subpixel extraction, i.e., for example ['least_squares', 'max_deformation 2']. Passing the value 'max_deformation 0' corresponds to a search without allowing deformations, i.e., the behavior is the same as if no 'max_deformation ' is passed. Note that higher values for the maximum deformation often result in an increased runtime. Furthermore, the higher the deformation value is chosen, the higher is the risk of finding wrong model instances. Both problems mainly arise when searching for small objects or for objects with fine structures. This is because such kinds of objects for higher deformations lose their characteristic shape, which is important for a robust search. Also note that for higher deformations the accuracy of partially occluded objects might decrease if clutter is present close to the object. Consequently, the maximum deformation should be chosen as small as possible and only as high as necessary. Approximately rotationally symmetric objects may not be found if 'max_deformation' and AngleExtent are both set to a value greater than 0. In that case, ambiguities may occur that cannot be resolved, and the match is rejected as false. If this happens, try to set either 'max_deformation' or AngleExtent to 0, or adjust the model such that symmetries are reduced. When specifying a deformation higher than 0 the computation of the score depends on the chosen value for the subpixel extraction. In most cases, the score of a match changes if 'least_squares', 'least_squares_high', or 'least_squares_very_high' (see above) is chosen for the subpixel extraction (in comparison to 'none' or 'interpolation'). Furthermore, if one of the least-squares adjustments is selected the score might increase when increasing the maximum deformation because then for the model points more corresponding image points can be found. To get a meaningful score value and to avoid erroneous matches, we recommend to always combine the allowance of a deformation with a least-squares adjustment.
If the subpixel extraction and/or the maximum object deformation is specified separately for each model, for each model passed in ModelIDs exactly one value for the subpixel extraction must be passed in SubPixel. After each value for the subpixel extraction optionally a second value can be passed, which describes the maximum object deformation of the corresponding mode. If for a certain model no value for the maximum object deformation is passed, the model is searched without taking deformations into account. For example, if two models are passed in ModelIDs and for the first model the subpixel extraction is set to 'interpolation' and no object deformations are allowed and for the second model the subpixel extraction is set to 'least_squares' and a maximum object deformation of 3 pixels is allowed, then the tuple ['interpolation', 'least_squares', 'max_deformation 3'] must be passed in SubPixel. Alternatively, the equivalent tuple ['interpolation', 'max_deformation 0', 'least_squares', 'max_deformation 3'] may be passed.
The number of pyramid levels used during the search is determined with NumLevels. If necessary, the number of levels is clipped to the range given when the shape model was created with create_scaled_shape_model. If NumLevels is set to 0, the number of pyramid levels specified in create_scaled_shape_model is used.
In certain cases, the number of pyramid levels that was determined automatically with, for example, create_scaled_shape_model may be too high. The consequence may be that some matches that may have a high final score are rejected on the highest pyramid level and thus are not found. Instead of setting MinScore to a very low value to find all matches, it may be better to query the value of NumLevels with get_shape_model_params and then use a slightly lower value in find_scaled_shape_models. This approach is often better regarding the speed and robustness of the matching.
Optionally, NumLevels can contain a second value that determines the lowest pyramid level to which the found matches are tracked. Hence, a value of [4,2] for NumLevels means that the matching starts at the fourth pyramid level and tracks the matches to the second lowest pyramid level (the lowest pyramid level is denoted by a value of 1). This mechanism can be used to decrease the runtime of the matching. It should be noted, however, that in general the accuracy of the extracted pose parameters is lower in this mode than in the normal mode, in which the matches are tracked to the lowest pyramid level. Hence, if a high accuracy is desired, SubPixel should be set to at least 'least_squares'. If the lowest pyramid level to use is chosen too large, it may happen that the desired accuracy cannot be achieved, or that wrong instances of the model are found because the model is not specific enough on the higher pyramid levels to facilitate a reliable selection of the correct instance of the model. In this case, the lowest pyramid level to use must be set to a smaller value.
