LabVIEW 2010SP1 Real-Time Module LV2010SP1实时模块RealTime2010SP1 Win32Eng 32位Windows英文版下载

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

LabVIEW 2010SP1 Real-Time Module LV2010SP1实时模块RealTime2010SP1 Win32Eng 32位Windows英文版下载

LabVIEW Real-Time模块可帮助您创建在嵌入式硬件设备上执行的可靠、独立的应用程序。
LabVIEW Real-Time模块是LabVIEW编程环境的一个附加软件，可用于创建和部署用于测试、监测和控制的实时分布式系统应用程序。您可以利用实时操作系统来确保独立系统的可靠性和精确定时。数百个事先编写好的LabVIEW库和硬件API还可以帮助您节省宝贵的开发时间以及实现确定性数据采集。
LabVIEW Real-Time模块为创建可靠独立的嵌入式系统提供了基于图形化编程方法的完整解决方案。 作为LabVIEW开发平台的附加模块，LabVIEW Real-Time模块有助开发和调试图形化应用程序，并将这些程序下载到嵌入式硬件设备（如：CompactRIO、Single-Board RIO、PXI、视觉系统，乃至第三方PC）上执行。

使用LabVIEW Real-Time模块的三大理由:
1. 将LabVIEW图形化编程扩展至独立的嵌入式系统
LabVIEW Real-Time包含了用于多线程和实时线程调度的内置结构，以帮助您高效地编写稳定、确定的代码。 您可对独立式系统进行图形化编程，使其更长时间地可靠运行。

2. 利用实时操作系统实现精确的定时和高可靠性
通用操作系统并不适用于需要严格定时的重要应用。 LabVIEW Real-Time可支持运行NI Linux Real-Time、VxWorks或Phar Lap ETS实时操作系统(RTOS)的NI嵌入式硬件。

3. 利用各类IP和实时硬件驱动
您可使用数百个预编写的LabVIEW函数库，比如PID控制和FFT，并用于独立式系统。 NI还提供了大量实时硬件驱动程序和LabVIEW API，适用于大多数NI I/O模块，以实现确定的数据采集。

百度网盘下载地址（限速，请开会员或使用破解限速工具）：
链接: 请注册视觉论坛用户，登录后购买附件下载查看，充值请联系在线客服 提取码: 请注册登录视觉论坛会员，购买附件查看

NI官方下载地址（可能无效或无法下载完成）：
请注册登录视觉论坛会员，购买附件查看
RT2010SP1E.txt (259 Bytes, 下载次数: 0, 售价: 10 元)

2020-7-1 17:17 上传

点击文件名下载附件
RT2010SP1E

LabVIEW 2010 SP1 Real-Time Module Readme

Version 10.0.1

December 2010

This file contains important information about the LabVIEW 2010 SP1 Real-Time Module.

Supported Platforms
Installation
Licensing
Real-Time Operating System Versions
Upgrade and Compatibility Issues
Known Issues
Bug Fixes

Supported Platforms

The Real-Time Module supports the following operating systems for application development:

• Windows 7 (32-bit and 64-bit)
• Windows Vista (32-bit and 64-bit)
• Windows XP
• Windows Server 2003 R2 (32-bit)
• Windows Server 2008 R2 (64-bit)
  

Note  Support for Windows Server 2003 R2 may require disabling physical address extensions (PAE). To learn how this might affect your use of Windows Server 2003 and what actions you might have to take, visit ni.com/info and enter the info code PAESupport.

Note  The Real-Time Module does not support Windows NT/Me/9x. The Real-Time Module also does not support the Windows Server non-R2 editions.

Installation

You can install all of your LabVIEW products—including the LabVIEW Real-Time Module—using the LabVIEW 2010 Platform DVDs. You can find installation instructions for the Real-Time Module along with activation instructions in the following locations:

• LabVIEW Real-Time Module Release and Upgrade Notes, which are available in your LabVIEW Real-Time Module software kit or online at ni.com/manuals.
• LabVIEW Release Notes, which are available in your LabVIEW software kit.
• LabVIEW 2010 Platform DVDs Readme, which is available on the top-level of LabVIEW Platform DVD 1.
  

To request additional LabVIEW 2010 Platform DVDs, refer to the National Instruments Web site.

Note: If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.

Refer to the LabVIEW Real-Time Module Release and Upgrade Notes for more information about upgrade and compatibility issues, a list of new features, and installation instructions. The LabVIEW Real-Time Module Release and Upgrade Notes is included as a printed booklet with the kit. You also can access the LabVIEW Real-Time Module Release and Upgrade Notes by selecting Help»Search the LabVIEW Help in LabVIEW and navigating to the Real-Time Module»Real-Time Module Related Documentation topic on the Contents tab.

Installing and Configuring Japanese Language Support

After you install the LabVIEW Real-Time Module 2010 on your development computer, you can complete the following steps to install and configure Japanese language support on an RT target.