If the lowest pyramid level is specified separately for each model, NumLevels must contain twice the number of elements as ModelIDs. In this case, the number of pyramid levels and the lowest pyramid level must be specified interleaved in NumLevels. If, for example, two models are specified in ModelIDs, the number of pyramid levels is 5 for the first model and 4 for the second model, and the lowest pyramid level is 2 for the first model and 1 for the second model, NumLevels = [5,2,4,1] must be selected. If exactly two models are specified in ModelIDs, a special case occurs. If in this case the lowest pyramid level is to be specified, the number of pyramid levels and the lowest pyramid level must be specified explicitly for both models, even if they are identical, because specifying two values in NumLevels is interpreted as the explicit specification of the number of pyramid levels for the two models.
In input images of poor quality, i.e., in images that are, e.g., defocused, deformed, or noisy, often no instances of the shape model can be found on the lowest pyramid level. The reason for this behavior is the missing or deformed edge information which is a result of the poor image quality. Nevertheless, the edge information may be sufficient on higher pyramid levels. But keep in mind the above mentioned restrictions on accuracy and robustness if instances that were found on higher pyramid levels are used. The selection of the suitable pyramid level, i.e., the lowest pyramid level on which at least one instance of the shape model can be found, depends on the model and on the input image. This pyramid level may vary from image to image. To facilitate the matching on images of poor quality, the lowest pyramid level on which at least one instance of the model can be found can be determined automatically during the matching. To activate this mechanism, i.e., to use the so-called 'increased tolerance mode', the lowest pyramid level must be specified negatively in NumLevels. If, e.g., NumLevels is set to [5,2,4,-1], the lowest pyramid level for the first model is set to 2. If no instance of the first model can be found on this pyramid level, no result will be returned for this model. For the second shape model, the lowest pyramid level is set to -1. Therefore, an instance of the shape model is searched on the pyramid level 1. If no instance of the second model can be found on this pyramid level, the lowest pyramid level is determined on which at least one instance of the model can be found. The instances of this pyramid level will then be returned.
The parameter Greediness determines how “greedily” the search should be carried out. If Greediness=0, a safe search heuristic is used, which always finds the model if it is visible in the image and the other parameters are set appropriately. However, the search will be relatively time consuming in this case. If Greediness=1, an unsafe search heuristic is used, which may cause the model not to be found in rare cases, even though it is visible in the image. For Greediness=1, the maximum search speed is achieved. In almost all cases, the shape model will always be found for Greediness=0.9.
The position, rotation, and scale of the found instances of the model are returned in Row, Column, Angle, and Scale. The coordinates Row and Column are the coordinates of the origin of the shape model in the search image. By default, the origin is the center of gravity of the domain (region) of the image that was used to create the shape model with create_scaled_shape_model. A different origin can be set with set_shape_model_origin.
Note that the coordinates Row and Column do not exactly correspond to the position of the model in the search image. Thus, you cannot directly use them. Instead, the values are optimized for creating the transformation matrix with which you can use the results of the matching for various tasks, e.g., to align ROIs for other processing steps. The example given for find_scaled_shape_model shows how to create this matrix and use it to display the model at the found position in the search image and to calculate the exact coordinates.
Note also that for visualizing the model at the found position, also the procedure dev_display_shape_matching_results can be used.
The score of each found instance is returned in Score. The score is a number between 0 and 1, which is an approximate measure of how much of the model is visible in the image. If, for example, half of the model is occluded, the score cannot exceed 0.5.
The type of the found instances of the models is returned in Model. The elements of Model are indices into the tuple ModelIDs, i.e., they can contain values from 0 to |ModelIDs|-1. Hence, a value of 0 in an element of Model corresponds to an instance of the first model in ModelIDs.
Using the operator set_shape_model_param you can specify a 'timeout' for find_scaled_shape_models. If the shape models referenced by ModelIDs hold different values for 'timeout', find_scaled_shape_models uses the smallest one. If find_scaled_shape_models reaches this 'timeout', it terminates without results and returns the error code 9400 (H_ERR_TIMEOUT). Depending on the scaling range specified by ScaleMin and ScaleMax, find_scaled_shape_models needs a significant amount of time to free cached transformations if the shape model is not pregenerated. As this transformations have to be freed after a timeout occurs, the runtime of find_scaled_shape_models exceeds the value of the specified 'timeout' by this time.
Please note, that the different models that are given with the parameter ModelIDs should have been created with the same value of MinContrast. If they were created with different values for MinContrast, find_scaled_shape_models will use the smallest of these values.
To display the results found by shape-based matching, we highly recommend the usage of the procedure dev_display_shape_matching_results.
For an explanation of the different 2D coordinate systems used in HALCON, see the introduction of chapter Transformations / 2D Transformations.
Input image in which the models should be found.
Handle of the models.
Smallest rotation of the models.
Default value: -0.39
Suggested values: -3.14, -1.57, -0.79, -0.39, -0.20, 0.0
Extent of the rotation angles.
Default value: 0.78
Suggested values: 6.29, 3.14, 1.57, 0.79, 0.39, 0.0
Restriction: AngleExtent >= 0
Minimum scale of the models.
Default value: 0.9
Suggested values: 0.5, 0.6, 0.7, 0.8, 0.9, 1.0
Restriction: ScaleMin > 0
Maximum scale of the models.
Default value: 1.1
Suggested values: 1.0, 1.1, 1.2, 1.3, 1.4, 1.5
Restriction: ScaleMax >= ScaleMin
Minimum score of the instances of the models to be found.
Default value: 0.5
Suggested values: 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0
Typical range of values: 0 ≤ MinScore ≤ 1
Minimum increment: 0.01
Recommended increment: 0.05
Number of instances of the models to be found (or 0 for all matches).
Default value: 1
Suggested values: 0, 1, 2, 3, 4, 5, 10, 20
Maximum overlap of the instances of the models to be found.
Default value: 0.5
Suggested values: 0.0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0
Typical range of values: 0 ≤ MaxOverlap ≤ 1
Minimum increment: 0.01
Recommended increment: 0.05
Subpixel accuracy if not equal to 'none'.
Default value: 'least_squares'
Suggested values: 'none', 'interpolation', 'least_squares', 'least_squares_high', 'least_squares_very_high', 'max_deformation 1', 'max_deformation 2', 'max_deformation 3', 'max_deformation 4', 'max_deformation 5', 'max_deformation 6'
Number of pyramid levels used in the matching (and lowest pyramid level to use if |NumLevels| = 2).
Default value: 0
List of values: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10
“Greediness” of the search heuristic (0: safe but slow; 1: fast but matches may be missed).
Default value: 0.9
Suggested values: 0.0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0
Typical range of values: 0 ≤ Greediness ≤ 1
Minimum increment: 0.01
Recommended increment: 0.05
Row coordinate of the found instances of the models.
Column coordinate of the found instances of the models.
Rotation angle of the found instances of the models.
Scale of the found instances of the models.
Score of the found instances of the models.
Index of the found instances of the models.
read_image (Image, 'pcb_focus/pcb_focus_telecentric_061')
gen_rectangle1 (ROI_0, 236, 241, 313, 321)
gen_circle (ROI_1, 281, 653, 41)
reduce_domain (Image, ROI_0, ImageReduced1)
reduce_domain (Image, ROI_1, ImageReduced2)
create_scaled_shape_model (ImageReduced1,'auto', -0.39, 0.79, 'auto', 0.9, \
1.1, 'auto', 'auto', 'use_polarity', 'auto', \
'auto', ModelID1)
create_scaled_shape_model (ImageReduced2, 'auto', -0.39, 0.79, 'auto', 0.9,\
1.1, 'auto', 'auto', 'use_polarity', 'auto', \
'auto', ModelID2)
ModelIDs:=[ModelID1, ModelID2]
find_scaled_shape_models (Image, ModelIDs, -0.39, 0.78, 0.9, 1.1, 0.5, 1, \
0.5, 'least_squares', 0, 0.9, Row, Column, Angle,\
Scale, Score, Model)
* Display results
dev_display_shape_matching_results (ModelIDs, 'red', Row, Column, Angle, \
Scale, 1, Model)
If the parameter values are correct, the operator find_scaled_shape_models returns the value 2 (H_MSG_TRUE). If the input is empty (no input images are available) the behavior can be set via set_system('no_object_result',<Result>). If necessary, an exception is raised.
add_channels, create_scaled_shape_model, read_shape_model, set_shape_model_origin
find_shape_models, find_aniso_shape_models, find_shape_model, find_scaled_shape_model, find_aniso_shape_model, find_ncc_model, find_ncc_models
set_system, get_system, set_shape_model_param
Matching
| Operators |