• Use the LabVIEW Real-Time Software Wizard in NI Measurement & Automation Explorer to install the Language Support for Japanese software component on the RT target. Refer to the NI Measurement & Automation Explorer Help for information about the LabVIEW Real-Time Software Wizard.
• Open the System Settings tab and select Japanese as the Locale.
  

Installing Language Support for Japanese does not enable Japanese language support within the RT target file system. You cannot use Japanese characters in directory names or file names on the RT target.

Licensing

The LabVIEW Real-Time Module relies on licensing activation. You must activate a valid LabVIEW Real-Time Module license before you can run the LabVIEW Real-Time Module. To activate the LabVIEW Real-Time Module, use the serial number you received as part of your installation package.

Refer to the Activation Instructions for National Instruments Software for more information about licensing activation.

Real-Time Operating System Versions

The Real-Time Module 2010 installs the following RT target operating systems. Refer to the specific RT target hardware documentation for information about which real-time operating system your RT target uses.

• NI ETS 13.1
• VxWorks 6.3
  

Supported Real-Time Operating System Features

The Real-Time Module supports only a subset of the features that the ETS and VxWorks operating systems support. Refer to the Real-Time Module book on the Contents tab in the LabVIEW Help for information about features that the Real-Time Module supports.

Upgrade and Compatibility Issues

Refer to the LabVIEW Real-Time Module Release and Upgrade Notes for information about upgrade and compatibility issues. The LabVIEW Real-Time Module Release and Upgrade Notes is included as a printed booklet with the kit. You also can access the LabVIEW Real-Time Module Release and Upgrade Notes by selecting Help»Search the LabVIEW Help in LabVIEW and navigating to the Real-Time Module»Real-Time Module Related Documentation topic on the Contents tab.

Known Issues

This section includes information about known issues for the LabVIEW 2010 Real-Time Module.

MathScript Probe Support

The LabVIEW 2010 MathScript RT Module adds support for the Variables page of the MathScript probe on RT targets. However, the Real-Time Module Help still indicates that MathScript probes are not supported on RT targets.

You can access the complete software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in the LabVIEW 2010 Real-Time Module.

Bug Fixes

The following items are the IDs and titles of a subset of issues fixed in the RT Module 2010 SP1.

ID	Fixed Issue
234786	Network streams fail to reconnect after some network interruptions
243651	VxWorks crashes with classes in source distribution
255645	Desktop Utility USB Drive formats first enumerated drive regardless of user selection
238528	Phar Lap targets fails to boot after USB system replication restore applied

The following items are the IDs and titles of a subset of issues fixed in the RT Module 2010.

ID	Fixed Issue
128039	HDDs not identified as Controller0 fail in RT
221963	Desktop PC Evaluator for RT-Module 2009 SP1 fails: "Unable to create process for format/replication procedure"
127150	Add deployment option in project for RT source distributions
136654	Abnormal Increase of CPU load on a PXI-8186 RT with LV 8.5
158524	Unable to bind a control to function block variables
160689	Memory Leak with To Variant and Variant to String VIs on cFP-2220
173723	RTSet Date and Time.vi for RT doesn't like the context menu for RT Utilities Palette
173046	Code with many reentrant sub-VI's and timed loops crashes PXI RT system
181653	Add a special meesage to the crash log and crash dump for ExitProcess on PharLap (DAbort does)
192032	Error -1: Unknown drive I/0 error when formating a IDE CompactFlash hard drive for 8.6 RTPC
45336	Export raw ping functionlity in PharLap
199041	The Desktop PC Utility USB drive can hang with over 2GB of memory
201244	Stop Timed Structure gives error -804 for reentrant SubVIs
195089	Unable to Use LV 2009 Desktop PC Utility USB Drive with NI 8353
194232	Over 20 probes in debuggable real-time VI causes target to disconnect
199420	RT Create Target Disk Image.vi disregards capitalization in filenames
196547	Memory leak when loading lvuste.dll by way of call library function node
211484	Synchronize with Scan Engine Configuration Gives Invalid Options and Can Cause the cRIO to Crash
216319	Adding Source Distribution that has licensed VIs in it to an Installer will add a folder with the same name as the dependent library and throw an error during install
192986	RT FIFOs do not support waveforms with Y arrays other than DBL & I16 datatype
104454	Cannot Open VI Server Reference on Embedded Controller Running VxWorks 6.3
217634	Zip packaging of RTEXEs increased memory utilization on target by 20%

---

Important Information

Copyright

© 2010 National Instruments Corporation. All rights reserved.

For copyright notices, conditions, and disclaimers, including information regarding certain third-party components used in the NI Real-Time Hypervisor, refer to the Copyright topic of the LabVIEW Help.

Trademarks

LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.

Patents

For patents covering the National Instruments products, refer to ni.com/patents.